Chicago Pneumatic CP869
Chicago Pneumatic CP869
This tool is unavailable for purchase, but replacement parts may be available below.
7" Air Angle Sander
This product has been discontinued with limited quantity available.
Replacement Parts
Details
Accessories
Warranty & Documentation
| Ref # | Part | Price |
|---|---|---|
* | SPANNER WRENCH 19MM | $17.22 |
Out of Stock | ||
1 | INLET BUSHING | $4.50 |
In Stock | ||
2 | DEFLECTOR | $18.00 |
Out of Stock | ||
3 | MOTOR HOUSING | $195.55 |
Out of Stock | ||
7 | PIN | $4.68 |
Out of Stock | ||
9 | BUSHING | $9.00 |
Out of Stock | ||
10 | THROTTLE VALVE | $16.27 |
Out of Stock | ||
11 | O-RING | $2.98 |
Out of Stock | ||
12 | SPRING | $5.88 |
Out of Stock | ||
13 | REGULATOR | $11.80 |
Out of Stock | ||
14 | O-RING | $2.97 |
Out of Stock | ||
15 | O-RING | $2.15 |
Out of Stock | ||
16 | PLUG | $14.82 |
In Stock (Only 2 left) | ||
17 | GASKET | $6.14 |
Out of Stock | ||
18 | BEARING RETAINER/END PLATE CAP | $5.62 |
In Stock (Only 1 left) | ||
19 | RETAINING RING | $2.96 |
Out of Stock | ||
20 | BEARING | $15.76 |
Out of Stock | ||
21 | REAR END PLATE | $32.52 |
In Stock (Only 1 left) | ||
22 | ROTOR BLADES (SET OF 4) | $24.85 |
In Stock (Only 1 left) | ||
23 | ROTOR | $73.80 |
Out of Stock | ||
24 | DOWEL | $2.93 |
Out of Stock | ||
25 | LINER | $102.07 |
Out of Stock | ||
26 | FRONT END PLATE | $30.39 |
Out of Stock | ||
27 | NUT | $16.88 |
In Stock (Only 2 left) | ||
28 | SPACER-BEARING | $17.22 |
Out of Stock | ||
29 | BALL BEARING | $22.66 |
Out of Stock | ||
30 | BEVEL GEAR SHAFT (12T) | $81.03 |
In Stock (Only 2 left) | ||
30A | BEVEL GEAR SHAFT (8T) | $95.92 |
Out of Stock | ||
31 | LOCKWASHER | $2.25 |
Out of Stock | ||
32 | SCREW | $3.09 |
Out of Stock | ||
33 | HOUSING | $141.81 |
Out of Stock | ||
34 | SIDE DEAD HANDLE - 9/16" x 12 THREAD | $38.43 |
Out of Stock | ||
35 | NEEDLE BEARING | $30.39 |
Out of Stock | ||
36 | RETAINING RING | $2.93 |
Out of Stock | ||
37 | WASHER-SPRING | $4.47 |
Out of Stock | ||
38 | GEAR (43T) | $90.04 |
Out of Stock | ||
38A | GEAR (57T) | $154.95 |
Out of Stock | ||
39 | BUSHING | $27.01 |
In Stock (Only 2 left) | ||
40 | BEARING | $33.76 |
Out of Stock | ||
41 | KEY | $5.92 |
Out of Stock | ||
42 | SPINDLE | $57.40 |
Out of Stock | ||
43 | COVER GASKET | $7.38 |
Out of Stock | ||
44 | COVER | $11.26 |
Out of Stock | ||
45 | SCREW | $4.47 |
Out of Stock | ||
46 | 7" BACKUP PAD & NUT | $21.95 |
Out of Stock | ||
47 | 7" BACKING PAD NUT | $14.76 |
Out of Stock | ||
48 | PAD 8" POLISHING BONNET | $45.46 |
Out of Stock | ||
Model #CP869
BrandChicago Pneumatic
Tool Type7" Angle Sander
Powered ByAir
Weight6 lbs. / 2.72 kg
We Service? Yes Submit Order
No accessories found for this tool model.
Warranty
Warranty Duration: 1 Year
Documentation
Replacement Parts
| Ref # | Part | Price |
|---|---|---|
* | SPANNER WRENCH 19MM | $17.22 |
Out of Stock | ||
1 | INLET BUSHING | $4.50 |
In Stock | ||
2 | DEFLECTOR | $18.00 |
Out of Stock | ||
3 | MOTOR HOUSING | $195.55 |
Out of Stock | ||
7 | PIN | $4.68 |
Out of Stock | ||
9 | BUSHING | $9.00 |
Out of Stock | ||
10 | THROTTLE VALVE | $16.27 |
Out of Stock | ||
11 | O-RING | $2.98 |
Out of Stock | ||
12 | SPRING | $5.88 |
Out of Stock | ||
13 | REGULATOR | $11.80 |
Out of Stock | ||
14 | O-RING | $2.97 |
Out of Stock | ||
15 | O-RING | $2.15 |
Out of Stock | ||
16 | PLUG | $14.82 |
In Stock (Only 2 left) | ||
17 | GASKET | $6.14 |
Out of Stock | ||
18 | BEARING RETAINER/END PLATE CAP | $5.62 |
In Stock (Only 1 left) | ||
19 | RETAINING RING | $2.96 |
Out of Stock | ||
20 | BEARING | $15.76 |
Out of Stock | ||
21 | REAR END PLATE | $32.52 |
In Stock (Only 1 left) | ||
22 | ROTOR BLADES (SET OF 4) | $24.85 |
In Stock (Only 1 left) | ||
23 | ROTOR | $73.80 |
Out of Stock | ||
24 | DOWEL | $2.93 |
Out of Stock | ||
25 | LINER | $102.07 |
Out of Stock | ||
26 | FRONT END PLATE | $30.39 |
Out of Stock | ||
27 | NUT | $16.88 |
In Stock (Only 2 left) | ||
28 | SPACER-BEARING | $17.22 |
Out of Stock | ||
29 | BALL BEARING | $22.66 |
Out of Stock | ||
30 | BEVEL GEAR SHAFT (12T) | $81.03 |
In Stock (Only 2 left) | ||
30A | BEVEL GEAR SHAFT (8T) | $95.92 |
Out of Stock | ||
31 | LOCKWASHER | $2.25 |
Out of Stock | ||
32 | SCREW | $3.09 |
Out of Stock | ||
33 | HOUSING | $141.81 |
Out of Stock | ||
34 | SIDE DEAD HANDLE - 9/16" x 12 THREAD | $38.43 |
Out of Stock | ||
35 | NEEDLE BEARING | $30.39 |
Out of Stock | ||
36 | RETAINING RING | $2.93 |
Out of Stock | ||
37 | WASHER-SPRING | $4.47 |
Out of Stock | ||
38 | GEAR (43T) | $90.04 |
Out of Stock | ||
38A | GEAR (57T) | $154.95 |
Out of Stock | ||
39 | BUSHING | $27.01 |
In Stock (Only 2 left) | ||
40 | BEARING | $33.76 |
Out of Stock | ||
41 | KEY | $5.92 |
Out of Stock | ||
42 | SPINDLE | $57.40 |
Out of Stock | ||
43 | COVER GASKET | $7.38 |
Out of Stock | ||
44 | COVER | $11.26 |
Out of Stock | ||
45 | SCREW | $4.47 |
Out of Stock | ||
46 | 7" BACKUP PAD & NUT | $21.95 |
Out of Stock | ||
47 | 7" BACKING PAD NUT | $14.76 |
Out of Stock | ||
48 | PAD 8" POLISHING BONNET | $45.46 |
Out of Stock | ||
Details
Model #CP869
BrandChicago Pneumatic
Tool Type7" Angle Sander
Powered ByAir
Weight6 lbs. / 2.72 kg
We Service? Yes Submit Order
Accessories
No accessories found for this tool model.
Warranty & Documentation
Warranty
Warranty Duration: 1 Year