Ingersoll-Rand IR280S-6
Ingersoll-Rand IR280S-6
This tool is unavailable for purchase, but replacement parts may be available below.
1" Drive Air Impact Wrench
This product is obsolete; part availability is limited.
Replacement Parts
Details
Accessories
Warranty & Documentation
| Ref # | Part | Price |
|---|---|---|
1 | HANDLE | $486.42 |
Out of Stock | ||
2 | GREASE FITTING | $5.73 |
In Stock (Only 1 left) | ||
5 | INSIDE TRIGGER | $20.12 |
Out of Stock | ||
6 | PIN | $3.32 |
In Stock (Only 3 left) | ||
7 | THROTTLE VALVE PLUNGER | $31.39 |
Out of Stock | ||
8 | THROTTLE VALVE ASSY | $118.29 |
In Stock (Only 1 left) | ||
9 | THROTTLE VALVE FACE | $3.87 |
Out of Stock | ||
10 | SPRING | $9.25 |
In Stock | ||
11 | STRAIGHT INLET | $66.45 |
Out of Stock | ||
12 | AIR STRAINER SCREEN | $7.40 |
Out of Stock | ||
13 | GASKET | $3.87 |
Out of Stock | ||
15 | HOUSING COVER GASKET | $10.25 |
In Stock (Only 1 left) | ||
16 | MOTOR CLAMP WASHER | $60.25 |
Out of Stock | ||
17 | REAR END PLATE | $207.83 |
Out of Stock | ||
18 | BEARING | $15.14 |
Out of Stock | ||
19 | ROTOR | $548.33 |
Out of Stock | ||
20 | ROTOR BLADES (SET OF 6) | $81.23 |
In Stock (Only 5 left) | ||
21 | CYLINDER | $543.91 |
Out of Stock | ||
22 | FRONT END PLATE | $200.10 |
Out of Stock | ||
23 | BEARING | $25.09 |
Out of Stock | ||
24 | CYLINDER DOWEL | $12.60 |
Out of Stock | ||
25 | HOUSING | $888.82 |
Out of Stock | ||
26 | REVERSE VALVE BUSH | $173.56 |
Out of Stock | ||
27 | AIR PORT GASKET | $7.68 |
In Stock | ||
28 | AIR PORT GASKET RET. | $3.87 |
In Stock | ||
29 | REVERSE LEVER | $20.12 |
Out of Stock | ||
30 | PLUNGER | $11.39 |
In Stock (Only 5 left) | ||
31 | SPRING | $1.50 |
In Stock | ||
32 | REVERSE VALVE ASSY | $186.83 |
Out of Stock | ||
33 | SEAL | $4.30 |
In Stock (Only 1 left) | ||
34 | HAMMER CASE ASSY | $636.77 |
Out of Stock | ||
35 | HAMMER CASE BUSHING | $40.66 |
Out of Stock | ||
35A | LABEL | $5.09 |
Out of Stock | ||
36 | HAMMER CASE GASKET | $6.50 |
In Stock (Only 3 left) | ||
37 | SCREWS (SET OF 4) | $14.04 |
Out of Stock | ||
38 | WASHER | $1.50 |
In Stock | ||
39 | SCREW | $1.50 |
Out of Stock | ||
40 | WASHER | $1.50 |
Out of Stock | ||
41 | HAMMER FRAME ASSY | $465.42 |
In Stock (Only 1 left) | ||
42 | HAMMER PIN | $41.34 |
Out of Stock | ||
50 | SPLINE DRIVE ANVIL - 6" | $569.33 |
Out of Stock | ||
51 | SPRING | $7.65 |
In Stock (Only 4 left) | ||
52 | BALL IND | $6.68 |
Out of Stock | ||
53 | RETAINING BALL PLUNGER | $92.74 |
Out of Stock | ||
54 | PLUNGER RETAINING PIN | $3.87 |
Out of Stock | ||
Model #IR280S-6
BrandIngersoll-Rand
Tool Type1" Impact Wrench
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes Submit Order
No accessories found for this tool model.
Warranty
Warranty Duration: 2 Years
Documentation
Replacement Parts
| Ref # | Part | Price |
|---|---|---|
1 | HANDLE | $486.42 |
Out of Stock | ||
2 | GREASE FITTING | $5.73 |
In Stock (Only 1 left) | ||
5 | INSIDE TRIGGER | $20.12 |
Out of Stock | ||
6 | PIN | $3.32 |
In Stock (Only 3 left) | ||
7 | THROTTLE VALVE PLUNGER | $31.39 |
Out of Stock | ||
8 | THROTTLE VALVE ASSY | $118.29 |
In Stock (Only 1 left) | ||
9 | THROTTLE VALVE FACE | $3.87 |
Out of Stock | ||
10 | SPRING | $9.25 |
In Stock | ||
11 | STRAIGHT INLET | $66.45 |
Out of Stock | ||
12 | AIR STRAINER SCREEN | $7.40 |
Out of Stock | ||
13 | GASKET | $3.87 |
Out of Stock | ||
15 | HOUSING COVER GASKET | $10.25 |
In Stock (Only 1 left) | ||
16 | MOTOR CLAMP WASHER | $60.25 |
Out of Stock | ||
17 | REAR END PLATE | $207.83 |
Out of Stock | ||
18 | BEARING | $15.14 |
Out of Stock | ||
19 | ROTOR | $548.33 |
Out of Stock | ||
20 | ROTOR BLADES (SET OF 6) | $81.23 |
In Stock (Only 5 left) | ||
21 | CYLINDER | $543.91 |
Out of Stock | ||
22 | FRONT END PLATE | $200.10 |
Out of Stock | ||
23 | BEARING | $25.09 |
Out of Stock | ||
24 | CYLINDER DOWEL | $12.60 |
Out of Stock | ||
25 | HOUSING | $888.82 |
Out of Stock | ||
26 | REVERSE VALVE BUSH | $173.56 |
Out of Stock | ||
27 | AIR PORT GASKET | $7.68 |
In Stock | ||
28 | AIR PORT GASKET RET. | $3.87 |
In Stock | ||
29 | REVERSE LEVER | $20.12 |
Out of Stock | ||
30 | PLUNGER | $11.39 |
In Stock (Only 5 left) | ||
31 | SPRING | $1.50 |
In Stock | ||
32 | REVERSE VALVE ASSY | $186.83 |
Out of Stock | ||
33 | SEAL | $4.30 |
In Stock (Only 1 left) | ||
34 | HAMMER CASE ASSY | $636.77 |
Out of Stock | ||
35 | HAMMER CASE BUSHING | $40.66 |
Out of Stock | ||
35A | LABEL | $5.09 |
Out of Stock | ||
36 | HAMMER CASE GASKET | $6.50 |
In Stock (Only 3 left) | ||
37 | SCREWS (SET OF 4) | $14.04 |
Out of Stock | ||
38 | WASHER | $1.50 |
In Stock | ||
39 | SCREW | $1.50 |
Out of Stock | ||
40 | WASHER | $1.50 |
Out of Stock | ||
41 | HAMMER FRAME ASSY | $465.42 |
In Stock (Only 1 left) | ||
42 | HAMMER PIN | $41.34 |
Out of Stock | ||
50 | SPLINE DRIVE ANVIL - 6" | $569.33 |
Out of Stock | ||
51 | SPRING | $7.65 |
In Stock (Only 4 left) | ||
52 | BALL IND | $6.68 |
Out of Stock | ||
53 | RETAINING BALL PLUNGER | $92.74 |
Out of Stock | ||
54 | PLUNGER RETAINING PIN | $3.87 |
Out of Stock | ||
Details
Model #IR280S-6
BrandIngersoll-Rand
Tool Type1" Impact Wrench
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes Submit Order
Accessories
No accessories found for this tool model.
Warranty & Documentation
Warranty
Warranty Duration: 2 Years