Hutchins 2000
Hutchins 2000
This tool is unavailable for purchase, but replacement parts may be available below.
Air Straight Line Sander
Replacement Parts
Details
Accessories
Warranty & Documentation
.jpg)
| Ref # | Part | Price |
|---|---|---|
1203S | PAD NUTS (SET OF 2) | $6.80 |
In Stock (Only 2 left) | ||
1204 | CARRIER | $93.90 |
In Stock (Only 1 left) | ||
1207S | 4-PC WARE STRIP SET | $19.76 |
In Stock | ||
1209 | IDLER GEAR | $25.85 |
In Stock (Only 9 left) | ||
1210-1 | TIMING DRIVE SHAFT | $25.84 |
In Stock (Only 3 left) | ||
1211 | PISTON | $53.36 |
In Stock (Only 5 left) | ||
1212S | PISTON RINGS (SET OF 2) | $16.85 |
In Stock (Only 4 left) | ||
1213S | LUBRICATOR PADS (SET OF 2) | $8.22 |
In Stock (Only 2 left) | ||
1214 | PLATE | $32.38 |
In Stock (Only 2 left) | ||
1215 | BARE MOTOR BLOCK | $269.67 |
Out of Stock | ||
1217 | FRONT END PLATE | $86.27 |
Out of Stock | ||
1217S | SPRING | $7.18 |
In Stock (Only 3 left) | ||
1218 | REAR END PLATE | $82.55 |
Out of Stock | ||
1220S | GASKETS (SET OF 2) | $8.05 |
In Stock (Only 2 left) | ||
1221S | END PLATE SCREWS (SET OF 8) | $15.61 |
In Stock (Only 2 left) | ||
1221-1 | TIMING SECTOR MOUNT SCREWS (SET OF 2 DIFFERENT SIZES) | $5.23 |
Out of Stock | ||
1222 | EXHAUST TUBE GASKET | $5.09 |
In Stock (Only 4 left) | ||
1223 | EXHAUST TUBE | $34.19 |
Out of Stock | ||
1225 | TIMING PLATE | $21.85 |
In Stock (Only 2 left) | ||
1227 | TIMING GEAR | $9.14 |
In Stock (Only 2 left) | ||
1228S | TIMING SECTOR SET | $24.66 |
In Stock (Only 2 left) | ||
1232 | COVER GASKET | $4.61 |
In Stock (Only 5 left) | ||
1233 | HANDLE HOUSING | $73.84 |
In Stock (Only 1 left) | ||
1234S | HANDLE HOUSING SCREWS (SET OF 4) | $9.94 |
Out of Stock | ||
1235S | SIDE RAILS (SET OF 2) | $25.17 |
In Stock (Only 1 left) | ||
1236S | RAIL SCREWS (SET OF 12) | $15.46 |
In Stock (Only 3 left) | ||
1238 | TIMING PLATE SCREWS (SET OF 2) | $6.76 |
In Stock | ||
1240 | VALVE PLATE BUSHING | $6.48 |
In Stock (Only 9 left) | ||
1241S | COUNTERWEIGHT GUIDE SET (2 PC) | $18.03 |
In Stock (Only 2 left) | ||
1242 | COUNTERWEIGHT BAR | $61.38 |
In Stock (Only 5 left) | ||
1243S | SCREWS (SET OF 2) | $5.85 |
Out of Stock | ||
1244 | TIMING STUD | $5.81 |
Out of Stock | ||
1246 | WARE PLATE | $26.84 |
Out of Stock | ||
1252 | TIMING SHAFT ROLL PIN | $3.53 |
In Stock (Only 1 left) | ||
1257 | SL PAD ATTACHING SCREW SET | $4.64 |
Out of Stock | ||
1257C | CENTER PAD SCREW ONLY | $2.46 |
Out of Stock | ||
1829 | TRIGGER | $6.73 |
Out of Stock | ||
1830S | BUTTON HEAD CAP SCREWS (SET OF 2) | $2.52 |
In Stock (Only 3 left) | ||
1832 | AIR VALVE | $8.49 |
Out of Stock | ||
1833 | THROTTLE SPRING | $4.64 |
In Stock (Only 2 left) | ||
1838-1 | STEEL HANDLE | $12.86 |
Out of Stock | ||
1840 | RED HANDLE GRIP | $6.13 |
In Stock (Only 2 left) | ||
1841-1 | INLET FITTING | $5.46 |
Out of Stock | ||
1906S | CLAMP SET (2) w/SCREWS (4) | $27.45 |
Out of Stock | ||
1935 | HOLD DOWN CLAMP | $3.28 |
In Stock (Only 1 left) | ||
1934S | SCREWS (SET OF 2) | $1.57 |
Out of Stock | ||
1937 | AIR CONTROL VALVE | $9.66 |
Out of Stock | ||
5003 | STANDARD STRAIGHT-LINE PAD (HUT2000 CLIP IT) | $54.48 |
Out of Stock | ||
5301-1 | VA CONNECTOR | $22.09 |
Out of Stock | ||
Model #2000
BrandHutchins
Tool TypeStraight Line Sander
Powered ByAir
Weight7 lbs. / 3.18 kg
We Service? Yes Submit Order
No accessories found for this tool model.
Warranty
Warranty Duration: 1 Year
Documentation
Replacement Parts
| Ref # | Part | Price |
|---|---|---|
1203S | PAD NUTS (SET OF 2) | $6.80 |
In Stock (Only 2 left) | ||
1204 | CARRIER | $93.90 |
In Stock (Only 1 left) | ||
1207S | 4-PC WARE STRIP SET | $19.76 |
In Stock | ||
1209 | IDLER GEAR | $25.85 |
In Stock (Only 9 left) | ||
1210-1 | TIMING DRIVE SHAFT | $25.84 |
In Stock (Only 3 left) | ||
1211 | PISTON | $53.36 |
In Stock (Only 5 left) | ||
1212S | PISTON RINGS (SET OF 2) | $16.85 |
In Stock (Only 4 left) | ||
1213S | LUBRICATOR PADS (SET OF 2) | $8.22 |
In Stock (Only 2 left) | ||
1214 | PLATE | $32.38 |
In Stock (Only 2 left) | ||
1215 | BARE MOTOR BLOCK | $269.67 |
Out of Stock | ||
1217 | FRONT END PLATE | $86.27 |
Out of Stock | ||
1217S | SPRING | $7.18 |
In Stock (Only 3 left) | ||
1218 | REAR END PLATE | $82.55 |
Out of Stock | ||
1220S | GASKETS (SET OF 2) | $8.05 |
In Stock (Only 2 left) | ||
1221S | END PLATE SCREWS (SET OF 8) | $15.61 |
In Stock (Only 2 left) | ||
1221-1 | TIMING SECTOR MOUNT SCREWS (SET OF 2 DIFFERENT SIZES) | $5.23 |
Out of Stock | ||
1222 | EXHAUST TUBE GASKET | $5.09 |
In Stock (Only 4 left) | ||
1223 | EXHAUST TUBE | $34.19 |
Out of Stock | ||
1225 | TIMING PLATE | $21.85 |
In Stock (Only 2 left) | ||
1227 | TIMING GEAR | $9.14 |
In Stock (Only 2 left) | ||
1228S | TIMING SECTOR SET | $24.66 |
In Stock (Only 2 left) | ||
1232 | COVER GASKET | $4.61 |
In Stock (Only 5 left) | ||
1233 | HANDLE HOUSING | $73.84 |
In Stock (Only 1 left) | ||
1234S | HANDLE HOUSING SCREWS (SET OF 4) | $9.94 |
Out of Stock | ||
1235S | SIDE RAILS (SET OF 2) | $25.17 |
In Stock (Only 1 left) | ||
1236S | RAIL SCREWS (SET OF 12) | $15.46 |
In Stock (Only 3 left) | ||
1238 | TIMING PLATE SCREWS (SET OF 2) | $6.76 |
In Stock | ||
1240 | VALVE PLATE BUSHING | $6.48 |
In Stock (Only 9 left) | ||
1241S | COUNTERWEIGHT GUIDE SET (2 PC) | $18.03 |
In Stock (Only 2 left) | ||
1242 | COUNTERWEIGHT BAR | $61.38 |
In Stock (Only 5 left) | ||
1243S | SCREWS (SET OF 2) | $5.85 |
Out of Stock | ||
1244 | TIMING STUD | $5.81 |
Out of Stock | ||
1246 | WARE PLATE | $26.84 |
Out of Stock | ||
1252 | TIMING SHAFT ROLL PIN | $3.53 |
In Stock (Only 1 left) | ||
1257 | SL PAD ATTACHING SCREW SET | $4.64 |
Out of Stock | ||
1257C | CENTER PAD SCREW ONLY | $2.46 |
Out of Stock | ||
1829 | TRIGGER | $6.73 |
Out of Stock | ||
1830S | BUTTON HEAD CAP SCREWS (SET OF 2) | $2.52 |
In Stock (Only 3 left) | ||
1832 | AIR VALVE | $8.49 |
Out of Stock | ||
1833 | THROTTLE SPRING | $4.64 |
In Stock (Only 2 left) | ||
1838-1 | STEEL HANDLE | $12.86 |
Out of Stock | ||
1840 | RED HANDLE GRIP | $6.13 |
In Stock (Only 2 left) | ||
1841-1 | INLET FITTING | $5.46 |
Out of Stock | ||
1906S | CLAMP SET (2) w/SCREWS (4) | $27.45 |
Out of Stock | ||
1935 | HOLD DOWN CLAMP | $3.28 |
In Stock (Only 1 left) | ||
1934S | SCREWS (SET OF 2) | $1.57 |
Out of Stock | ||
1937 | AIR CONTROL VALVE | $9.66 |
Out of Stock | ||
5003 | STANDARD STRAIGHT-LINE PAD (HUT2000 CLIP IT) | $54.48 |
Out of Stock | ||
5301-1 | VA CONNECTOR | $22.09 |
Out of Stock | ||
Details
Model #2000
BrandHutchins
Tool TypeStraight Line Sander
Powered ByAir
Weight7 lbs. / 3.18 kg
We Service? Yes Submit Order
Accessories
No accessories found for this tool model.
Warranty & Documentation
Warranty
Warranty Duration: 1 Year