Matco Tools MT2883L
Matco Tools MT2883L
This tool is unavailable for purchase, but replacement parts may be available below.
Air Die Grinders/Grinders
Replacement Parts
Details
Accessories
Warranty & Documentation
| Ref # | Part | Price |
|---|---|---|
1 | REGULATOR | $4.00 |
Out of Stock | ||
2 | RUBBER O-RING | $4.00 |
Out of Stock | ||
3 | RUBBER O-RING | $4.00 |
Out of Stock | ||
4 | EXTERNAL SNAP RING | $4.00 |
In Stock (Only 2 left) | ||
6 | THROTTLE STEM w/O-RING | $4.00 |
In Stock (Only 5 left) | ||
7 | INLET BUSHING | $5.20 |
Out of Stock | ||
8 | EXHAUST SLEEVE | $4.00 |
In Stock (Only 2 left) | ||
9 | MUFFLER COTTON | $4.00 |
In Stock (Only 2 left) | ||
10 | RUBBER O-RING | $4.00 |
Out of Stock | ||
11 | PROTECTING RUBBER (GRIP) | $25.20 |
In Stock (Only 2 left) | ||
12 | SPRING ROLL PIN | $4.00 |
Out of Stock | ||
13 | LEVER | $10.03 |
In Stock (Only 7 left) | ||
14 | THROTTLE SPRING | $4.00 |
Out of Stock | ||
15 | THROTTLE VALVE | $4.00 |
Out of Stock | ||
16 | THROTTLE SEAT | $4.00 |
In Stock | ||
17 | HOUSING FOR GRINDER | $14.34 |
Out of Stock | ||
18 | BALL BEARING | $6.94 |
Out of Stock | ||
19 | REAR END PLATE | $6.46 |
In Stock (Only 1 left) | ||
20 | ROTOR BLADE (SINGLE) | $4.00 |
Out of Stock | ||
21 | ROTOR | $15.66 |
In Stock (Only 2 left) | ||
22 | CYLINDER | $19.60 |
In Stock (Only 1 left) | ||
23 | LINE-UP PIN | $4.00 |
In Stock (Only 3 left) | ||
24 | BEARING SPACER FOR GRINDER | $4.00 |
Out of Stock | ||
25 | FRONT END PLATE | $7.80 |
Out of Stock | ||
26 | BALL BEARING | $6.34 |
Out of Stock | ||
28 | NUT - FOR GRINDER | $4.00 |
In Stock (Only 2 left) | ||
29 | COUPLING NUT | $5.20 |
In Stock (Only 1 left) | ||
30 | COUPLING | $4.00 |
Out of Stock | ||
31 | BALL BEARING (699ZZ) | $9.86 |
Out of Stock | ||
32 | CLAMP NUT | $10.46 |
Out of Stock | ||
33 | SPINDLE HOUSING FOR GRINDER | $14.34 |
Out of Stock | ||
34 | SPINDLE SHAFT | $14.34 |
Out of Stock | ||
35 | BALL BEARING (609ZZ) | $9.46 |
Out of Stock | ||
36 | PINION GEAR | $14.34 |
In Stock (Only 3 left) | ||
37 | ANGLE HOUSING | $19.60 |
Out of Stock | ||
38 | GREASE FITTING | $4.00 |
In Stock (Only 7 left) | ||
39 | WICK {ABSORPTION COTTON} | |
40 | SNAP RING FOR GRINDER | $4.00 |
Out of Stock | ||
41 | BEVEL GEAR | $14.34 |
In Stock (Only 1 left) | ||
42 | BALL BEARING (6000ZZ) | $15.46 |
Out of Stock | ||
43 | WASHER | $4.00 |
Out of Stock | ||
44 | WASHER | $4.40 |
In Stock (Only 2 left) | ||
45 | SPINDLE | $11.74 |
Out of Stock | ||
46 | SPINDLE KEY | $4.00 |
In Stock (Only 6 left) | ||
47 | CLAMP NUT/ANGLE HOUSING NUT FOR GRINDER | $5.20 |
In Stock (Only 1 left) | ||
48 | 1/4" COLLET | $7.40 |
Out of Stock | ||
48-A | 1/8" COLLET | $6.54 |
Out of Stock | ||
49 | COLLET NUT | $6.20 |
In Stock (Only 6 left) | ||
50 | STOP SPANNER (19 mm) | $7.00 |
Out of Stock | ||
51 | STOP SPANNER (14 mm) | $7.60 |
Out of Stock | ||
Model #MT2883L
BrandMatco Tools
Tool TypeRight Angle Die Grinder
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes Submit Order
Ingersoll-Rand IR03A-MEDPD
3" MEDIUM ROLOC 1/4" MANDREL
$15.00
In Stock (Only 2 left)
Ingersoll-Rand IR02A-MEDPD
2" MEDIUM ROLOC 1/4" MANDREL
$14.00
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-MEDBR
2" SURFACE PREP MEDIUM - DISC
$2.50
In Stock
Ingersoll-Rand IR02A-CRSBS-4
2" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$38.40
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-CRSB
2" COARSE QUICK-STRIP KIT - 3 DISCS W/BACKING PAD & POST
$26.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-240AO-25
3" AO SERIES SANDING DISC - 240 GRIT
$34.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-MEDBR-25
3" MEDIUM ROLL LOC BROWN
$68.10
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR015A-240AO
1.5" AO SERIES SANDING DISC - 240 GRIT
$1.68
In Stock
Ingersoll-Rand IR03A-CRSBS-4
3" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$43.00
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-120AO
2" AO SERIES SANDING DISC - 120 GRIT
$1.68
In Stock
Warranty
Warranty Duration: 1 Year
Documentation
Replacement Parts
| Ref # | Part | Price |
|---|---|---|
1 | REGULATOR | $4.00 |
Out of Stock | ||
2 | RUBBER O-RING | $4.00 |
Out of Stock | ||
3 | RUBBER O-RING | $4.00 |
Out of Stock | ||
4 | EXTERNAL SNAP RING | $4.00 |
In Stock (Only 2 left) | ||
6 | THROTTLE STEM w/O-RING | $4.00 |
In Stock (Only 5 left) | ||
7 | INLET BUSHING | $5.20 |
Out of Stock | ||
8 | EXHAUST SLEEVE | $4.00 |
In Stock (Only 2 left) | ||
9 | MUFFLER COTTON | $4.00 |
In Stock (Only 2 left) | ||
10 | RUBBER O-RING | $4.00 |
Out of Stock | ||
11 | PROTECTING RUBBER (GRIP) | $25.20 |
In Stock (Only 2 left) | ||
12 | SPRING ROLL PIN | $4.00 |
Out of Stock | ||
13 | LEVER | $10.03 |
In Stock (Only 7 left) | ||
14 | THROTTLE SPRING | $4.00 |
Out of Stock | ||
15 | THROTTLE VALVE | $4.00 |
Out of Stock | ||
16 | THROTTLE SEAT | $4.00 |
In Stock | ||
17 | HOUSING FOR GRINDER | $14.34 |
Out of Stock | ||
18 | BALL BEARING | $6.94 |
Out of Stock | ||
19 | REAR END PLATE | $6.46 |
In Stock (Only 1 left) | ||
20 | ROTOR BLADE (SINGLE) | $4.00 |
Out of Stock | ||
21 | ROTOR | $15.66 |
In Stock (Only 2 left) | ||
22 | CYLINDER | $19.60 |
In Stock (Only 1 left) | ||
23 | LINE-UP PIN | $4.00 |
In Stock (Only 3 left) | ||
24 | BEARING SPACER FOR GRINDER | $4.00 |
Out of Stock | ||
25 | FRONT END PLATE | $7.80 |
Out of Stock | ||
26 | BALL BEARING | $6.34 |
Out of Stock | ||
28 | NUT - FOR GRINDER | $4.00 |
In Stock (Only 2 left) | ||
29 | COUPLING NUT | $5.20 |
In Stock (Only 1 left) | ||
30 | COUPLING | $4.00 |
Out of Stock | ||
31 | BALL BEARING (699ZZ) | $9.86 |
Out of Stock | ||
32 | CLAMP NUT | $10.46 |
Out of Stock | ||
33 | SPINDLE HOUSING FOR GRINDER | $14.34 |
Out of Stock | ||
34 | SPINDLE SHAFT | $14.34 |
Out of Stock | ||
35 | BALL BEARING (609ZZ) | $9.46 |
Out of Stock | ||
36 | PINION GEAR | $14.34 |
In Stock (Only 3 left) | ||
37 | ANGLE HOUSING | $19.60 |
Out of Stock | ||
38 | GREASE FITTING | $4.00 |
In Stock (Only 7 left) | ||
39 | WICK {ABSORPTION COTTON} | |
40 | SNAP RING FOR GRINDER | $4.00 |
Out of Stock | ||
41 | BEVEL GEAR | $14.34 |
In Stock (Only 1 left) | ||
42 | BALL BEARING (6000ZZ) | $15.46 |
Out of Stock | ||
43 | WASHER | $4.00 |
Out of Stock | ||
44 | WASHER | $4.40 |
In Stock (Only 2 left) | ||
45 | SPINDLE | $11.74 |
Out of Stock | ||
46 | SPINDLE KEY | $4.00 |
In Stock (Only 6 left) | ||
47 | CLAMP NUT/ANGLE HOUSING NUT FOR GRINDER | $5.20 |
In Stock (Only 1 left) | ||
48 | 1/4" COLLET | $7.40 |
Out of Stock | ||
48-A | 1/8" COLLET | $6.54 |
Out of Stock | ||
49 | COLLET NUT | $6.20 |
In Stock (Only 6 left) | ||
50 | STOP SPANNER (19 mm) | $7.00 |
Out of Stock | ||
51 | STOP SPANNER (14 mm) | $7.60 |
Out of Stock | ||
Details
Model #MT2883L
BrandMatco Tools
Tool TypeRight Angle Die Grinder
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes Submit Order
Accessories
Ingersoll-Rand IR03A-MEDPD
3" MEDIUM ROLOC 1/4" MANDREL
$15.00
In Stock (Only 2 left)
Ingersoll-Rand IR02A-MEDPD
2" MEDIUM ROLOC 1/4" MANDREL
$14.00
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-MEDBR
2" SURFACE PREP MEDIUM - DISC
$2.50
In Stock
Ingersoll-Rand IR02A-CRSBS-4
2" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$38.40
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-CRSB
2" COARSE QUICK-STRIP KIT - 3 DISCS W/BACKING PAD & POST
$26.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-240AO-25
3" AO SERIES SANDING DISC - 240 GRIT
$34.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-MEDBR-25
3" MEDIUM ROLL LOC BROWN
$68.10
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR015A-240AO
1.5" AO SERIES SANDING DISC - 240 GRIT
$1.68
In Stock
Ingersoll-Rand IR03A-CRSBS-4
3" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$43.00
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-120AO
2" AO SERIES SANDING DISC - 120 GRIT
$1.68
In Stock
Warranty & Documentation
Warranty
Warranty Duration: 1 Year