Matco Tools MT2887
Matco Tools MT2887
This tool is unavailable for purchase, but replacement parts may be available below.
Right Angle Air Die Grinder
Replacement Parts
Details
Accessories
Warranty & Documentation
| Ref # | Part | Price |
|---|---|---|
1 | REGULATOR | $4.00 |
Out of Stock | ||
2 | RUBBER O-RING | $4.00 |
Out of Stock | ||
3 | RUBBER O-RING | $4.00 |
Out of Stock | ||
4 | EXTERNAL SNAP RING | $4.00 |
In Stock (Only 2 left) | ||
6 | THROTTLE STEM w/O-RING | $4.00 |
In Stock (Only 7 left) | ||
7 | INLET BUSHING | $5.20 |
In Stock (Only 2 left) | ||
8 | EXHAUST SLEEVE | $4.00 |
Out of Stock | ||
9 | MUFFLER COTTON | $4.00 |
In Stock (Only 2 left) | ||
10 | RUBBER O-RING | $4.00 |
In Stock (Only 1 left) | ||
11 | PROTECT RUBBER FOR MT2883 | $15.40 |
In Stock (Only 1 left) | ||
12 | SPRING ROLL PIN | $4.00 |
In Stock (Only 2 left) | ||
13 | LEVER | $10.03 |
In Stock (Only 5 left) | ||
14 | THROTTLE SPRING | $4.00 |
In Stock (Only 1 left) | ||
15 | THROTTLE VALVE | $4.00 |
Out of Stock | ||
16 | THROTTLE SEAT | $4.00 |
Out of Stock | ||
17 | HOUSING FOR GRINDER | $14.34 |
Out of Stock | ||
18 | BALL BEARING | $6.94 |
In Stock (Only 1 left) | ||
19 | REAR END PLATE | $6.46 |
In Stock (Only 2 left) | ||
20 | ROTOR BLADE (SINGLE) | $4.00 |
Out of Stock | ||
21 | ROTOR | $15.66 |
In Stock (Only 2 left) | ||
22 | CYLINDER | $19.60 |
In Stock (Only 2 left) | ||
23 | LINE-UP PIN | $4.00 |
In Stock (Only 3 left) | ||
24 | ROTOR SPACER | $4.00 |
In Stock (Only 2 left) | ||
25 | FRONT END PLATE | $7.80 |
In Stock (Only 2 left) | ||
26 | BALL BEARING | $6.34 |
Out of Stock | ||
27 | GEAR | $14.34 |
In Stock (Only 1 left) | ||
28 | NUT - FOR GRINDER | $4.00 |
In Stock (Only 2 left) | ||
29 | CLAMP NUT | $7.80 |
In Stock (Only 2 left) | ||
30 | ANGLE HOUSING {INCL. #31} (28837) | $15.66 |
Out of Stock | ||
31 | GREASE FITTING | $4.00 |
In Stock (Only 5 left) | ||
32 | SNAP RING | $4.00 |
Out of Stock | ||
33 | GEAR | $14.34 |
In Stock (Only 8 left) | ||
34 | BALL BEARING | $9.46 |
Out of Stock | ||
35 | WASHER FOR ANGLE GRIND. | $4.00 |
Out of Stock | ||
36 | SHAFT FOR ANGLE GRINDER | $10.46 |
Out of Stock | ||
37 | SPINDLE KEY | $4.00 |
In Stock | ||
38 | CLAMP NUT/ANGLE GRINDER | $4.40 |
Out of Stock | ||
39 | 1/4" COLLET | $7.40 |
Out of Stock | ||
39-A | 1/8" COLLET | $6.54 |
Out of Stock | ||
40 | COLLET NUT | $6.20 |
In Stock (Only 7 left) | ||
41 | STOP SPANNER (19 mm) | $7.00 |
In Stock (Only 2 left) | ||
42 | STOP SPANNER (14 mm) | $7.60 |
In Stock (Only 1 left) | ||
Model #MT2887
BrandMatco Tools
Tool TypeRight Angle Die Grinder
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes
Ingersoll-Rand IR03A-MEDPD
3" MEDIUM ROLOC 1/4" MANDREL
$13.70
In Stock (Only 3 left)
Ingersoll-Rand IR02A-MEDPD
2" MEDIUM ROLOC 1/4" MANDREL
$12.80
In Stock (Only 3 left)
Ingersoll-Rand IR02A-MEDBR
2" SURFACE PREP MEDIUM - DISC
$2.40
In Stock
Ingersoll-Rand IR02A-CRSBS-4
2" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$38.40
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-CRSB
2" COARSE QUICK-STRIP KIT - 3 DISCS W/BACKING PAD & POST
$26.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-240AO-25
3" AO SERIES SANDING DISC - 240 GRIT
$34.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-MEDBR-25
3" MEDIUM ROLL LOC BROWN
$68.10
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR015A-240AO
1.5" AO SERIES SANDING DISC - 240 GRIT
$1.68
In Stock
Ingersoll-Rand IR03A-CRSBS-4
3" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$43.00
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-120AO
2" AO SERIES SANDING DISC - 120 GRIT
$1.68
In Stock
Warranty
Warranty Duration: 1 Year
Documentation
Replacement Parts
| Ref # | Part | Price |
|---|---|---|
1 | REGULATOR | $4.00 |
Out of Stock | ||
2 | RUBBER O-RING | $4.00 |
Out of Stock | ||
3 | RUBBER O-RING | $4.00 |
Out of Stock | ||
4 | EXTERNAL SNAP RING | $4.00 |
In Stock (Only 2 left) | ||
6 | THROTTLE STEM w/O-RING | $4.00 |
In Stock (Only 7 left) | ||
7 | INLET BUSHING | $5.20 |
In Stock (Only 2 left) | ||
8 | EXHAUST SLEEVE | $4.00 |
Out of Stock | ||
9 | MUFFLER COTTON | $4.00 |
In Stock (Only 2 left) | ||
10 | RUBBER O-RING | $4.00 |
In Stock (Only 1 left) | ||
11 | PROTECT RUBBER FOR MT2883 | $15.40 |
In Stock (Only 1 left) | ||
12 | SPRING ROLL PIN | $4.00 |
In Stock (Only 2 left) | ||
13 | LEVER | $10.03 |
In Stock (Only 5 left) | ||
14 | THROTTLE SPRING | $4.00 |
In Stock (Only 1 left) | ||
15 | THROTTLE VALVE | $4.00 |
Out of Stock | ||
16 | THROTTLE SEAT | $4.00 |
Out of Stock | ||
17 | HOUSING FOR GRINDER | $14.34 |
Out of Stock | ||
18 | BALL BEARING | $6.94 |
In Stock (Only 1 left) | ||
19 | REAR END PLATE | $6.46 |
In Stock (Only 2 left) | ||
20 | ROTOR BLADE (SINGLE) | $4.00 |
Out of Stock | ||
21 | ROTOR | $15.66 |
In Stock (Only 2 left) | ||
22 | CYLINDER | $19.60 |
In Stock (Only 2 left) | ||
23 | LINE-UP PIN | $4.00 |
In Stock (Only 3 left) | ||
24 | ROTOR SPACER | $4.00 |
In Stock (Only 2 left) | ||
25 | FRONT END PLATE | $7.80 |
In Stock (Only 2 left) | ||
26 | BALL BEARING | $6.34 |
Out of Stock | ||
27 | GEAR | $14.34 |
In Stock (Only 1 left) | ||
28 | NUT - FOR GRINDER | $4.00 |
In Stock (Only 2 left) | ||
29 | CLAMP NUT | $7.80 |
In Stock (Only 2 left) | ||
30 | ANGLE HOUSING {INCL. #31} (28837) | $15.66 |
Out of Stock | ||
31 | GREASE FITTING | $4.00 |
In Stock (Only 5 left) | ||
32 | SNAP RING | $4.00 |
Out of Stock | ||
33 | GEAR | $14.34 |
In Stock (Only 8 left) | ||
34 | BALL BEARING | $9.46 |
Out of Stock | ||
35 | WASHER FOR ANGLE GRIND. | $4.00 |
Out of Stock | ||
36 | SHAFT FOR ANGLE GRINDER | $10.46 |
Out of Stock | ||
37 | SPINDLE KEY | $4.00 |
In Stock | ||
38 | CLAMP NUT/ANGLE GRINDER | $4.40 |
Out of Stock | ||
39 | 1/4" COLLET | $7.40 |
Out of Stock | ||
39-A | 1/8" COLLET | $6.54 |
Out of Stock | ||
40 | COLLET NUT | $6.20 |
In Stock (Only 7 left) | ||
41 | STOP SPANNER (19 mm) | $7.00 |
In Stock (Only 2 left) | ||
42 | STOP SPANNER (14 mm) | $7.60 |
In Stock (Only 1 left) | ||
Details
Model #MT2887
BrandMatco Tools
Tool TypeRight Angle Die Grinder
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes
Accessories
Ingersoll-Rand IR03A-MEDPD
3" MEDIUM ROLOC 1/4" MANDREL
$13.70
In Stock (Only 3 left)
Ingersoll-Rand IR02A-MEDPD
2" MEDIUM ROLOC 1/4" MANDREL
$12.80
In Stock (Only 3 left)
Ingersoll-Rand IR02A-MEDBR
2" SURFACE PREP MEDIUM - DISC
$2.40
In Stock
Ingersoll-Rand IR02A-CRSBS-4
2" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$38.40
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-CRSB
2" COARSE QUICK-STRIP KIT - 3 DISCS W/BACKING PAD & POST
$26.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-240AO-25
3" AO SERIES SANDING DISC - 240 GRIT
$34.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-MEDBR-25
3" MEDIUM ROLL LOC BROWN
$68.10
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR015A-240AO
1.5" AO SERIES SANDING DISC - 240 GRIT
$1.68
In Stock
Ingersoll-Rand IR03A-CRSBS-4
3" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$43.00
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-120AO
2" AO SERIES SANDING DISC - 120 GRIT
$1.68
In Stock
Warranty & Documentation
Warranty
Warranty Duration: 1 Year