Matco Tools SE315A
Matco Tools SE315A
This tool is unavailable for purchase, but replacement parts may be available below.
Air Pin Stripe Removal Tool
This product has been discontinued with limited quantity available.
Replacement Parts
Details
Accessories
Warranty & Documentation
| Ref # | Part | Price |
|---|---|---|
1 | SCREW FOR PINSTRIPE REMOVAL TOOL {ANGLE DIE GRINDER} {NIBBLER} | $4.00 |
Out of Stock | ||
2 | O-RING (P12) | $4.00 |
Out of Stock | ||
3 | O-RING (P8) (70003) | $4.00 |
Out of Stock | ||
4 | AIR REGULATOR | $4.00 |
Out of Stock | ||
5 | SPRING | $4.00 |
Out of Stock | ||
6 | VALVE | $4.00 |
Out of Stock | ||
7 | STEM | $4.00 |
In Stock (Only 1 left) | ||
8 | BUNA N70D #7 O-RING | $1.20 |
In Stock | ||
9 | INLET | $4.00 |
Out of Stock | ||
10 | EXHAUST SLEEVE FOR PINSTRIPE REMOVAL TOOL/SANDER | $4.00 |
Out of Stock | ||
11 | O-RING | $4.00 |
Out of Stock | ||
12 | SPRING PIN | $4.00 |
Out of Stock | ||
15 | HOUSING | $14.34 |
Out of Stock | ||
13 | LEVER | $7.80 |
Out of Stock | ||
14 | PROTECTING RUBBER | $26.14 |
Out of Stock | ||
16 | BALL BEARING | $6.94 |
Out of Stock | ||
18 | PIN {PINSTRIPE REMOVAL} {ANGLE DIE GRINDER/NIBBLER} | $4.00 |
Out of Stock | ||
17 | END PLATE FOR ANGLE DIE GRINDER/SANDER | $4.00 |
Out of Stock | ||
19 | ROTOR BLADE (SINGLE) | $4.00 |
Out of Stock | ||
20 | ROTOR | $21.06 |
Out of Stock | ||
22 | MUFFLER FOR ANGLE DIE GRINDER | $5.94 |
Out of Stock | ||
21 | CYLINDER FOR ANGLE DIE GRINDER | $6.46 |
Out of Stock | ||
23 | FRONT END PLATE | $4.00 |
Out of Stock | ||
24 | BALL BEARING | $6.34 |
Out of Stock | ||
25 | WASHER/PINSTRIPE REMOVAL | $4.00 |
Out of Stock | ||
26 | GEAR | $6.46 |
Out of Stock | ||
27 | GEAR | $4.00 |
Out of Stock | ||
28 | PIN | $4.00 |
Out of Stock | ||
29 | BEARING RUBBER SEAL | $25.12 |
Out of Stock | ||
30 | GEAR PLATE | $16.94 |
In Stock (Only 1 left) | ||
31 | BEARING | $11.02 |
Out of Stock | ||
32 | CLAMP NUT | $12.46 |
Out of Stock | ||
33 | WASHER | $4.00 |
Out of Stock | ||
34 | SHAFT | $6.46 |
Out of Stock | ||
36 | HANDLE LINK | $12.80 |
Out of Stock | ||
37 | MALE END ADAPTER {FOR 3M PAD} | $4.40 |
Out of Stock | ||
38 | SPANNER WRENCH (14 mm) | $4.00 |
Out of Stock | ||
39 | HEX WRENCH (4 mm) | $4.00 |
Out of Stock | ||
40 | SCREW FOR PINSTRIPE REMOVAL TOOL | $4.00 |
Out of Stock | ||
43 | HOLDER/WASHER SET | $8.80 |
Out of Stock | ||
Model #SE315A
BrandMatco Tools
Tool TypePinstripe Remover
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes
No accessories found for this tool model.
Replacement Parts
| Ref # | Part | Price |
|---|---|---|
1 | SCREW FOR PINSTRIPE REMOVAL TOOL {ANGLE DIE GRINDER} {NIBBLER} | $4.00 |
Out of Stock | ||
2 | O-RING (P12) | $4.00 |
Out of Stock | ||
3 | O-RING (P8) (70003) | $4.00 |
Out of Stock | ||
4 | AIR REGULATOR | $4.00 |
Out of Stock | ||
5 | SPRING | $4.00 |
Out of Stock | ||
6 | VALVE | $4.00 |
Out of Stock | ||
7 | STEM | $4.00 |
In Stock (Only 1 left) | ||
8 | BUNA N70D #7 O-RING | $1.20 |
In Stock | ||
9 | INLET | $4.00 |
Out of Stock | ||
10 | EXHAUST SLEEVE FOR PINSTRIPE REMOVAL TOOL/SANDER | $4.00 |
Out of Stock | ||
11 | O-RING | $4.00 |
Out of Stock | ||
12 | SPRING PIN | $4.00 |
Out of Stock | ||
15 | HOUSING | $14.34 |
Out of Stock | ||
13 | LEVER | $7.80 |
Out of Stock | ||
14 | PROTECTING RUBBER | $26.14 |
Out of Stock | ||
16 | BALL BEARING | $6.94 |
Out of Stock | ||
18 | PIN {PINSTRIPE REMOVAL} {ANGLE DIE GRINDER/NIBBLER} | $4.00 |
Out of Stock | ||
17 | END PLATE FOR ANGLE DIE GRINDER/SANDER | $4.00 |
Out of Stock | ||
19 | ROTOR BLADE (SINGLE) | $4.00 |
Out of Stock | ||
20 | ROTOR | $21.06 |
Out of Stock | ||
22 | MUFFLER FOR ANGLE DIE GRINDER | $5.94 |
Out of Stock | ||
21 | CYLINDER FOR ANGLE DIE GRINDER | $6.46 |
Out of Stock | ||
23 | FRONT END PLATE | $4.00 |
Out of Stock | ||
24 | BALL BEARING | $6.34 |
Out of Stock | ||
25 | WASHER/PINSTRIPE REMOVAL | $4.00 |
Out of Stock | ||
26 | GEAR | $6.46 |
Out of Stock | ||
27 | GEAR | $4.00 |
Out of Stock | ||
28 | PIN | $4.00 |
Out of Stock | ||
29 | BEARING RUBBER SEAL | $25.12 |
Out of Stock | ||
30 | GEAR PLATE | $16.94 |
In Stock (Only 1 left) | ||
31 | BEARING | $11.02 |
Out of Stock | ||
32 | CLAMP NUT | $12.46 |
Out of Stock | ||
33 | WASHER | $4.00 |
Out of Stock | ||
34 | SHAFT | $6.46 |
Out of Stock | ||
36 | HANDLE LINK | $12.80 |
Out of Stock | ||
37 | MALE END ADAPTER {FOR 3M PAD} | $4.40 |
Out of Stock | ||
38 | SPANNER WRENCH (14 mm) | $4.00 |
Out of Stock | ||
39 | HEX WRENCH (4 mm) | $4.00 |
Out of Stock | ||
40 | SCREW FOR PINSTRIPE REMOVAL TOOL | $4.00 |
Out of Stock | ||
43 | HOLDER/WASHER SET | $8.80 |
Out of Stock | ||
Details
Model #SE315A
BrandMatco Tools
Tool TypePinstripe Remover
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes
Accessories
No accessories found for this tool model.