Matco Tools SE350
Matco Tools SE350
This tool is unavailable for purchase, but replacement parts may be available below.
Right Angle Air Die Grinder
Replacement Parts
Details
Accessories
Warranty & Documentation
| Ref # | Part | Price |
|---|---|---|
1 | MOTOR HOUSING w/BUSHING FOR SE350 | $30.88 |
Out of Stock | ||
2 | CYLINDER FOR DIE GRINDER | $10.08 |
Out of Stock | ||
3 | ROTOR FOR DIE GRINDER | $13.80 |
Out of Stock | ||
4 | ROTOR BLADE (SINGLE) | $4.00 |
In Stock (Only 2 left) | ||
5 | SILENCER FOR DIE GRINDER | $6.00 |
Out of Stock | ||
6 | WASHER FOR DIE GRINDER | $4.00 |
Out of Stock | ||
7 | O-RING FOR DIE GRINDER | $4.00 |
Out of Stock | ||
8 | DEFLECTOR | $4.00 |
Out of Stock | ||
9 | INLET FOR DIE GRINDER | $4.00 |
Out of Stock | ||
10 | LEVER PIN FOR DIE GRINDER | $4.00 |
Out of Stock | ||
11 | THROTTLE LEVER FOR DIE GRINDER | $4.00 |
Out of Stock | ||
12 | SPRING PIN FOR DIE GRINDER | $4.00 |
Out of Stock | ||
13 | SPRING FOR DIE GRINDER | $4.00 |
Out of Stock | ||
14 | STOP ROD FOR DIE GRINDER | $4.00 |
Out of Stock | ||
15 | BUSHING | $1.86 |
Out of Stock | ||
16 | VALVE STEM | $4.00 |
Out of Stock | ||
17 | O-RING FOR DIE GRINDER | $4.00 |
Out of Stock | ||
18 | O-RING FOR DIE GRINDER #7 | $4.00 |
Out of Stock | ||
19 | SPRING | $4.00 |
Out of Stock | ||
20 | REGULATOR FOR DIE GRINDER | $4.00 |
Out of Stock | ||
21 | O-RING FOR DIE GRINDER #10 | $4.00 |
Out of Stock | ||
22 | O-RING FOR DIE GRINDER #12 | $4.00 |
Out of Stock | ||
23 | VALVE SCREW FOR DIE GRINDER | $4.00 |
Out of Stock | ||
24 | BALL BEARING | $6.94 |
Out of Stock | ||
25 | REAR END PLATE | $7.04 |
Out of Stock | ||
26 | FRONT END PLATE | $7.04 |
Out of Stock | ||
27 | BALL BEARING | $6.34 |
Out of Stock | ||
28 | ROTOR SPACER | $4.00 |
Out of Stock | ||
29 | 1/4" COLLET | $11.12 |
Out of Stock | ||
30 | COLLET NUT | $5.60 |
Out of Stock | ||
31 | SPANNER WRENCH (11 mm) DIE GRINDER | $4.00 |
Out of Stock | ||
32 | SPANNER WRENCH (17 mm) DIE GRINDER | $4.14 |
Out of Stock | ||
33 | PIN - End Plate | $4.00 |
Out of Stock | ||
34 | FILTER | $4.00 |
Out of Stock | ||
35 | SPINDLE | $17.16 |
Out of Stock | ||
36 | CLAMP NUT FOR DIE GRINDER | $4.00 |
Out of Stock | ||
37 | GEAR | $19.16 |
Out of Stock | ||
38 | KEY | $4.00 |
Out of Stock | ||
39 | ANGLE HOUSING | $17.82 |
Out of Stock | ||
40 | GEAR | $18.16 |
Out of Stock | ||
41 | HOUSING LOCK RING FOR DIE GRINDER | $5.94 |
Out of Stock | ||
42 | GREASE FITTING | $4.00 |
Out of Stock | ||
43 | O-RING | $4.00 |
Out of Stock | ||
Model #SE350
BrandMatco Tools
Tool TypeRight Angle Die Grinder
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes Submit Order
Ingersoll-Rand IR03A-MEDPD
3" MEDIUM ROLOC 1/4" MANDREL
$15.00
In Stock (Only 1 left)
Ingersoll-Rand IR02A-MEDPD
2" MEDIUM ROLOC 1/4" MANDREL
$14.00
In Stock (Only 2 left)
Ingersoll-Rand IR02A-MEDBR
2" SURFACE PREP MEDIUM - DISC
$2.50
In Stock
Ingersoll-Rand IR02A-CRSBS-4
2" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$38.40
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-CRSB
2" COARSE QUICK-STRIP KIT - 3 DISCS W/BACKING PAD & POST
$26.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-240AO-25
3" AO SERIES SANDING DISC - 240 GRIT
$34.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-MEDBR-25
3" MEDIUM ROLL LOC BROWN
$68.10
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR015A-240AO
1.5" AO SERIES SANDING DISC - 240 GRIT
$1.68
In Stock
Ingersoll-Rand IR03A-CRSBS-4
3" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$43.00
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-120AO
2" AO SERIES SANDING DISC - 120 GRIT
$1.68
In Stock
Replacement Parts
| Ref # | Part | Price |
|---|---|---|
1 | MOTOR HOUSING w/BUSHING FOR SE350 | $30.88 |
Out of Stock | ||
2 | CYLINDER FOR DIE GRINDER | $10.08 |
Out of Stock | ||
3 | ROTOR FOR DIE GRINDER | $13.80 |
Out of Stock | ||
4 | ROTOR BLADE (SINGLE) | $4.00 |
In Stock (Only 2 left) | ||
5 | SILENCER FOR DIE GRINDER | $6.00 |
Out of Stock | ||
6 | WASHER FOR DIE GRINDER | $4.00 |
Out of Stock | ||
7 | O-RING FOR DIE GRINDER | $4.00 |
Out of Stock | ||
8 | DEFLECTOR | $4.00 |
Out of Stock | ||
9 | INLET FOR DIE GRINDER | $4.00 |
Out of Stock | ||
10 | LEVER PIN FOR DIE GRINDER | $4.00 |
Out of Stock | ||
11 | THROTTLE LEVER FOR DIE GRINDER | $4.00 |
Out of Stock | ||
12 | SPRING PIN FOR DIE GRINDER | $4.00 |
Out of Stock | ||
13 | SPRING FOR DIE GRINDER | $4.00 |
Out of Stock | ||
14 | STOP ROD FOR DIE GRINDER | $4.00 |
Out of Stock | ||
15 | BUSHING | $1.86 |
Out of Stock | ||
16 | VALVE STEM | $4.00 |
Out of Stock | ||
17 | O-RING FOR DIE GRINDER | $4.00 |
Out of Stock | ||
18 | O-RING FOR DIE GRINDER #7 | $4.00 |
Out of Stock | ||
19 | SPRING | $4.00 |
Out of Stock | ||
20 | REGULATOR FOR DIE GRINDER | $4.00 |
Out of Stock | ||
21 | O-RING FOR DIE GRINDER #10 | $4.00 |
Out of Stock | ||
22 | O-RING FOR DIE GRINDER #12 | $4.00 |
Out of Stock | ||
23 | VALVE SCREW FOR DIE GRINDER | $4.00 |
Out of Stock | ||
24 | BALL BEARING | $6.94 |
Out of Stock | ||
25 | REAR END PLATE | $7.04 |
Out of Stock | ||
26 | FRONT END PLATE | $7.04 |
Out of Stock | ||
27 | BALL BEARING | $6.34 |
Out of Stock | ||
28 | ROTOR SPACER | $4.00 |
Out of Stock | ||
29 | 1/4" COLLET | $11.12 |
Out of Stock | ||
30 | COLLET NUT | $5.60 |
Out of Stock | ||
31 | SPANNER WRENCH (11 mm) DIE GRINDER | $4.00 |
Out of Stock | ||
32 | SPANNER WRENCH (17 mm) DIE GRINDER | $4.14 |
Out of Stock | ||
33 | PIN - End Plate | $4.00 |
Out of Stock | ||
34 | FILTER | $4.00 |
Out of Stock | ||
35 | SPINDLE | $17.16 |
Out of Stock | ||
36 | CLAMP NUT FOR DIE GRINDER | $4.00 |
Out of Stock | ||
37 | GEAR | $19.16 |
Out of Stock | ||
38 | KEY | $4.00 |
Out of Stock | ||
39 | ANGLE HOUSING | $17.82 |
Out of Stock | ||
40 | GEAR | $18.16 |
Out of Stock | ||
41 | HOUSING LOCK RING FOR DIE GRINDER | $5.94 |
Out of Stock | ||
42 | GREASE FITTING | $4.00 |
Out of Stock | ||
43 | O-RING | $4.00 |
Out of Stock | ||
Details
Model #SE350
BrandMatco Tools
Tool TypeRight Angle Die Grinder
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes Submit Order
Accessories
Ingersoll-Rand IR03A-MEDPD
3" MEDIUM ROLOC 1/4" MANDREL
$15.00
In Stock (Only 1 left)
Ingersoll-Rand IR02A-MEDPD
2" MEDIUM ROLOC 1/4" MANDREL
$14.00
In Stock (Only 2 left)
Ingersoll-Rand IR02A-MEDBR
2" SURFACE PREP MEDIUM - DISC
$2.50
In Stock
Ingersoll-Rand IR02A-CRSBS-4
2" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$38.40
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-CRSB
2" COARSE QUICK-STRIP KIT - 3 DISCS W/BACKING PAD & POST
$26.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-240AO-25
3" AO SERIES SANDING DISC - 240 GRIT
$34.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-MEDBR-25
3" MEDIUM ROLL LOC BROWN
$68.10
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR015A-240AO
1.5" AO SERIES SANDING DISC - 240 GRIT
$1.68
In Stock
Ingersoll-Rand IR03A-CRSBS-4
3" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$43.00
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-120AO
2" AO SERIES SANDING DISC - 120 GRIT
$1.68
In Stock