Matco Tools SE425
Matco Tools SE425
This tool is unavailable for purchase, but replacement parts may be available below.
7" Horizontal Air Sander
This product has been discontinued with limited quantity available.
Replacement Parts
Details
Accessories
Warranty & Documentation
| Ref # | Part | Price |
|---|---|---|
1 | AIR INLET FOR SANDER/POLISHER | $8.06 |
Out of Stock | ||
2 | EXHAUST BUSH. FOR SAND./POLISH. | $6.54 |
Out of Stock | ||
3 | MOTOR HOUSING FOR SANDER/POLISHER | $103.24 |
Out of Stock | ||
5 | HANDLE COVER (SANDER/POLISHER) | $4.00 |
Out of Stock | ||
6 | LEVER FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
7 | THROTTLE LEVER PIN F/SAND/POLSHR | $4.00 |
Out of Stock | ||
9 | THROTTLE VALVE BSH/SAND/POLISHER | $4.00 |
Out of Stock | ||
10 | VALVE STEM FOR SAND./POLISHER | $5.00 |
Out of Stock | ||
11 | O-RING FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
12 | SPRING FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
13 | AIR REGULATOR FOR SAND/POLISHER | $4.20 |
Out of Stock | ||
14 | O-RING FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
15 | O-RING FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
16 | VALVE SCREW FOR SAND/POLISHER | $4.00 |
Out of Stock | ||
17 | GASKET FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
18 | BEARING CAP FOR SAND./POLISHER | $4.00 |
Out of Stock | ||
19 | RETAINER RING FOR SAND/POLISHER | $4.00 |
Out of Stock | ||
20 | BEARING | $9.00 |
Out of Stock | ||
21 | REAR END PLATE F/SAND/POLISHER | $9.74 |
Out of Stock | ||
22 | ROTOR BLADE (SINGLE) | $4.00 |
Out of Stock | ||
23 | ROTOR | $27.34 |
Out of Stock | ||
24 | DOWEL PIN FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
25 | CYLINDER FOR SANDER/POLISHER | $34.66 |
Out of Stock | ||
26 | FRONT PLATE | $11.50 |
Out of Stock | ||
27 | CLAMP NUT/SANDER/POLISHER | $10.86 |
Out of Stock | ||
28 | SPACER FOR SANDER/POLISHER | $6.00 |
Out of Stock | ||
29 | BEARING | $20.20 |
Out of Stock | ||
30 | GEAR | $81.54 |
Out of Stock | ||
32 | CAP SCREW FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
33 | HANDLE | $8.80 |
Out of Stock | ||
34 | ANGLE HOUSING FOR 7" SANDER/POLISHER | $43.00 |
Out of Stock | ||
35 | NEEDLE BEARING/SANDER/POLISHER | $21.38 |
Out of Stock | ||
36 | RETAINER RING/SANDER/POLISHER | $4.00 |
Out of Stock | ||
37 | WAVE WASHER/7" SANDER/POLISHER | $4.00 |
Out of Stock | ||
38 | GEAR | $100.40 |
Out of Stock | ||
39 | BEARING BUSH./7" SANDER/POLISHER | $20.92 |
Out of Stock | ||
40 | BEARING | $14.86 |
Out of Stock | ||
41 | WOODRUFF KEY/SANDER/POLISHER | $4.00 |
Out of Stock | ||
42 | GEAR SHAFT/7" SANDER/POLISHER | $17.78 |
Out of Stock | ||
43 | GASKET/7" SANDER/POLISHER | $4.00 |
Out of Stock | ||
44 | ANGLE HOUSING/7" SANDER/POLISHER | $4.74 |
Out of Stock | ||
45 | SCREW w/LK WSHR/SANDER/POLISHER | $4.00 |
Out of Stock | ||
46 | PAD | $9.80 |
Out of Stock | ||
47 | RET. NUT FOR 7" SANDER/POLISHER | $9.40 |
Out of Stock | ||
48 | O-RING FOR 7" SANDER/POLISHER | $4.00 |
Out of Stock | ||
49 | STOP SPANNER F/7" | $7.54 |
Out of Stock | ||
50 | RUBBER FOR 7" SANDER/POLISHER | $4.00 |
Out of Stock | ||
51 | BEARING PLATE FOR 7" SANDER/POLISHER | $4.00 |
Out of Stock | ||
Model #SE425
BrandMatco Tools
Tool Type7" Angle Sander
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes Submit Order
No accessories found for this tool model.
Replacement Parts
| Ref # | Part | Price |
|---|---|---|
1 | AIR INLET FOR SANDER/POLISHER | $8.06 |
Out of Stock | ||
2 | EXHAUST BUSH. FOR SAND./POLISH. | $6.54 |
Out of Stock | ||
3 | MOTOR HOUSING FOR SANDER/POLISHER | $103.24 |
Out of Stock | ||
5 | HANDLE COVER (SANDER/POLISHER) | $4.00 |
Out of Stock | ||
6 | LEVER FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
7 | THROTTLE LEVER PIN F/SAND/POLSHR | $4.00 |
Out of Stock | ||
9 | THROTTLE VALVE BSH/SAND/POLISHER | $4.00 |
Out of Stock | ||
10 | VALVE STEM FOR SAND./POLISHER | $5.00 |
Out of Stock | ||
11 | O-RING FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
12 | SPRING FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
13 | AIR REGULATOR FOR SAND/POLISHER | $4.20 |
Out of Stock | ||
14 | O-RING FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
15 | O-RING FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
16 | VALVE SCREW FOR SAND/POLISHER | $4.00 |
Out of Stock | ||
17 | GASKET FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
18 | BEARING CAP FOR SAND./POLISHER | $4.00 |
Out of Stock | ||
19 | RETAINER RING FOR SAND/POLISHER | $4.00 |
Out of Stock | ||
20 | BEARING | $9.00 |
Out of Stock | ||
21 | REAR END PLATE F/SAND/POLISHER | $9.74 |
Out of Stock | ||
22 | ROTOR BLADE (SINGLE) | $4.00 |
Out of Stock | ||
23 | ROTOR | $27.34 |
Out of Stock | ||
24 | DOWEL PIN FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
25 | CYLINDER FOR SANDER/POLISHER | $34.66 |
Out of Stock | ||
26 | FRONT PLATE | $11.50 |
Out of Stock | ||
27 | CLAMP NUT/SANDER/POLISHER | $10.86 |
Out of Stock | ||
28 | SPACER FOR SANDER/POLISHER | $6.00 |
Out of Stock | ||
29 | BEARING | $20.20 |
Out of Stock | ||
30 | GEAR | $81.54 |
Out of Stock | ||
32 | CAP SCREW FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
33 | HANDLE | $8.80 |
Out of Stock | ||
34 | ANGLE HOUSING FOR 7" SANDER/POLISHER | $43.00 |
Out of Stock | ||
35 | NEEDLE BEARING/SANDER/POLISHER | $21.38 |
Out of Stock | ||
36 | RETAINER RING/SANDER/POLISHER | $4.00 |
Out of Stock | ||
37 | WAVE WASHER/7" SANDER/POLISHER | $4.00 |
Out of Stock | ||
38 | GEAR | $100.40 |
Out of Stock | ||
39 | BEARING BUSH./7" SANDER/POLISHER | $20.92 |
Out of Stock | ||
40 | BEARING | $14.86 |
Out of Stock | ||
41 | WOODRUFF KEY/SANDER/POLISHER | $4.00 |
Out of Stock | ||
42 | GEAR SHAFT/7" SANDER/POLISHER | $17.78 |
Out of Stock | ||
43 | GASKET/7" SANDER/POLISHER | $4.00 |
Out of Stock | ||
44 | ANGLE HOUSING/7" SANDER/POLISHER | $4.74 |
Out of Stock | ||
45 | SCREW w/LK WSHR/SANDER/POLISHER | $4.00 |
Out of Stock | ||
46 | PAD | $9.80 |
Out of Stock | ||
47 | RET. NUT FOR 7" SANDER/POLISHER | $9.40 |
Out of Stock | ||
48 | O-RING FOR 7" SANDER/POLISHER | $4.00 |
Out of Stock | ||
49 | STOP SPANNER F/7" | $7.54 |
Out of Stock | ||
50 | RUBBER FOR 7" SANDER/POLISHER | $4.00 |
Out of Stock | ||
51 | BEARING PLATE FOR 7" SANDER/POLISHER | $4.00 |
Out of Stock | ||
Details
Model #SE425
BrandMatco Tools
Tool Type7" Angle Sander
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes Submit Order
Accessories
No accessories found for this tool model.