Monster MST702
Monster MST702
This tool is unavailable for purchase, but replacement parts may be available below.
Reversible Right Angle Air Die Grinder
This tool is similar to CAT530.
Replacement Parts
Details
Accessories
Warranty & Documentation
| Ref # | Part | Price |
|---|---|---|
1 | REGULATOR (FORWARD/REVERSE KNOB) | $5.40 |
Out of Stock | ||
2 | RUBBER O-RING | $4.00 |
Out of Stock | ||
3 | RUBBER O-RING | $4.00 |
Out of Stock | ||
4 | VALVE STEM | $4.00 |
Out of Stock | ||
5 | RUBBER O-RING | $4.00 |
Out of Stock | ||
6 | REGULATOR | $4.00 |
Out of Stock | ||
7 | AIR INLET | $4.00 |
Out of Stock | ||
8 | EXHAUST SLEEVE/MUFFLER F/CAT850XLR CUTOFF TOOL/DIE GRINDER | $4.00 |
Out of Stock | ||
10 | PROTECTING RUBBER | $13.80 |
Out of Stock | ||
11 | SOLID ROLL PIN/SPRING PIN/THROTTLE LEVER PIN (3x24L) | $4.00 |
Out of Stock | ||
12 | SAFETY THROTTLE LEVER FOR CUT-OFF TOOL | $6.46 |
In Stock (Only 2 left) | ||
13 | SPRING | $4.00 |
Out of Stock | ||
14 | THROTTLE VALVE | $4.00 |
Out of Stock | ||
15 | THROTTLE SEAT | $4.00 |
In Stock | ||
16 | PIN, 2.85 x 25.7L | $4.00 |
Out of Stock | ||
17 | HOUSING | $15.54 |
Out of Stock | ||
18 | BALL BEARING (626ZZ) | $13.14 |
Out of Stock | ||
19 | GASKET, 17 x 33.2 x 0.8T | $4.00 |
Out of Stock | ||
20 | REAR PLATE | $8.26 |
Out of Stock | ||
22 | ROTOR BLADE (SINGLE) | $4.00 |
Out of Stock | ||
23 | ROTOR | $19.60 |
In Stock (Only 1 left) | ||
24 | CYLINDER | $14.86 |
Out of Stock | ||
25 | ROTOR SPACER/BEARING SPACER | $4.00 |
In Stock (Only 4 left) | ||
26 | LINE-UP PIN | $4.00 |
In Stock (Only 3 left) | ||
27 | FRONT PLATE | $7.00 |
In Stock (Only 1 left) | ||
28 | BALL BEARING (6000ZZ) | $15.46 |
Out of Stock | ||
29 | WASHER/SPACER FOR CUT-OFF TOOL | $4.00 |
Out of Stock | ||
30 | SPINDLE | $13.66 |
In Stock (Only 1 left) | ||
31 | SCREW | $4.00 |
Out of Stock | ||
32 | CLAMP NUT | $16.06 |
Out of Stock | ||
33 | 1/4" COLLET | $7.80 |
Out of Stock | ||
34 | 1/4" COLLET NUT - Straight | $6.20 |
In Stock (Only 9 left) | ||
35 | STOP SPANNER (14 mm) | $4.00 |
Out of Stock | ||
36 | SPANNER WRENCH (19 mm) | $5.74 |
Out of Stock | ||
37 | O-RING (S16) (ST25150) | $4.00 |
Out of Stock | ||
38 | MUFFLER BODY | $4.00 |
Out of Stock | ||
39 | WASHER | $4.00 |
Out of Stock | ||
40 | O-RING | $4.00 |
Out of Stock | ||
41 | O-RING | $4.00 |
Out of Stock | ||
42 | SCREW M4 x 8L | $4.00 |
Out of Stock | ||
43 | SNAP RING (RTW-18) | $4.00 |
Out of Stock | ||
44 | FORWARD/REVERSE VALVE | $4.00 |
In Stock (Only 2 left) | ||
Model #MST702
BrandMonster
Tool TypeRight Angle Die Grinder
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes Submit Order
Ingersoll-Rand IR03A-MEDPD
3" MEDIUM ROLOC 1/4" MANDREL
$15.00
In Stock (Only 5 left)
Ingersoll-Rand IR02A-MEDPD
2" MEDIUM ROLOC 1/4" MANDREL
$14.00
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-MEDBR
2" SURFACE PREP MEDIUM - DISC
$2.50
In Stock
Ingersoll-Rand IR02A-CRSBS-4
2" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$38.40
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-CRSB
2" COARSE QUICK-STRIP KIT - 3 DISCS W/BACKING PAD & POST
$26.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-240AO-25
3" AO SERIES SANDING DISC - 240 GRIT
$34.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-MEDBR-25
3" MEDIUM ROLL LOC BROWN
$68.10
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR015A-240AO
1.5" AO SERIES SANDING DISC - 240 GRIT
$1.68
In Stock
Ingersoll-Rand IR03A-CRSBS-4
3" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$43.00
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-120AO
2" AO SERIES SANDING DISC - 120 GRIT
$1.68
In Stock
Replacement Parts
| Ref # | Part | Price |
|---|---|---|
1 | REGULATOR (FORWARD/REVERSE KNOB) | $5.40 |
Out of Stock | ||
2 | RUBBER O-RING | $4.00 |
Out of Stock | ||
3 | RUBBER O-RING | $4.00 |
Out of Stock | ||
4 | VALVE STEM | $4.00 |
Out of Stock | ||
5 | RUBBER O-RING | $4.00 |
Out of Stock | ||
6 | REGULATOR | $4.00 |
Out of Stock | ||
7 | AIR INLET | $4.00 |
Out of Stock | ||
8 | EXHAUST SLEEVE/MUFFLER F/CAT850XLR CUTOFF TOOL/DIE GRINDER | $4.00 |
Out of Stock | ||
10 | PROTECTING RUBBER | $13.80 |
Out of Stock | ||
11 | SOLID ROLL PIN/SPRING PIN/THROTTLE LEVER PIN (3x24L) | $4.00 |
Out of Stock | ||
12 | SAFETY THROTTLE LEVER FOR CUT-OFF TOOL | $6.46 |
In Stock (Only 2 left) | ||
13 | SPRING | $4.00 |
Out of Stock | ||
14 | THROTTLE VALVE | $4.00 |
Out of Stock | ||
15 | THROTTLE SEAT | $4.00 |
In Stock | ||
16 | PIN, 2.85 x 25.7L | $4.00 |
Out of Stock | ||
17 | HOUSING | $15.54 |
Out of Stock | ||
18 | BALL BEARING (626ZZ) | $13.14 |
Out of Stock | ||
19 | GASKET, 17 x 33.2 x 0.8T | $4.00 |
Out of Stock | ||
20 | REAR PLATE | $8.26 |
Out of Stock | ||
22 | ROTOR BLADE (SINGLE) | $4.00 |
Out of Stock | ||
23 | ROTOR | $19.60 |
In Stock (Only 1 left) | ||
24 | CYLINDER | $14.86 |
Out of Stock | ||
25 | ROTOR SPACER/BEARING SPACER | $4.00 |
In Stock (Only 4 left) | ||
26 | LINE-UP PIN | $4.00 |
In Stock (Only 3 left) | ||
27 | FRONT PLATE | $7.00 |
In Stock (Only 1 left) | ||
28 | BALL BEARING (6000ZZ) | $15.46 |
Out of Stock | ||
29 | WASHER/SPACER FOR CUT-OFF TOOL | $4.00 |
Out of Stock | ||
30 | SPINDLE | $13.66 |
In Stock (Only 1 left) | ||
31 | SCREW | $4.00 |
Out of Stock | ||
32 | CLAMP NUT | $16.06 |
Out of Stock | ||
33 | 1/4" COLLET | $7.80 |
Out of Stock | ||
34 | 1/4" COLLET NUT - Straight | $6.20 |
In Stock (Only 9 left) | ||
35 | STOP SPANNER (14 mm) | $4.00 |
Out of Stock | ||
36 | SPANNER WRENCH (19 mm) | $5.74 |
Out of Stock | ||
37 | O-RING (S16) (ST25150) | $4.00 |
Out of Stock | ||
38 | MUFFLER BODY | $4.00 |
Out of Stock | ||
39 | WASHER | $4.00 |
Out of Stock | ||
40 | O-RING | $4.00 |
Out of Stock | ||
41 | O-RING | $4.00 |
Out of Stock | ||
42 | SCREW M4 x 8L | $4.00 |
Out of Stock | ||
43 | SNAP RING (RTW-18) | $4.00 |
Out of Stock | ||
44 | FORWARD/REVERSE VALVE | $4.00 |
In Stock (Only 2 left) | ||
Details
Model #MST702
BrandMonster
Tool TypeRight Angle Die Grinder
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes Submit Order
Accessories
Ingersoll-Rand IR03A-MEDPD
3" MEDIUM ROLOC 1/4" MANDREL
$15.00
In Stock (Only 5 left)
Ingersoll-Rand IR02A-MEDPD
2" MEDIUM ROLOC 1/4" MANDREL
$14.00
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-MEDBR
2" SURFACE PREP MEDIUM - DISC
$2.50
In Stock
Ingersoll-Rand IR02A-CRSBS-4
2" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$38.40
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-CRSB
2" COARSE QUICK-STRIP KIT - 3 DISCS W/BACKING PAD & POST
$26.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-240AO-25
3" AO SERIES SANDING DISC - 240 GRIT
$34.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-MEDBR-25
3" MEDIUM ROLL LOC BROWN
$68.10
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR015A-240AO
1.5" AO SERIES SANDING DISC - 240 GRIT
$1.68
In Stock
Ingersoll-Rand IR03A-CRSBS-4
3" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$43.00
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-120AO
2" AO SERIES SANDING DISC - 120 GRIT
$1.68
In Stock