NAPA 6-1039
NAPA 6-1039
This tool is unavailable for purchase, but replacement parts may be available below.
Air Paint Removal Tool
This product has been discontinued with limited quantity available.
Replacement Parts
Details
Accessories
Warranty & Documentation
| Ref # | Part | Price |
|---|---|---|
8 | RUBBER O-RING | $4.00 |
Out of Stock | ||
9 | INLET | $4.00 |
In Stock (Only 4 left) | ||
10 | EXHAUST SLEEVE FOR ST20010 | $4.00 |
Out of Stock | ||
11 | RUBBER O-RING | $4.00 |
Out of Stock | ||
12 | CONE MUFFLER | $4.74 |
Out of Stock | ||
13 | PROTECTING RUBBER GRIP | $13.14 |
Out of Stock | ||
14 | HOUSING | $10.06 |
Out of Stock | ||
15 | SPRING PIN | $4.00 |
Out of Stock | ||
16 | LEVER | $5.80 |
Out of Stock | ||
17 | BALL BEARING | $6.94 |
Out of Stock | ||
18 | REAR END PLATE | $6.46 |
In Stock (Only 2 left) | ||
19 | ROTOR BLADE (SINGLE) | $4.00 |
Out of Stock | ||
20 | ROTOR | $24.66 |
Out of Stock | ||
21 | PIN {PINSTRIPE REMOVAL} {ANGLE DIE GRINDER/NIBBLER} | $4.00 |
Out of Stock | ||
22 | CYLINDER FOR ANGLE DIE GRINDER | $6.46 |
Out of Stock | ||
23 | FRONT END PLATE | $4.00 |
In Stock (Only 1 left) | ||
24 | BALL BEARING | $6.34 |
Out of Stock | ||
25 | WASHER/PINSTRIPE REMOVAL | $4.00 |
Out of Stock | ||
26 | BALL BEARING | $25.12 |
Out of Stock | ||
27 | RING GEAR | $13.68 |
Out of Stock | ||
28 | ROLLER GEAR | $5.48 |
In Stock (Only 2 left) | ||
29 | NEEDLE BEARING | $5.50 |
Out of Stock | ||
30 | SOLID ROLL PIN | $4.00 |
In Stock (Only 7 left) | ||
31 | GEAR PLATE | $32.22 |
Out of Stock | ||
32 | GEAR PLATE KEY | $4.00 |
In Stock (Only 8 left) | ||
33 | BEARING | $11.02 |
Out of Stock | ||
34 | CLAMP NUT | $47.14 |
Out of Stock | ||
35 | BEVEL GEAR | $26.74 |
Out of Stock | ||
36 | WASHER | $4.00 |
Out of Stock | ||
37 | BUTTON HEAD CAP SCREW | $4.00 |
Out of Stock | ||
38 | PLASTIC HOUSING KIT (2 PIECES) | $62.06 |
Out of Stock | ||
40 | PULLEY | $37.78 |
Out of Stock | ||
41 | ROTOR KEY | $4.00 |
In Stock (Only 1 left) | ||
42 | BELT DRIVE SHAFT | $14.34 |
Out of Stock | ||
43 | PULLEY BELT | $53.54 |
In Stock (Only 2 left) | ||
44 | BEVEL GEAR | $26.18 |
In Stock (Only 4 left) | ||
46 | BELT DRIVE SHAFT | $12.94 |
Out of Stock | ||
47 | NUT | $19.00 |
Out of Stock | ||
48 | HANDLE RING | $4.00 |
In Stock (Only 2 left) | ||
49 | HANDLE | $7.80 |
Out of Stock | ||
53 | SOCKET HEAD CAP SCREW | $4.00 |
Out of Stock | ||
54 | COVER | $8.68 |
Out of Stock | ||
56 | SCREW | $4.00 |
Out of Stock | ||
58 | HEX WRENCH 3/16" | $4.00 |
Out of Stock | ||
62 | WASHER | $4.00 |
Out of Stock | ||
64 | PIN 3 x 5 | $4.00 |
Out of Stock | ||
65&66 | ERASER/ADAPTER SET | $31.34 |
Out of Stock | ||
70 | REGULATOR | $4.00 |
Out of Stock | ||
71 | RUBBER O-RING | $4.00 |
Out of Stock | ||
72 | RUBBER O-RING | $4.00 |
Out of Stock | ||
73 | EXTERNAL SNAP RING | $4.00 |
In Stock (Only 1 left) | ||
74 | VALVE STEM | $4.00 |
Out of Stock | ||
75 | MUFFLER BODY | $4.00 |
In Stock (Only 1 left) | ||
76 | STAINLESS MESH | $4.00 |
Out of Stock | ||
77 | SILENCER | $4.00 |
Out of Stock | ||
78 | MUFFLER | $4.00 |
Out of Stock | ||
79 | SILENCER | $4.00 |
Out of Stock | ||
80 | SPRING | $4.00 |
Out of Stock | ||
81 | VALVE | $4.00 |
Out of Stock | ||
82 | WASHER | $4.00 |
Out of Stock | ||
Model #6-1039
BrandNAPA
Tool TypePinstripe Remover
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes Submit Order
No accessories found for this tool model.
Replacement Parts
| Ref # | Part | Price |
|---|---|---|
8 | RUBBER O-RING | $4.00 |
Out of Stock | ||
9 | INLET | $4.00 |
In Stock (Only 4 left) | ||
10 | EXHAUST SLEEVE FOR ST20010 | $4.00 |
Out of Stock | ||
11 | RUBBER O-RING | $4.00 |
Out of Stock | ||
12 | CONE MUFFLER | $4.74 |
Out of Stock | ||
13 | PROTECTING RUBBER GRIP | $13.14 |
Out of Stock | ||
14 | HOUSING | $10.06 |
Out of Stock | ||
15 | SPRING PIN | $4.00 |
Out of Stock | ||
16 | LEVER | $5.80 |
Out of Stock | ||
17 | BALL BEARING | $6.94 |
Out of Stock | ||
18 | REAR END PLATE | $6.46 |
In Stock (Only 2 left) | ||
19 | ROTOR BLADE (SINGLE) | $4.00 |
Out of Stock | ||
20 | ROTOR | $24.66 |
Out of Stock | ||
21 | PIN {PINSTRIPE REMOVAL} {ANGLE DIE GRINDER/NIBBLER} | $4.00 |
Out of Stock | ||
22 | CYLINDER FOR ANGLE DIE GRINDER | $6.46 |
Out of Stock | ||
23 | FRONT END PLATE | $4.00 |
In Stock (Only 1 left) | ||
24 | BALL BEARING | $6.34 |
Out of Stock | ||
25 | WASHER/PINSTRIPE REMOVAL | $4.00 |
Out of Stock | ||
26 | BALL BEARING | $25.12 |
Out of Stock | ||
27 | RING GEAR | $13.68 |
Out of Stock | ||
28 | ROLLER GEAR | $5.48 |
In Stock (Only 2 left) | ||
29 | NEEDLE BEARING | $5.50 |
Out of Stock | ||
30 | SOLID ROLL PIN | $4.00 |
In Stock (Only 7 left) | ||
31 | GEAR PLATE | $32.22 |
Out of Stock | ||
32 | GEAR PLATE KEY | $4.00 |
In Stock (Only 8 left) | ||
33 | BEARING | $11.02 |
Out of Stock | ||
34 | CLAMP NUT | $47.14 |
Out of Stock | ||
35 | BEVEL GEAR | $26.74 |
Out of Stock | ||
36 | WASHER | $4.00 |
Out of Stock | ||
37 | BUTTON HEAD CAP SCREW | $4.00 |
Out of Stock | ||
38 | PLASTIC HOUSING KIT (2 PIECES) | $62.06 |
Out of Stock | ||
40 | PULLEY | $37.78 |
Out of Stock | ||
41 | ROTOR KEY | $4.00 |
In Stock (Only 1 left) | ||
42 | BELT DRIVE SHAFT | $14.34 |
Out of Stock | ||
43 | PULLEY BELT | $53.54 |
In Stock (Only 2 left) | ||
44 | BEVEL GEAR | $26.18 |
In Stock (Only 4 left) | ||
46 | BELT DRIVE SHAFT | $12.94 |
Out of Stock | ||
47 | NUT | $19.00 |
Out of Stock | ||
48 | HANDLE RING | $4.00 |
In Stock (Only 2 left) | ||
49 | HANDLE | $7.80 |
Out of Stock | ||
53 | SOCKET HEAD CAP SCREW | $4.00 |
Out of Stock | ||
54 | COVER | $8.68 |
Out of Stock | ||
56 | SCREW | $4.00 |
Out of Stock | ||
58 | HEX WRENCH 3/16" | $4.00 |
Out of Stock | ||
62 | WASHER | $4.00 |
Out of Stock | ||
64 | PIN 3 x 5 | $4.00 |
Out of Stock | ||
65&66 | ERASER/ADAPTER SET | $31.34 |
Out of Stock | ||
70 | REGULATOR | $4.00 |
Out of Stock | ||
71 | RUBBER O-RING | $4.00 |
Out of Stock | ||
72 | RUBBER O-RING | $4.00 |
Out of Stock | ||
73 | EXTERNAL SNAP RING | $4.00 |
In Stock (Only 1 left) | ||
74 | VALVE STEM | $4.00 |
Out of Stock | ||
75 | MUFFLER BODY | $4.00 |
In Stock (Only 1 left) | ||
76 | STAINLESS MESH | $4.00 |
Out of Stock | ||
77 | SILENCER | $4.00 |
Out of Stock | ||
78 | MUFFLER | $4.00 |
Out of Stock | ||
79 | SILENCER | $4.00 |
Out of Stock | ||
80 | SPRING | $4.00 |
Out of Stock | ||
81 | VALVE | $4.00 |
Out of Stock | ||
82 | WASHER | $4.00 |
Out of Stock | ||
Details
Model #6-1039
BrandNAPA
Tool TypePinstripe Remover
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes Submit Order
Accessories
No accessories found for this tool model.