NAPA 6-715
NAPA 6-715
This tool is unavailable for purchase, but replacement parts may be available below.
8" Air Angle Polisher
Replacement Parts
Details
Accessories
Warranty & Documentation
| Ref # | Part | Price |
|---|---|---|
1 | AIR INLET FOR SANDER/POLISHER | $8.06 |
Out of Stock | ||
2 | EXHAUST BUSH. FOR SAND./POLISH. | $6.54 |
Out of Stock | ||
3 | MOTOR HOUSING FOR SANDER/POLISHER | $103.24 |
Out of Stock | ||
5 | HANDLE COVER (SANDER/POLISHER) | $4.00 |
Out of Stock | ||
6 | LEVER FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
7 | THROTTLE LEVER PIN F/SAND/POLSHR | $4.00 |
Out of Stock | ||
9 | THROTTLE VALVE BSH/SAND/POLISHER | $4.00 |
Out of Stock | ||
10 | VALVE STEM FOR SAND./POLISHER | $5.00 |
Out of Stock | ||
11 | O-RING FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
12 | SPRING FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
13 | AIR REGULATOR FOR SAND/POLISHER | $4.20 |
Out of Stock | ||
14 | O-RING FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
15 | O-RING FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
16 | VALVE SCREW FOR SAND/POLISHER | $4.00 |
Out of Stock | ||
17 | GASKET FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
18 | BEARING CAP FOR SAND./POLISHER | $4.00 |
Out of Stock | ||
19 | RETAINER RING FOR SAND/POLISHER | $4.00 |
Out of Stock | ||
20 | BEARING | $9.00 |
Out of Stock | ||
21 | REAR END PLATE F/SAND/POLISHER | $9.74 |
Out of Stock | ||
22 | ROTOR BLADE (SINGLE) | $4.00 |
Out of Stock | ||
23 | ROTOR | $27.34 |
Out of Stock | ||
24 | DOWEL PIN FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
25 | CYLINDER FOR SANDER/POLISHER | $34.66 |
Out of Stock | ||
26 | FRONT PLATE | $11.50 |
Out of Stock | ||
27 | CLAMP NUT/SANDER/POLISHER | $10.86 |
Out of Stock | ||
28 | SPACER FOR SANDER/POLISHER | $6.00 |
Out of Stock | ||
29 | BEARING | $20.20 |
Out of Stock | ||
30 | GEAR | $81.54 |
Out of Stock | ||
32 | CAP SCREW FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
33 | HANDLE | $8.80 |
Out of Stock | ||
34 | ANGLE HOUSING FOR 7" SANDER/POLISHER | $43.00 |
Out of Stock | ||
35 | NEEDLE BEARING/SANDER/POLISHER | $21.38 |
Out of Stock | ||
36 | RETAINER RING/SANDER/POLISHER | $4.00 |
Out of Stock | ||
37 | WAVE WASHER/7" SANDER/POLISHER | $4.00 |
Out of Stock | ||
38 | GEAR | $100.40 |
Out of Stock | ||
39 | BEARING BUSH./7" SANDER/POLISHER | $20.92 |
Out of Stock | ||
40 | BEARING | $14.86 |
Out of Stock | ||
41 | WOODRUFF KEY/SANDER/POLISHER | $4.00 |
Out of Stock | ||
42 | GEAR SHAFT/7" SANDER/POLISHER | $17.78 |
Out of Stock | ||
43 | GASKET/7" SANDER/POLISHER | $4.00 |
Out of Stock | ||
44 | ANGLE HOUSING/7" SANDER/POLISHER | $4.74 |
Out of Stock | ||
45 | SCREW w/LK WSHR/SANDER/POLISHER | $4.00 |
Out of Stock | ||
46 | PAD | $9.80 |
Out of Stock | ||
47 | RET. NUT FOR 7" SANDER/POLISHER | $9.40 |
Out of Stock | ||
48 | O-RING FOR 7" SANDER/POLISHER | $4.00 |
Out of Stock | ||
49 | STOP SPANNER F/7" | $7.54 |
Out of Stock | ||
50 | RUBBER FOR 7" SANDER/POLISHER | $4.00 |
Out of Stock | ||
51 | BEARING PLATE FOR 7" SANDER/POLISHER | $4.00 |
Out of Stock | ||
Model #6-715
BrandNAPA
Tool Type8" Angle Polisher
Powered ByAir
Weight6.5 lbs. / 2.95 kg
We Service? Yes Submit Order
No accessories found for this tool model.
Warranty
Warranty Duration: 1 Year
Documentation
Replacement Parts
| Ref # | Part | Price |
|---|---|---|
1 | AIR INLET FOR SANDER/POLISHER | $8.06 |
Out of Stock | ||
2 | EXHAUST BUSH. FOR SAND./POLISH. | $6.54 |
Out of Stock | ||
3 | MOTOR HOUSING FOR SANDER/POLISHER | $103.24 |
Out of Stock | ||
5 | HANDLE COVER (SANDER/POLISHER) | $4.00 |
Out of Stock | ||
6 | LEVER FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
7 | THROTTLE LEVER PIN F/SAND/POLSHR | $4.00 |
Out of Stock | ||
9 | THROTTLE VALVE BSH/SAND/POLISHER | $4.00 |
Out of Stock | ||
10 | VALVE STEM FOR SAND./POLISHER | $5.00 |
Out of Stock | ||
11 | O-RING FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
12 | SPRING FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
13 | AIR REGULATOR FOR SAND/POLISHER | $4.20 |
Out of Stock | ||
14 | O-RING FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
15 | O-RING FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
16 | VALVE SCREW FOR SAND/POLISHER | $4.00 |
Out of Stock | ||
17 | GASKET FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
18 | BEARING CAP FOR SAND./POLISHER | $4.00 |
Out of Stock | ||
19 | RETAINER RING FOR SAND/POLISHER | $4.00 |
Out of Stock | ||
20 | BEARING | $9.00 |
Out of Stock | ||
21 | REAR END PLATE F/SAND/POLISHER | $9.74 |
Out of Stock | ||
22 | ROTOR BLADE (SINGLE) | $4.00 |
Out of Stock | ||
23 | ROTOR | $27.34 |
Out of Stock | ||
24 | DOWEL PIN FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
25 | CYLINDER FOR SANDER/POLISHER | $34.66 |
Out of Stock | ||
26 | FRONT PLATE | $11.50 |
Out of Stock | ||
27 | CLAMP NUT/SANDER/POLISHER | $10.86 |
Out of Stock | ||
28 | SPACER FOR SANDER/POLISHER | $6.00 |
Out of Stock | ||
29 | BEARING | $20.20 |
Out of Stock | ||
30 | GEAR | $81.54 |
Out of Stock | ||
32 | CAP SCREW FOR SANDER/POLISHER | $4.00 |
Out of Stock | ||
33 | HANDLE | $8.80 |
Out of Stock | ||
34 | ANGLE HOUSING FOR 7" SANDER/POLISHER | $43.00 |
Out of Stock | ||
35 | NEEDLE BEARING/SANDER/POLISHER | $21.38 |
Out of Stock | ||
36 | RETAINER RING/SANDER/POLISHER | $4.00 |
Out of Stock | ||
37 | WAVE WASHER/7" SANDER/POLISHER | $4.00 |
Out of Stock | ||
38 | GEAR | $100.40 |
Out of Stock | ||
39 | BEARING BUSH./7" SANDER/POLISHER | $20.92 |
Out of Stock | ||
40 | BEARING | $14.86 |
Out of Stock | ||
41 | WOODRUFF KEY/SANDER/POLISHER | $4.00 |
Out of Stock | ||
42 | GEAR SHAFT/7" SANDER/POLISHER | $17.78 |
Out of Stock | ||
43 | GASKET/7" SANDER/POLISHER | $4.00 |
Out of Stock | ||
44 | ANGLE HOUSING/7" SANDER/POLISHER | $4.74 |
Out of Stock | ||
45 | SCREW w/LK WSHR/SANDER/POLISHER | $4.00 |
Out of Stock | ||
46 | PAD | $9.80 |
Out of Stock | ||
47 | RET. NUT FOR 7" SANDER/POLISHER | $9.40 |
Out of Stock | ||
48 | O-RING FOR 7" SANDER/POLISHER | $4.00 |
Out of Stock | ||
49 | STOP SPANNER F/7" | $7.54 |
Out of Stock | ||
50 | RUBBER FOR 7" SANDER/POLISHER | $4.00 |
Out of Stock | ||
51 | BEARING PLATE FOR 7" SANDER/POLISHER | $4.00 |
Out of Stock | ||
Details
Model #6-715
BrandNAPA
Tool Type8" Angle Polisher
Powered ByAir
Weight6.5 lbs. / 2.95 kg
We Service? Yes Submit Order
Accessories
No accessories found for this tool model.
Warranty & Documentation
Warranty
Warranty Duration: 1 Year