Snap-on AT154RA
Snap-on AT154RA
This tool is unavailable for purchase, but replacement parts may be available below.
4" Extended Air Cut-Off Tool, Reversible
This tool is similar to CAT850XLR.
Replacement Parts
Details
Accessories
Warranty & Documentation
| Ref # | Part | Price |
|---|---|---|
1 | REGULATOR (FORWARD/REVERSE KNOB) | $5.40 |
Out of Stock | ||
2 | RUBBER O-RING | $4.00 |
Out of Stock | ||
3 | RUBBER O-RING | $4.00 |
Out of Stock | ||
4 | THROTTLE STEM | $4.00 |
Out of Stock | ||
5 | RUBBER O-RING | $4.00 |
Out of Stock | ||
6 | REGULATOR FOR CUT-OFF TOOL | $4.00 |
In Stock (Only 2 left) | ||
7 | AIR INLET | $4.00 |
Out of Stock | ||
8 | EXHAUST SLEEVE/MUFFLER F/CAT850XLR CUTOFF TOOL/DIE GRINDER | $4.00 |
Out of Stock | ||
10 | RUBBER GRIP/PROTECTING RUBBER | $10.80 |
Out of Stock | ||
11 | PIN | $4.00 |
Out of Stock | ||
12 | SAFETY THROTTLE LEVER FOR CUT-OFF TOOL | $6.46 |
In Stock (Only 2 left) | ||
13 | SPRING | $4.00 |
Out of Stock | ||
14 | THROTTLE VALVE | $4.00 |
Out of Stock | ||
15 | THROTTLE SEAT | $4.00 |
In Stock | ||
16 | PIN, 2.85 x 25.7L | $4.00 |
Out of Stock | ||
17 | HOUSING | $23.30 |
Out of Stock | ||
18 | BALL BEARING | $4.95 |
In Stock | ||
19 | GASKET, 17 x 33.2 x 0.8T | $4.00 |
Out of Stock | ||
20 | REAR PLATE | $8.26 |
Out of Stock | ||
22 | ROTOR BLADE (SINGLE) | $4.00 |
Out of Stock | ||
23 | ROTOR | $23.34 |
Out of Stock | ||
24 | CYLINDER | $20.06 |
Out of Stock | ||
25 | ROTOR SPACER/BEARING SPACER | $4.00 |
In Stock (Only 4 left) | ||
26 | LINE-UP PIN | $4.00 |
In Stock (Only 3 left) | ||
27 | FRONT PLATE OLD - PIN STYLE | $7.00 |
Out of Stock | ||
28 | BALL BEARING | $7.13 |
In Stock | ||
29 | COUPLING NUT | $5.20 |
In Stock (Only 1 left) | ||
30 | COUPLING | $4.00 |
Out of Stock | ||
31 | BALL BEARING (699ZZ) | $9.86 |
Out of Stock | ||
32 | NUT | $7.54 |
Out of Stock | ||
33 | CLAMP NUT | $9.40 |
Out of Stock | ||
34 | SPINDLE HOUSING | $28.46 |
Out of Stock | ||
35 | SPINDLE | $30.06 |
Out of Stock | ||
36 | BEARING | $26.17 |
Out of Stock | ||
37 | PINION GEAR (15T) | $28.38 |
Out of Stock | ||
38 | ROUND HEAD SCREW, M4 X 20L | $4.00 |
Out of Stock | ||
39 | ANGLE HOUSING | $20.66 |
Out of Stock | ||
40 | WASHER | $4.00 |
Out of Stock | ||
41 | BEARING | $12.74 |
In Stock (Only 1 left) | ||
43 | SPINDLE/BEVEL GEAR ASSY (18T) | $33.60 |
Out of Stock | ||
45 | NUT | $4.00 |
Out of Stock | ||
46 | SCREW {M4 x 16} SXC601 (L4-42) | $4.00 |
Out of Stock | ||
47 | HANDLE LINK/WHEEL GUARD LINK | $4.00 |
Out of Stock | ||
48 | FACE PLATE | $4.00 |
Out of Stock | ||
49 | HEX FLAT HEAD SCREW (M4 x 10) | $4.00 |
Out of Stock | ||
50 | DISC COVER | $7.80 |
Out of Stock | ||
51 | SCREW (M4 x 6L) GRINDER | $4.00 |
Out of Stock | ||
52 | NUT | $5.20 |
Out of Stock | ||
54 | WASHER | $4.40 |
Out of Stock | ||
55 | NUT FOR CUT-OFF TOOL | $6.46 |
In Stock (Only 5 left) | ||
56 | SCREW w/WASHER M5 X 10L | $4.00 |
In Stock (Only 7 left) | ||
58 | HEX WRENCH/HEX KEY (4 mm) | $4.00 |
Out of Stock | ||
59 | STOP SPANNER (17 mm) | $5.26 |
Out of Stock | ||
60 | O-RING (S16) (ST25150) | $4.00 |
Out of Stock | ||
61 | GREASE FITTING | $4.00 |
In Stock (Only 7 left) | ||
62 | SPRING | $4.00 |
Out of Stock | ||
63 | LOCK BUTTON KIT | $4.00 |
Out of Stock | ||
64 | NUT | $6.20 |
Out of Stock | ||
65 | HANDLE LINK (LEFT) | $6.20 |
In Stock (Only 1 left) | ||
66 | HANDLE LINK RIGHT | $5.80 |
Out of Stock | ||
67 | NUT (M5) | $4.00 |
Out of Stock | ||
68 | SOCKET HEAD CAP SCREW | $4.00 |
Out of Stock | ||
69 | SIDE HANDLE M10 - 1.5T 110 mm LONG | $14.34 |
Out of Stock | ||
70 | MUFFLER BODY | $4.00 |
Out of Stock | ||
71 | WASHER | $4.00 |
Out of Stock | ||
72 | O-RING | $4.00 |
Out of Stock | ||
73 | O-RING | $4.00 |
Out of Stock | ||
76 | NUT | $4.00 |
Out of Stock | ||
77 | SCREW M4 x 8L | $4.00 |
Out of Stock | ||
78 | SNAP RING (RTW-18) | $4.00 |
Out of Stock | ||
79 | FORWARD/REVERSE VALVE | $4.00 |
In Stock (Only 2 left) | ||
80 | RETAINING RING/SNAP RING | $4.00 |
Out of Stock | ||
Model #AT154RA
BrandSnap-on
Tool TypeCut Off Saw
Powered ByAir
Weight3.3 lbs. / 1.5 kg
We Service? Yes Submit Order
Ingersoll-Rand IR9520
3" DIAMETER CUTTING DISCS (5 PK)
$16.00
In Stock (Only 2 left)
Milwaukee Tools ML49-94-4510
ABRSV. WHEEL
$3.60
In Stock (Only 6 left)
Milwaukee Tools ML49-94-4500
4 1/2" x .045 x 7/8" ARBOR A60T METAL CUT-OFF WHEEL (TYPE 1)
$2.90
In Stock
Milwaukee Tools ML49-94-4505
4 1/2" x .045 x 7/8 ARBOR A60T CUT-OFF WHEEL (TYPE 27)
$3.30
In Stock
Milwaukee Tools ML49-94-1500
1 1/2" REINFORCED CUT-OFF WHEELS (5 PK)
$14.20
In Stock (Only 3 left)
Milwaukee Tools ML49-93-7800
4" STEELHEAD DIAMOND CUT-OFF - SEGMENTED
$26.90
In Stock (Only 6 left)
Milwaukee Tools ML49-94-1405
14" x 3/32" x 1" CUT-OFF WHEEL (TYPE 1)
$12.40
In Stock (Only 3 left)
Milwaukee Tools ML49-94-1475
14" x 1/8" x 1" CUT-OFF WHEEL (TYPE 1)
$16.40
In Stock (Only 8 left)
Milwaukee Tools ML49-94-1485
14" x 1/8" x 1" CUT-OFF WHEEL (TYPE 1)
$16.40
In Stock (Only 9 left)
Warranty
Warranty Duration: Unknown
Documentation
Replacement Parts
| Ref # | Part | Price |
|---|---|---|
1 | REGULATOR (FORWARD/REVERSE KNOB) | $5.40 |
Out of Stock | ||
2 | RUBBER O-RING | $4.00 |
Out of Stock | ||
3 | RUBBER O-RING | $4.00 |
Out of Stock | ||
4 | THROTTLE STEM | $4.00 |
Out of Stock | ||
5 | RUBBER O-RING | $4.00 |
Out of Stock | ||
6 | REGULATOR FOR CUT-OFF TOOL | $4.00 |
In Stock (Only 2 left) | ||
7 | AIR INLET | $4.00 |
Out of Stock | ||
8 | EXHAUST SLEEVE/MUFFLER F/CAT850XLR CUTOFF TOOL/DIE GRINDER | $4.00 |
Out of Stock | ||
10 | RUBBER GRIP/PROTECTING RUBBER | $10.80 |
Out of Stock | ||
11 | PIN | $4.00 |
Out of Stock | ||
12 | SAFETY THROTTLE LEVER FOR CUT-OFF TOOL | $6.46 |
In Stock (Only 2 left) | ||
13 | SPRING | $4.00 |
Out of Stock | ||
14 | THROTTLE VALVE | $4.00 |
Out of Stock | ||
15 | THROTTLE SEAT | $4.00 |
In Stock | ||
16 | PIN, 2.85 x 25.7L | $4.00 |
Out of Stock | ||
17 | HOUSING | $23.30 |
Out of Stock | ||
18 | BALL BEARING | $4.95 |
In Stock | ||
19 | GASKET, 17 x 33.2 x 0.8T | $4.00 |
Out of Stock | ||
20 | REAR PLATE | $8.26 |
Out of Stock | ||
22 | ROTOR BLADE (SINGLE) | $4.00 |
Out of Stock | ||
23 | ROTOR | $23.34 |
Out of Stock | ||
24 | CYLINDER | $20.06 |
Out of Stock | ||
25 | ROTOR SPACER/BEARING SPACER | $4.00 |
In Stock (Only 4 left) | ||
26 | LINE-UP PIN | $4.00 |
In Stock (Only 3 left) | ||
27 | FRONT PLATE OLD - PIN STYLE | $7.00 |
Out of Stock | ||
28 | BALL BEARING | $7.13 |
In Stock | ||
29 | COUPLING NUT | $5.20 |
In Stock (Only 1 left) | ||
30 | COUPLING | $4.00 |
Out of Stock | ||
31 | BALL BEARING (699ZZ) | $9.86 |
Out of Stock | ||
32 | NUT | $7.54 |
Out of Stock | ||
33 | CLAMP NUT | $9.40 |
Out of Stock | ||
34 | SPINDLE HOUSING | $28.46 |
Out of Stock | ||
35 | SPINDLE | $30.06 |
Out of Stock | ||
36 | BEARING | $26.17 |
Out of Stock | ||
37 | PINION GEAR (15T) | $28.38 |
Out of Stock | ||
38 | ROUND HEAD SCREW, M4 X 20L | $4.00 |
Out of Stock | ||
39 | ANGLE HOUSING | $20.66 |
Out of Stock | ||
40 | WASHER | $4.00 |
Out of Stock | ||
41 | BEARING | $12.74 |
In Stock (Only 1 left) | ||
43 | SPINDLE/BEVEL GEAR ASSY (18T) | $33.60 |
Out of Stock | ||
45 | NUT | $4.00 |
Out of Stock | ||
46 | SCREW {M4 x 16} SXC601 (L4-42) | $4.00 |
Out of Stock | ||
47 | HANDLE LINK/WHEEL GUARD LINK | $4.00 |
Out of Stock | ||
48 | FACE PLATE | $4.00 |
Out of Stock | ||
49 | HEX FLAT HEAD SCREW (M4 x 10) | $4.00 |
Out of Stock | ||
50 | DISC COVER | $7.80 |
Out of Stock | ||
51 | SCREW (M4 x 6L) GRINDER | $4.00 |
Out of Stock | ||
52 | NUT | $5.20 |
Out of Stock | ||
54 | WASHER | $4.40 |
Out of Stock | ||
55 | NUT FOR CUT-OFF TOOL | $6.46 |
In Stock (Only 5 left) | ||
56 | SCREW w/WASHER M5 X 10L | $4.00 |
In Stock (Only 7 left) | ||
58 | HEX WRENCH/HEX KEY (4 mm) | $4.00 |
Out of Stock | ||
59 | STOP SPANNER (17 mm) | $5.26 |
Out of Stock | ||
60 | O-RING (S16) (ST25150) | $4.00 |
Out of Stock | ||
61 | GREASE FITTING | $4.00 |
In Stock (Only 7 left) | ||
62 | SPRING | $4.00 |
Out of Stock | ||
63 | LOCK BUTTON KIT | $4.00 |
Out of Stock | ||
64 | NUT | $6.20 |
Out of Stock | ||
65 | HANDLE LINK (LEFT) | $6.20 |
In Stock (Only 1 left) | ||
66 | HANDLE LINK RIGHT | $5.80 |
Out of Stock | ||
67 | NUT (M5) | $4.00 |
Out of Stock | ||
68 | SOCKET HEAD CAP SCREW | $4.00 |
Out of Stock | ||
69 | SIDE HANDLE M10 - 1.5T 110 mm LONG | $14.34 |
Out of Stock | ||
70 | MUFFLER BODY | $4.00 |
Out of Stock | ||
71 | WASHER | $4.00 |
Out of Stock | ||
72 | O-RING | $4.00 |
Out of Stock | ||
73 | O-RING | $4.00 |
Out of Stock | ||
76 | NUT | $4.00 |
Out of Stock | ||
77 | SCREW M4 x 8L | $4.00 |
Out of Stock | ||
78 | SNAP RING (RTW-18) | $4.00 |
Out of Stock | ||
79 | FORWARD/REVERSE VALVE | $4.00 |
In Stock (Only 2 left) | ||
80 | RETAINING RING/SNAP RING | $4.00 |
Out of Stock | ||
Details
Model #AT154RA
BrandSnap-on
Tool TypeCut Off Saw
Powered ByAir
Weight3.3 lbs. / 1.5 kg
We Service? Yes Submit Order
Accessories
Ingersoll-Rand IR9520
3" DIAMETER CUTTING DISCS (5 PK)
$16.00
In Stock (Only 2 left)
Milwaukee Tools ML49-94-4510
ABRSV. WHEEL
$3.60
In Stock (Only 6 left)
Milwaukee Tools ML49-94-4500
4 1/2" x .045 x 7/8" ARBOR A60T METAL CUT-OFF WHEEL (TYPE 1)
$2.90
In Stock
Milwaukee Tools ML49-94-4505
4 1/2" x .045 x 7/8 ARBOR A60T CUT-OFF WHEEL (TYPE 27)
$3.30
In Stock
Milwaukee Tools ML49-94-1500
1 1/2" REINFORCED CUT-OFF WHEELS (5 PK)
$14.20
In Stock (Only 3 left)
Milwaukee Tools ML49-93-7800
4" STEELHEAD DIAMOND CUT-OFF - SEGMENTED
$26.90
In Stock (Only 6 left)
Milwaukee Tools ML49-94-1405
14" x 3/32" x 1" CUT-OFF WHEEL (TYPE 1)
$12.40
In Stock (Only 3 left)
Milwaukee Tools ML49-94-1475
14" x 1/8" x 1" CUT-OFF WHEEL (TYPE 1)
$16.40
In Stock (Only 8 left)
Milwaukee Tools ML49-94-1485
14" x 1/8" x 1" CUT-OFF WHEEL (TYPE 1)
$16.40
In Stock (Only 9 left)
Warranty & Documentation
Warranty
Warranty Duration: Unknown