Snap-on AT265
Snap-on AT265
This tool is unavailable for purchase, but replacement parts may be available below.
Air Pinstripe Removal Tool
Replacement Parts
Details
Accessories
Warranty & Documentation
| Ref # | Part | Price |
|---|---|---|
9 | INLET | $4.00 |
In Stock (Only 3 left) | ||
10 | EXHAUST COVER | $4.00 |
In Stock (Only 2 left) | ||
16 | BALL BEARING | $6.94 |
Out of Stock | ||
17 | END PLATE FOR ANGLE DIE GRINDER/SANDER | $4.00 |
Out of Stock | ||
18 | PIN {PINSTRIPE REMOVAL} {ANGLE DIE GRINDER/NIBBLER} | $4.00 |
Out of Stock | ||
19 | ROTOR BLADE (SINGLE) | $4.00 |
Out of Stock | ||
20 | ROTOR | $21.06 |
In Stock (Only 3 left) | ||
21 | CYLINDER FOR ANGLE DIE GRINDER | $6.46 |
Out of Stock | ||
22 | MUFFLER RING | $5.94 |
In Stock (Only 4 left) | ||
23 | FRONT END PLATE | $4.00 |
In Stock (Only 1 left) | ||
24 | BALL BEARING | $6.34 |
Out of Stock | ||
25 | WASHER/PINSTRIPE REMOVAL | $4.00 |
Out of Stock | ||
26 | RING GEAR | $6.46 |
In Stock (Only 4 left) | ||
27 | GEAR | $4.00 |
In Stock (Only 9 left) | ||
28 | SOLID ROLL PIN | $4.00 |
In Stock (Only 6 left) | ||
29 | BALL BEARING | $25.12 |
Out of Stock | ||
30 | GEAR PLATE | $16.94 |
Out of Stock | ||
31 | BEARING | $11.02 |
Out of Stock | ||
32 | CLAMP NUT | $12.46 |
Out of Stock | ||
33 | WASHER | $4.00 |
Out of Stock | ||
34 | SHAFT | $6.46 |
Out of Stock | ||
36 | HANDLE LINK | $12.80 |
Out of Stock | ||
37 | SPANNER WRENCH (14 mm) | $4.00 |
Out of Stock | ||
38 | SIDE HANDLE M10 - 1.5T 110 mm LONG | $14.34 |
Out of Stock | ||
39 | HEX WRENCH/HEX KEY (4 mm) | $4.00 |
Out of Stock | ||
Model #AT265
BrandSnap-on
Tool TypePinstripe Remover
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes Submit Order
No accessories found for this tool model.
Warranty
Warranty Duration: Unknown
Documentation
Replacement Parts
| Ref # | Part | Price |
|---|---|---|
9 | INLET | $4.00 |
In Stock (Only 3 left) | ||
10 | EXHAUST COVER | $4.00 |
In Stock (Only 2 left) | ||
16 | BALL BEARING | $6.94 |
Out of Stock | ||
17 | END PLATE FOR ANGLE DIE GRINDER/SANDER | $4.00 |
Out of Stock | ||
18 | PIN {PINSTRIPE REMOVAL} {ANGLE DIE GRINDER/NIBBLER} | $4.00 |
Out of Stock | ||
19 | ROTOR BLADE (SINGLE) | $4.00 |
Out of Stock | ||
20 | ROTOR | $21.06 |
In Stock (Only 3 left) | ||
21 | CYLINDER FOR ANGLE DIE GRINDER | $6.46 |
Out of Stock | ||
22 | MUFFLER RING | $5.94 |
In Stock (Only 4 left) | ||
23 | FRONT END PLATE | $4.00 |
In Stock (Only 1 left) | ||
24 | BALL BEARING | $6.34 |
Out of Stock | ||
25 | WASHER/PINSTRIPE REMOVAL | $4.00 |
Out of Stock | ||
26 | RING GEAR | $6.46 |
In Stock (Only 4 left) | ||
27 | GEAR | $4.00 |
In Stock (Only 9 left) | ||
28 | SOLID ROLL PIN | $4.00 |
In Stock (Only 6 left) | ||
29 | BALL BEARING | $25.12 |
Out of Stock | ||
30 | GEAR PLATE | $16.94 |
Out of Stock | ||
31 | BEARING | $11.02 |
Out of Stock | ||
32 | CLAMP NUT | $12.46 |
Out of Stock | ||
33 | WASHER | $4.00 |
Out of Stock | ||
34 | SHAFT | $6.46 |
Out of Stock | ||
36 | HANDLE LINK | $12.80 |
Out of Stock | ||
37 | SPANNER WRENCH (14 mm) | $4.00 |
Out of Stock | ||
38 | SIDE HANDLE M10 - 1.5T 110 mm LONG | $14.34 |
Out of Stock | ||
39 | HEX WRENCH/HEX KEY (4 mm) | $4.00 |
Out of Stock | ||
Details
Model #AT265
BrandSnap-on
Tool TypePinstripe Remover
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes Submit Order
Accessories
No accessories found for this tool model.
Warranty & Documentation
Warranty
Warranty Duration: Unknown