Cornwell Tools CAT2PST
Cornwell Tools CAT2PST
This tool is unavailable for purchase, but replacement parts may be available below.
Air Pin Stripe Removal Tool
This tool is similar to 6-1029.
Replacement Parts
Details
Accessories
Warranty & Documentation
| Ref # | Part | Price |
|---|---|---|
1 | SCREW FOR PINSTRIPE REMOVAL TOOL {ANGLE DIE GRINDER} {NIBBLER} | $4.00 |
Out of Stock | ||
2 | RUBBER O-RING | $4.00 |
Out of Stock | ||
3 | RUBBER O-RING | $4.00 |
Out of Stock | ||
4 | AIR REGULATOR | $4.00 |
Out of Stock | ||
5 | THROTTLE SPRING | $4.00 |
Out of Stock | ||
6 | THROTTLE PLUNGER SEAT | $4.00 |
Out of Stock | ||
7 | STEM | $4.00 |
Out of Stock | ||
8 | RUBBER O-RING | $1.57 |
In Stock | ||
9 | INLET | $4.00 |
In Stock (Only 4 left) | ||
10 | EXHAUST COVER | $4.00 |
In Stock (Only 4 left) | ||
11 | RUBBER O-RING | $4.00 |
Out of Stock | ||
12 | SPRING PIN | $4.00 |
Out of Stock | ||
13 | LEVER FOR CAT2PST, 530, 530R, 530XL, 530RXL, 330AN, 700MB. FOR CAT820R, ORDER 820R12 | $5.80 |
Out of Stock | ||
14 | HOUSING COVER | $16.40 |
Out of Stock | ||
15 | HOUSING | $14.34 |
In Stock (Only 2 left) | ||
16 | BALL BEARING | $6.94 |
Out of Stock | ||
17 | END PLATE FOR ANGLE DIE GRINDER/SANDER | $4.00 |
Out of Stock | ||
18 | PIN {PINSTRIPE REMOVAL} {ANGLE DIE GRINDER/NIBBLER} | $4.00 |
Out of Stock | ||
19 | ROTOR BLADE (SINGLE) | $4.00 |
Out of Stock | ||
20 | ROTOR | $21.06 |
In Stock (Only 2 left) | ||
21 | CYLINDER FOR ANGLE DIE GRINDER | $6.46 |
Out of Stock | ||
22 | MUFFLER RING | $5.94 |
In Stock (Only 2 left) | ||
23 | FRONT END PLATE | $4.00 |
In Stock (Only 1 left) | ||
24 | BALL BEARING | $6.34 |
Out of Stock | ||
25 | WASHER/PINSTRIPE REMOVAL | $4.00 |
Out of Stock | ||
26 | RING GEAR | $6.46 |
In Stock (Only 4 left) | ||
27 | GEAR | $4.00 |
In Stock (Only 9 left) | ||
28 | SOLID ROLL PIN | $4.00 |
In Stock (Only 6 left) | ||
29 | BALL BEARING | $25.12 |
Out of Stock | ||
30 | GEAR PLATE | $16.94 |
Out of Stock | ||
31 | BEARING | $11.02 |
Out of Stock | ||
32 | CLAMP NUT | $12.46 |
Out of Stock | ||
33 | WASHER | $4.00 |
Out of Stock | ||
34 | SHAFT | $6.46 |
Out of Stock | ||
36 | HANDLE LINK | $12.80 |
Out of Stock | ||
37 | SPANNER WRENCH (14 mm) | $4.00 |
Out of Stock | ||
38 | SIDE HANDLE M10 - 1.5T 110 mm LONG | $14.34 |
Out of Stock | ||
39 | HEX WRENCH/HEX KEY (4 mm) | $4.00 |
Out of Stock | ||
40 | SCREW FOR PINSTRIPE REMOVAL TOOL | $4.00 |
Out of Stock | ||
42 | HOLDER/WASHER SET | $8.80 |
Out of Stock | ||
43 | MALE END ADAPTER {FOR 3M PAD} | $4.40 |
Out of Stock | ||
Model #CAT2PST
BrandCornwell Tools
Tool TypePinstripe Remover
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes Submit Order
No accessories found for this tool model.
Warranty
Warranty Duration: 1 Year
Documentation
Replacement Parts
| Ref # | Part | Price |
|---|---|---|
1 | SCREW FOR PINSTRIPE REMOVAL TOOL {ANGLE DIE GRINDER} {NIBBLER} | $4.00 |
Out of Stock | ||
2 | RUBBER O-RING | $4.00 |
Out of Stock | ||
3 | RUBBER O-RING | $4.00 |
Out of Stock | ||
4 | AIR REGULATOR | $4.00 |
Out of Stock | ||
5 | THROTTLE SPRING | $4.00 |
Out of Stock | ||
6 | THROTTLE PLUNGER SEAT | $4.00 |
Out of Stock | ||
7 | STEM | $4.00 |
Out of Stock | ||
8 | RUBBER O-RING | $1.57 |
In Stock | ||
9 | INLET | $4.00 |
In Stock (Only 4 left) | ||
10 | EXHAUST COVER | $4.00 |
In Stock (Only 4 left) | ||
11 | RUBBER O-RING | $4.00 |
Out of Stock | ||
12 | SPRING PIN | $4.00 |
Out of Stock | ||
13 | LEVER FOR CAT2PST, 530, 530R, 530XL, 530RXL, 330AN, 700MB. FOR CAT820R, ORDER 820R12 | $5.80 |
Out of Stock | ||
14 | HOUSING COVER | $16.40 |
Out of Stock | ||
15 | HOUSING | $14.34 |
In Stock (Only 2 left) | ||
16 | BALL BEARING | $6.94 |
Out of Stock | ||
17 | END PLATE FOR ANGLE DIE GRINDER/SANDER | $4.00 |
Out of Stock | ||
18 | PIN {PINSTRIPE REMOVAL} {ANGLE DIE GRINDER/NIBBLER} | $4.00 |
Out of Stock | ||
19 | ROTOR BLADE (SINGLE) | $4.00 |
Out of Stock | ||
20 | ROTOR | $21.06 |
In Stock (Only 2 left) | ||
21 | CYLINDER FOR ANGLE DIE GRINDER | $6.46 |
Out of Stock | ||
22 | MUFFLER RING | $5.94 |
In Stock (Only 2 left) | ||
23 | FRONT END PLATE | $4.00 |
In Stock (Only 1 left) | ||
24 | BALL BEARING | $6.34 |
Out of Stock | ||
25 | WASHER/PINSTRIPE REMOVAL | $4.00 |
Out of Stock | ||
26 | RING GEAR | $6.46 |
In Stock (Only 4 left) | ||
27 | GEAR | $4.00 |
In Stock (Only 9 left) | ||
28 | SOLID ROLL PIN | $4.00 |
In Stock (Only 6 left) | ||
29 | BALL BEARING | $25.12 |
Out of Stock | ||
30 | GEAR PLATE | $16.94 |
Out of Stock | ||
31 | BEARING | $11.02 |
Out of Stock | ||
32 | CLAMP NUT | $12.46 |
Out of Stock | ||
33 | WASHER | $4.00 |
Out of Stock | ||
34 | SHAFT | $6.46 |
Out of Stock | ||
36 | HANDLE LINK | $12.80 |
Out of Stock | ||
37 | SPANNER WRENCH (14 mm) | $4.00 |
Out of Stock | ||
38 | SIDE HANDLE M10 - 1.5T 110 mm LONG | $14.34 |
Out of Stock | ||
39 | HEX WRENCH/HEX KEY (4 mm) | $4.00 |
Out of Stock | ||
40 | SCREW FOR PINSTRIPE REMOVAL TOOL | $4.00 |
Out of Stock | ||
42 | HOLDER/WASHER SET | $8.80 |
Out of Stock | ||
43 | MALE END ADAPTER {FOR 3M PAD} | $4.40 |
Out of Stock | ||
Details
Model #CAT2PST
BrandCornwell Tools
Tool TypePinstripe Remover
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes Submit Order
Accessories
No accessories found for this tool model.
Warranty & Documentation
Warranty
Warranty Duration: 1 Year