Cornwell Tools CAT380XL
Cornwell Tools CAT380XL
This tool is unavailable for purchase, but replacement parts may be available below.
3/8" Drive Extended Length Air Ratchet
Replacement Parts
Details
Accessories
Warranty & Documentation
| Ref # | Part | Price |
|---|---|---|
* | CAT2000MRR RATCHET HEAD KIT 3/8" | $36.00 |
In Stock (Only 3 left) | ||
1 | HOUSING w/BUSHING | $11.80 |
Out of Stock | ||
2 | THROTTLE LEVER | $5.54 |
Out of Stock | ||
3 | PIN FOR ANGLE DIE GRINDER | $4.00 |
Out of Stock | ||
4 | O-RING FOR 1/4" ANGLE DIE GRINDER | $4.00 |
Out of Stock | ||
5 | RUBBER O-RING | $4.00 |
Out of Stock | ||
6 | THROTTLE PIN | $4.00 |
Out of Stock | ||
7 | SPRING FOR 1/4" ANGLE DIE GRINDER | $4.00 |
Out of Stock | ||
8 | REGULATOR FOR 1/4" ANGLE DIE GRINDER | $5.00 |
Out of Stock | ||
9 | RUBBER O-RING | $4.00 |
Out of Stock | ||
10 | O-RING FOR 1/4" ANGLE DIE GRINDER | $4.00 |
Out of Stock | ||
11 | VALVE PLUG | $4.00 |
Out of Stock | ||
12 | AIR INLET | $5.54 |
Out of Stock | ||
14 | BALL BEARING | $6.94 |
Out of Stock | ||
15 | REAR END PLATE w/STEEL BALL | $5.74 |
Out of Stock | ||
16 | STEEL BALL | $4.00 |
Out of Stock | ||
17 | CYLINDER | $12.80 |
In Stock (Only 1 left) | ||
18 | ROTOR | $14.34 |
Out of Stock | ||
19 | ROTOR BLADE (SINGLE) | $4.00 |
In Stock (Only 1 left) | ||
20 | FRONT END PLATE w/STEEL BALLS | $5.54 |
Out of Stock | ||
21 | BALL BEARING | $6.34 |
Out of Stock | ||
22 | BUSHING | $4.00 |
Out of Stock | ||
23 | INTERNAL GEAR | $8.06 |
Out of Stock | ||
24 | PLANET GEAR - 4 mm NEW STYLE | $7.46 |
Out of Stock | ||
26 | CLAMP NUT | $7.86 |
Out of Stock | ||
27 | CRANK SHAFT | $56.48 |
In Stock (Only 2 left) | ||
28 | DRIVE BUSHING | $4.26 |
Out of Stock | ||
29 | 1/4" Small RATCHET YOKE | $27.94 |
Out of Stock | ||
30 | RATCHET HOUSING | $18.40 |
In Stock (Only 2 left) | ||
31 | NEEDLE BEARING | $9.34 |
Out of Stock | ||
32 | HOUSING EXTENSION | $28.24 |
In Stock (Only 2 left) | ||
46 | GREASE FITTING/DRILL | $4.14 |
Out of Stock | ||
Model #CAT380XL
BrandCornwell Tools
Tool Type3/8" Ratchet
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes Submit Order
Replacement Parts
| Ref # | Part | Price |
|---|---|---|
* | CAT2000MRR RATCHET HEAD KIT 3/8" | $36.00 |
In Stock (Only 3 left) | ||
1 | HOUSING w/BUSHING | $11.80 |
Out of Stock | ||
2 | THROTTLE LEVER | $5.54 |
Out of Stock | ||
3 | PIN FOR ANGLE DIE GRINDER | $4.00 |
Out of Stock | ||
4 | O-RING FOR 1/4" ANGLE DIE GRINDER | $4.00 |
Out of Stock | ||
5 | RUBBER O-RING | $4.00 |
Out of Stock | ||
6 | THROTTLE PIN | $4.00 |
Out of Stock | ||
7 | SPRING FOR 1/4" ANGLE DIE GRINDER | $4.00 |
Out of Stock | ||
8 | REGULATOR FOR 1/4" ANGLE DIE GRINDER | $5.00 |
Out of Stock | ||
9 | RUBBER O-RING | $4.00 |
Out of Stock | ||
10 | O-RING FOR 1/4" ANGLE DIE GRINDER | $4.00 |
Out of Stock | ||
11 | VALVE PLUG | $4.00 |
Out of Stock | ||
12 | AIR INLET | $5.54 |
Out of Stock | ||
14 | BALL BEARING | $6.94 |
Out of Stock | ||
15 | REAR END PLATE w/STEEL BALL | $5.74 |
Out of Stock | ||
16 | STEEL BALL | $4.00 |
Out of Stock | ||
17 | CYLINDER | $12.80 |
In Stock (Only 1 left) | ||
18 | ROTOR | $14.34 |
Out of Stock | ||
19 | ROTOR BLADE (SINGLE) | $4.00 |
In Stock (Only 1 left) | ||
20 | FRONT END PLATE w/STEEL BALLS | $5.54 |
Out of Stock | ||
21 | BALL BEARING | $6.34 |
Out of Stock | ||
22 | BUSHING | $4.00 |
Out of Stock | ||
23 | INTERNAL GEAR | $8.06 |
Out of Stock | ||
24 | PLANET GEAR - 4 mm NEW STYLE | $7.46 |
Out of Stock | ||
26 | CLAMP NUT | $7.86 |
Out of Stock | ||
27 | CRANK SHAFT | $56.48 |
In Stock (Only 2 left) | ||
28 | DRIVE BUSHING | $4.26 |
Out of Stock | ||
29 | 1/4" Small RATCHET YOKE | $27.94 |
Out of Stock | ||
30 | RATCHET HOUSING | $18.40 |
In Stock (Only 2 left) | ||
31 | NEEDLE BEARING | $9.34 |
Out of Stock | ||
32 | HOUSING EXTENSION | $28.24 |
In Stock (Only 2 left) | ||
46 | GREASE FITTING/DRILL | $4.14 |
Out of Stock | ||