Cornwell Tools CAT530RXL
Cornwell Tools CAT530RXL
This tool is unavailable for purchase, but replacement parts may be available below.
Heavy Duty Right Angle Extra Long Air Die Grinder
Replacement Parts
Details
Accessories
Warranty & Documentation
| Ref # | Part | Price |
|---|---|---|
1 | SCREW FOR PINSTRIPE REMOVAL TOOL {ANGLE DIE GRINDER} {NIBBLER} | $4.00 |
Out of Stock | ||
2 | RUBBER O-RING | $4.00 |
Out of Stock | ||
3 | RUBBER O-RING | $4.00 |
Out of Stock | ||
4 | AIR REGULATOR | $4.00 |
Out of Stock | ||
5 | THROTTLE SPRING | $4.00 |
Out of Stock | ||
6 | THROTTLE PLUNGER SEAT | $4.00 |
Out of Stock | ||
7 | STEM | $4.00 |
Out of Stock | ||
8 | RUBBER O-RING | $1.57 |
In Stock | ||
9 | INLET | $4.00 |
In Stock (Only 4 left) | ||
10 | EXHAUST COVER | $4.00 |
In Stock (Only 4 left) | ||
11 | RUBBER O-RING | $4.00 |
Out of Stock | ||
12 | SPRING PIN | $4.00 |
Out of Stock | ||
13 | LEVER FOR CAT2PST, 530, 530R, 530XL, 530RXL, 330AN, 700MB. FOR CAT820R, ORDER 820R12 | $5.80 |
Out of Stock | ||
14 | HOUSING COVER FOR CAT530RXL | $16.40 |
Out of Stock | ||
15 | HOUSING {CAT530RXL} | $14.34 |
Out of Stock | ||
16 | BALL BEARING | $6.94 |
Out of Stock | ||
17 | END PLATE FOR ANGLE DIE GRINDER/SANDER | $4.00 |
Out of Stock | ||
18 | PIN {PINSTRIPE REMOVAL} {ANGLE DIE GRINDER/NIBBLER} | $4.00 |
Out of Stock | ||
19 | ROTOR BLADE (SINGLE) | $4.00 |
Out of Stock | ||
20 | ROTOR {CAT530RXL} | $19.00 |
Out of Stock | ||
21 | CYLINDER | $19.60 |
Out of Stock | ||
22 | MUFFLER RING | $5.94 |
In Stock (Only 2 left) | ||
23 | BEARING SPACER FOR GRINDER | $4.00 |
Out of Stock | ||
24 | FRONT END PLATE | $7.80 |
Out of Stock | ||
25 | BALL BEARING | $6.34 |
Out of Stock | ||
26 | WASHER FOR GRINDER | $4.00 |
Out of Stock | ||
27 | NUT - FOR GRINDER | $4.00 |
In Stock (Only 2 left) | ||
28 | COUPLING NUT | $5.20 |
In Stock (Only 1 left) | ||
29 | COUPLING | $4.00 |
Out of Stock | ||
30 | BALL BEARING (699ZZ) | $9.86 |
Out of Stock | ||
31 | CLAMP NUT | $10.46 |
Out of Stock | ||
32 | SPINDLE HOUSING FOR GRINDER | $14.34 |
Out of Stock | ||
33 | SPINDLE SHAFT | $14.34 |
Out of Stock | ||
34 | BALL BEARING (609ZZ) | $9.46 |
Out of Stock | ||
35 | PINION GEAR | $14.34 |
In Stock (Only 5 left) | ||
36 | ANGLE HOUSING FOR CAT530RXL | $14.60 |
Out of Stock | ||
37 | GREASE FITTING | $4.00 |
In Stock (Only 7 left) | ||
38 | SNAP RING FOR GRINDER | $4.00 |
Out of Stock | ||
39 | BEVEL GEAR | $14.34 |
In Stock (Only 3 left) | ||
40 | BALL BEARING (6000ZZ) | $15.46 |
Out of Stock | ||
41 | SPINDLE | $11.74 |
Out of Stock | ||
42 | SPINDLE KEY | $4.00 |
In Stock (Only 6 left) | ||
43 | CLAMP NUT/ANGLE HOUSING NUT FOR GRINDER | $5.20 |
In Stock (Only 1 left) | ||
44 | 1/4" COLLET | $7.40 |
Out of Stock | ||
45 | COLLET NUT | $6.20 |
In Stock (Only 6 left) | ||
46 | SPANNER WRENCH (14 mm) | $4.00 |
Out of Stock | ||
47 | SPANNER WRENCH (19 mm) | $5.74 |
Out of Stock | ||
Model #CAT530RXL
BrandCornwell Tools
Tool TypeRight Angle Die Grinder
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes Submit Order
Ingersoll-Rand IR03A-MEDPD
3" MEDIUM ROLOC 1/4" MANDREL
$15.00
In Stock (Only 2 left)
Ingersoll-Rand IR02A-MEDPD
2" MEDIUM ROLOC 1/4" MANDREL
$14.00
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-MEDBR
2" SURFACE PREP MEDIUM - DISC
$2.50
In Stock
Ingersoll-Rand IR02A-CRSBS-4
2" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$38.40
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-CRSB
2" COARSE QUICK-STRIP KIT - 3 DISCS W/BACKING PAD & POST
$26.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-240AO-25
3" AO SERIES SANDING DISC - 240 GRIT
$34.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-MEDBR-25
3" MEDIUM ROLL LOC BROWN
$68.10
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR015A-240AO
1.5" AO SERIES SANDING DISC - 240 GRIT
$1.68
In Stock
Ingersoll-Rand IR03A-CRSBS-4
3" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$43.00
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-120AO
2" AO SERIES SANDING DISC - 120 GRIT
$1.68
In Stock
Warranty
Warranty Duration: 1 Year
Documentation
Replacement Parts
| Ref # | Part | Price |
|---|---|---|
1 | SCREW FOR PINSTRIPE REMOVAL TOOL {ANGLE DIE GRINDER} {NIBBLER} | $4.00 |
Out of Stock | ||
2 | RUBBER O-RING | $4.00 |
Out of Stock | ||
3 | RUBBER O-RING | $4.00 |
Out of Stock | ||
4 | AIR REGULATOR | $4.00 |
Out of Stock | ||
5 | THROTTLE SPRING | $4.00 |
Out of Stock | ||
6 | THROTTLE PLUNGER SEAT | $4.00 |
Out of Stock | ||
7 | STEM | $4.00 |
Out of Stock | ||
8 | RUBBER O-RING | $1.57 |
In Stock | ||
9 | INLET | $4.00 |
In Stock (Only 4 left) | ||
10 | EXHAUST COVER | $4.00 |
In Stock (Only 4 left) | ||
11 | RUBBER O-RING | $4.00 |
Out of Stock | ||
12 | SPRING PIN | $4.00 |
Out of Stock | ||
13 | LEVER FOR CAT2PST, 530, 530R, 530XL, 530RXL, 330AN, 700MB. FOR CAT820R, ORDER 820R12 | $5.80 |
Out of Stock | ||
14 | HOUSING COVER FOR CAT530RXL | $16.40 |
Out of Stock | ||
15 | HOUSING {CAT530RXL} | $14.34 |
Out of Stock | ||
16 | BALL BEARING | $6.94 |
Out of Stock | ||
17 | END PLATE FOR ANGLE DIE GRINDER/SANDER | $4.00 |
Out of Stock | ||
18 | PIN {PINSTRIPE REMOVAL} {ANGLE DIE GRINDER/NIBBLER} | $4.00 |
Out of Stock | ||
19 | ROTOR BLADE (SINGLE) | $4.00 |
Out of Stock | ||
20 | ROTOR {CAT530RXL} | $19.00 |
Out of Stock | ||
21 | CYLINDER | $19.60 |
Out of Stock | ||
22 | MUFFLER RING | $5.94 |
In Stock (Only 2 left) | ||
23 | BEARING SPACER FOR GRINDER | $4.00 |
Out of Stock | ||
24 | FRONT END PLATE | $7.80 |
Out of Stock | ||
25 | BALL BEARING | $6.34 |
Out of Stock | ||
26 | WASHER FOR GRINDER | $4.00 |
Out of Stock | ||
27 | NUT - FOR GRINDER | $4.00 |
In Stock (Only 2 left) | ||
28 | COUPLING NUT | $5.20 |
In Stock (Only 1 left) | ||
29 | COUPLING | $4.00 |
Out of Stock | ||
30 | BALL BEARING (699ZZ) | $9.86 |
Out of Stock | ||
31 | CLAMP NUT | $10.46 |
Out of Stock | ||
32 | SPINDLE HOUSING FOR GRINDER | $14.34 |
Out of Stock | ||
33 | SPINDLE SHAFT | $14.34 |
Out of Stock | ||
34 | BALL BEARING (609ZZ) | $9.46 |
Out of Stock | ||
35 | PINION GEAR | $14.34 |
In Stock (Only 5 left) | ||
36 | ANGLE HOUSING FOR CAT530RXL | $14.60 |
Out of Stock | ||
37 | GREASE FITTING | $4.00 |
In Stock (Only 7 left) | ||
38 | SNAP RING FOR GRINDER | $4.00 |
Out of Stock | ||
39 | BEVEL GEAR | $14.34 |
In Stock (Only 3 left) | ||
40 | BALL BEARING (6000ZZ) | $15.46 |
Out of Stock | ||
41 | SPINDLE | $11.74 |
Out of Stock | ||
42 | SPINDLE KEY | $4.00 |
In Stock (Only 6 left) | ||
43 | CLAMP NUT/ANGLE HOUSING NUT FOR GRINDER | $5.20 |
In Stock (Only 1 left) | ||
44 | 1/4" COLLET | $7.40 |
Out of Stock | ||
45 | COLLET NUT | $6.20 |
In Stock (Only 6 left) | ||
46 | SPANNER WRENCH (14 mm) | $4.00 |
Out of Stock | ||
47 | SPANNER WRENCH (19 mm) | $5.74 |
Out of Stock | ||
Details
Model #CAT530RXL
BrandCornwell Tools
Tool TypeRight Angle Die Grinder
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes Submit Order
Accessories
Ingersoll-Rand IR03A-MEDPD
3" MEDIUM ROLOC 1/4" MANDREL
$15.00
In Stock (Only 2 left)
Ingersoll-Rand IR02A-MEDPD
2" MEDIUM ROLOC 1/4" MANDREL
$14.00
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-MEDBR
2" SURFACE PREP MEDIUM - DISC
$2.50
In Stock
Ingersoll-Rand IR02A-CRSBS-4
2" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$38.40
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-CRSB
2" COARSE QUICK-STRIP KIT - 3 DISCS W/BACKING PAD & POST
$26.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-240AO-25
3" AO SERIES SANDING DISC - 240 GRIT
$34.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-MEDBR-25
3" MEDIUM ROLL LOC BROWN
$68.10
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR015A-240AO
1.5" AO SERIES SANDING DISC - 240 GRIT
$1.68
In Stock
Ingersoll-Rand IR03A-CRSBS-4
3" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$43.00
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-120AO
2" AO SERIES SANDING DISC - 120 GRIT
$1.68
In Stock
Warranty & Documentation
Warranty
Warranty Duration: 1 Year