Cornwell Tools CAT540RG
Cornwell Tools CAT540RG
This tool is unavailable for purchase, but replacement parts may be available below.
Right Angle Air Die Grinder, 0.75 hp - Neon Green
Replacement Parts
Details
Accessories
Warranty & Documentation
| Ref # | Part | Price |
|---|---|---|
1 | REGULATOR | $4.00 |
In Stock | ||
2 | RUBBER O-RING | $4.00 |
Out of Stock | ||
3 | RUBBER O-RING | $4.00 |
Out of Stock | ||
4 | EXTERNAL SNAP RING | $4.00 |
Out of Stock | ||
5 | RUBBER O-RING | $4.00 |
In Stock (Only 1 left) | ||
6 | THROTTLE STEM | $4.00 |
Out of Stock | ||
7 | THROTTLE INLET | $6.20 |
In Stock (Only 3 left) | ||
8 | MUFFLER | $4.94 |
In Stock (Only 8 left) | ||
9 | MUFFLER COTTON | $4.00 |
In Stock (Only 2 left) | ||
9-1 | STAINLESS MESH | $4.00 |
Out of Stock | ||
9-2 | MUFFLER COTTON | $4.00 |
In Stock (Only 2 left) | ||
10 | RUBBER O-RING | $4.00 |
Out of Stock | ||
11 | THROTTLE SPRING | $4.00 |
Out of Stock | ||
12 | THROTTLE VALVE | $4.00 |
Out of Stock | ||
13 | THROTTLE SEAT | $4.00 |
In Stock | ||
14 | CORNWELL NEON GREEN GRIP | $8.00 |
Out of Stock | ||
15 | HOUSING | $23.54 |
Out of Stock | ||
16 | SAFETY THROTTLE LEVER | $7.80 |
In Stock (Only 2 left) | ||
17 | SOLID ROLL PIN/SPRING PIN/THROTTLE LEVER PIN (3x24L) | $4.00 |
Out of Stock | ||
18 | BALL BEARING (626ZZ) | $13.14 |
Out of Stock | ||
19 | REAR END PLATE | $9.14 |
In Stock | ||
20 | ROTOR BLADE (SINGLE) | $4.00 |
Out of Stock | ||
21 | ROTOR | $19.60 |
In Stock (Only 1 left) | ||
22 | CYLINDER & END PLATE CONVERSION KIT | $66.28 |
In Stock (Only 1 left) | ||
23 | LINE-UP PIN | $4.00 |
In Stock (Only 3 left) | ||
24 | ROTOR SPACER/BEARING SPACER | $4.00 |
In Stock (Only 4 left) | ||
25 | FRONT END PLATE - NEW THIN - HOLE STYLE | $11.74 |
Out of Stock | ||
26 | BALL BEARING (6000ZZ) | $15.46 |
Out of Stock | ||
27 | PINION GEAR/BEVEL GEAR (15T) | $26.00 |
In Stock | ||
28 | NUT | $6.20 |
Out of Stock | ||
29 | CLAMP NUT | $9.40 |
Out of Stock | ||
30 | ANGLE HOUSING | $18.60 |
Out of Stock | ||
31 | GREASE FITTING | $4.00 |
In Stock (Only 7 left) | ||
32 | BALL BEARING | $6.34 |
Out of Stock | ||
33 | SNAP RING | $4.00 |
Out of Stock | ||
34 | BEVEL GEAR FOR DIE GRINDER | $24.74 |
In Stock (Only 5 left) | ||
36 | SHAFT FOR DIE GRINDER | $20.86 |
Out of Stock | ||
37 | SPINDLE KEY | $4.00 |
In Stock | ||
38 | CLAMP NUT/ANGLE HOUSING NUT FOR GRINDER | $5.20 |
Out of Stock | ||
39 | 1/4" COLLET | $7.80 |
Out of Stock | ||
40 | 1/4" COLLET NUT - Straight | $6.20 |
In Stock (Only 9 left) | ||
41 | STOP SPANNER (14 mm) | $6.46 |
Out of Stock | ||
42 | STOP SPANNER (19 mm) | $7.00 |
Out of Stock | ||
Model #CAT540RG
BrandCornwell Tools
Tool TypeRight Angle Die Grinder
Powered ByAir
Weight2 lbs. / 0.91 kg
We Service? Yes Submit Order
Ingersoll-Rand IR03A-MEDPD
3" MEDIUM ROLOC 1/4" MANDREL
$15.00
In Stock (Only 5 left)
Ingersoll-Rand IR02A-MEDPD
2" MEDIUM ROLOC 1/4" MANDREL
$14.00
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-MEDBR
2" SURFACE PREP MEDIUM - DISC
$2.50
In Stock
Ingersoll-Rand IR02A-CRSBS-4
2" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$38.40
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-CRSB
2" COARSE QUICK-STRIP KIT - 3 DISCS W/BACKING PAD & POST
$26.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-240AO-25
3" AO SERIES SANDING DISC - 240 GRIT
$34.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-MEDBR-25
3" MEDIUM ROLL LOC BROWN
$68.10
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR015A-240AO
1.5" AO SERIES SANDING DISC - 240 GRIT
$1.68
In Stock
Ingersoll-Rand IR03A-CRSBS-4
3" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$43.00
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-120AO
2" AO SERIES SANDING DISC - 120 GRIT
$1.68
In Stock
Warranty
Warranty Duration: 1 Year
Documentation
Replacement Parts
| Ref # | Part | Price |
|---|---|---|
1 | REGULATOR | $4.00 |
In Stock | ||
2 | RUBBER O-RING | $4.00 |
Out of Stock | ||
3 | RUBBER O-RING | $4.00 |
Out of Stock | ||
4 | EXTERNAL SNAP RING | $4.00 |
Out of Stock | ||
5 | RUBBER O-RING | $4.00 |
In Stock (Only 1 left) | ||
6 | THROTTLE STEM | $4.00 |
Out of Stock | ||
7 | THROTTLE INLET | $6.20 |
In Stock (Only 3 left) | ||
8 | MUFFLER | $4.94 |
In Stock (Only 8 left) | ||
9 | MUFFLER COTTON | $4.00 |
In Stock (Only 2 left) | ||
9-1 | STAINLESS MESH | $4.00 |
Out of Stock | ||
9-2 | MUFFLER COTTON | $4.00 |
In Stock (Only 2 left) | ||
10 | RUBBER O-RING | $4.00 |
Out of Stock | ||
11 | THROTTLE SPRING | $4.00 |
Out of Stock | ||
12 | THROTTLE VALVE | $4.00 |
Out of Stock | ||
13 | THROTTLE SEAT | $4.00 |
In Stock | ||
14 | CORNWELL NEON GREEN GRIP | $8.00 |
Out of Stock | ||
15 | HOUSING | $23.54 |
Out of Stock | ||
16 | SAFETY THROTTLE LEVER | $7.80 |
In Stock (Only 2 left) | ||
17 | SOLID ROLL PIN/SPRING PIN/THROTTLE LEVER PIN (3x24L) | $4.00 |
Out of Stock | ||
18 | BALL BEARING (626ZZ) | $13.14 |
Out of Stock | ||
19 | REAR END PLATE | $9.14 |
In Stock | ||
20 | ROTOR BLADE (SINGLE) | $4.00 |
Out of Stock | ||
21 | ROTOR | $19.60 |
In Stock (Only 1 left) | ||
22 | CYLINDER & END PLATE CONVERSION KIT | $66.28 |
In Stock (Only 1 left) | ||
23 | LINE-UP PIN | $4.00 |
In Stock (Only 3 left) | ||
24 | ROTOR SPACER/BEARING SPACER | $4.00 |
In Stock (Only 4 left) | ||
25 | FRONT END PLATE - NEW THIN - HOLE STYLE | $11.74 |
Out of Stock | ||
26 | BALL BEARING (6000ZZ) | $15.46 |
Out of Stock | ||
27 | PINION GEAR/BEVEL GEAR (15T) | $26.00 |
In Stock | ||
28 | NUT | $6.20 |
Out of Stock | ||
29 | CLAMP NUT | $9.40 |
Out of Stock | ||
30 | ANGLE HOUSING | $18.60 |
Out of Stock | ||
31 | GREASE FITTING | $4.00 |
In Stock (Only 7 left) | ||
32 | BALL BEARING | $6.34 |
Out of Stock | ||
33 | SNAP RING | $4.00 |
Out of Stock | ||
34 | BEVEL GEAR FOR DIE GRINDER | $24.74 |
In Stock (Only 5 left) | ||
36 | SHAFT FOR DIE GRINDER | $20.86 |
Out of Stock | ||
37 | SPINDLE KEY | $4.00 |
In Stock | ||
38 | CLAMP NUT/ANGLE HOUSING NUT FOR GRINDER | $5.20 |
Out of Stock | ||
39 | 1/4" COLLET | $7.80 |
Out of Stock | ||
40 | 1/4" COLLET NUT - Straight | $6.20 |
In Stock (Only 9 left) | ||
41 | STOP SPANNER (14 mm) | $6.46 |
Out of Stock | ||
42 | STOP SPANNER (19 mm) | $7.00 |
Out of Stock | ||
Details
Model #CAT540RG
BrandCornwell Tools
Tool TypeRight Angle Die Grinder
Powered ByAir
Weight2 lbs. / 0.91 kg
We Service? Yes Submit Order
Accessories
Ingersoll-Rand IR03A-MEDPD
3" MEDIUM ROLOC 1/4" MANDREL
$15.00
In Stock (Only 5 left)
Ingersoll-Rand IR02A-MEDPD
2" MEDIUM ROLOC 1/4" MANDREL
$14.00
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-MEDBR
2" SURFACE PREP MEDIUM - DISC
$2.50
In Stock
Ingersoll-Rand IR02A-CRSBS-4
2" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$38.40
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-CRSB
2" COARSE QUICK-STRIP KIT - 3 DISCS W/BACKING PAD & POST
$26.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-240AO-25
3" AO SERIES SANDING DISC - 240 GRIT
$34.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-MEDBR-25
3" MEDIUM ROLL LOC BROWN
$68.10
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR015A-240AO
1.5" AO SERIES SANDING DISC - 240 GRIT
$1.68
In Stock
Ingersoll-Rand IR03A-CRSBS-4
3" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$43.00
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-120AO
2" AO SERIES SANDING DISC - 120 GRIT
$1.68
In Stock
Warranty & Documentation
Warranty
Warranty Duration: 1 Year