Snap-on IM1800
Snap-on IM1800
This tool is unavailable for purchase, but replacement parts may be available below.
1" Drive Air Impact Wrench
Replacement Parts
Details
Accessories
Warranty & Documentation
| Ref # | Part | Price |
|---|---|---|
1 | THROTTLE HANDLE | $411.82 |
Out of Stock | ||
2 | O-RING | $4.51 |
Out of Stock | ||
3 | VALVE PIN | $26.99 |
Out of Stock | ||
4 | VALVE BALL | $33.23 |
In Stock (Only 1 left) | ||
5 | THROTTLE SPRING | $4.93 |
Out of Stock | ||
6 | O-RING | $4.66 |
Out of Stock | ||
7 | HOSE ADAPTER | $31.58 |
Out of Stock | ||
8 | O-RINGS (SET OF 2) | $7.66 |
In Stock (Only 2 left) | ||
9 | REVERSE REGULATOR | $56.90 |
Out of Stock | ||
10 | REVERSE LEVER | $31.73 |
Out of Stock | ||
11 | CAP SCREW | $7.97 |
Out of Stock | ||
12 | ROLL PINS (SET OF 2) | $10.62 |
Out of Stock | ||
13 | THROTTLE TRIGGER (INSIDE) | $13.91 |
Out of Stock | ||
14 | HANDLE GRIP | $25.57 |
Out of Stock | ||
15 | CAP SCREWS w/WASHERS (SET OF 8) | $35.57 |
Out of Stock | ||
16 | GASKET | $19.79 |
In Stock (Only 1 left) | ||
17 | BALL BEARINGS (SET OF 2) | $73.93 |
Out of Stock | ||
18 | REAR PLATE | $78.24 |
Out of Stock | ||
19 | ROTOR BLADES (SET OF 6) | $107.30 |
Out of Stock | ||
20 | ROTOR | $288.94 |
Out of Stock | ||
21 | CYLINDER | $232.53 |
Out of Stock | ||
22 | GUIDE PIN | $15.16 |
Out of Stock | ||
23 | FRONT PLATE | $90.54 |
Out of Stock | ||
24 | O-RING | $14.38 |
Out of Stock | ||
25 | OIL SEAL | $10.67 |
Out of Stock | ||
26 | MOTOR HOUSING | $370.39 |
Out of Stock | ||
27 | OIL PLUG | $15.63 |
Out of Stock | ||
28 | EXHAUST DEFLECTOR | $19.22 |
Out of Stock | ||
29 | TAPPING SCREW PACK (2) | $4.31 |
Out of Stock | ||
30 | TWIN CAGE | $414.23 |
Out of Stock | ||
31 | TWIN HAMMER PACK (2) | $314.04 |
In Stock (Only 1 left) | ||
32 | TWIN HAMMER PIN PACK (SET OF 2) | $88.24 |
Out of Stock | ||
33 | ANVIL | $349.51 |
Out of Stock | ||
36 | ANVIL SPACER | $56.90 |
Out of Stock | ||
37 | O-RING | $3.37 |
Out of Stock | ||
38 | SNAP RING | $8.37 |
Out of Stock | ||
39 | ANVIL BUSHING | $82.06 |
Out of Stock | ||
40 | O-RING | $16.80 |
Out of Stock | ||
41 | CLUTCH CASE ASSY w/BUSHING | $469.27 |
Out of Stock | ||
42 | CAP SCREW w/WASHER | $10.48 |
Out of Stock | ||
43 | HANDLE BAND | $62.52 |
Out of Stock | ||
44 | SIDE HANDLE | $161.57 |
Out of Stock | ||
45 | ANVIL COLLAR | $50.73 |
Out of Stock | ||
46 | OIL SEAL | $11.57 |
Out of Stock | ||
– | MOTOR HOUSING ASSY | $993.45 |
Out of Stock | ||
– | STANDARD ANVIL & CLUTCH ASSY | $885.28 |
Out of Stock | ||
– | CLUTCH CASE SUPPORT | $33.30 |
Out of Stock | ||
– | NOSE ASSY | $521.77 |
Out of Stock | ||
Model #IM1800
BrandSnap-on
Tool Type1" Impact Wrench
Powered ByAir
Weight15 lbs. / 6.8 kg
We Service? Yes Submit Order
No accessories found for this tool model.
Warranty
Warranty Duration: Unknown
Documentation
Replacement Parts
| Ref # | Part | Price |
|---|---|---|
1 | THROTTLE HANDLE | $411.82 |
Out of Stock | ||
2 | O-RING | $4.51 |
Out of Stock | ||
3 | VALVE PIN | $26.99 |
Out of Stock | ||
4 | VALVE BALL | $33.23 |
In Stock (Only 1 left) | ||
5 | THROTTLE SPRING | $4.93 |
Out of Stock | ||
6 | O-RING | $4.66 |
Out of Stock | ||
7 | HOSE ADAPTER | $31.58 |
Out of Stock | ||
8 | O-RINGS (SET OF 2) | $7.66 |
In Stock (Only 2 left) | ||
9 | REVERSE REGULATOR | $56.90 |
Out of Stock | ||
10 | REVERSE LEVER | $31.73 |
Out of Stock | ||
11 | CAP SCREW | $7.97 |
Out of Stock | ||
12 | ROLL PINS (SET OF 2) | $10.62 |
Out of Stock | ||
13 | THROTTLE TRIGGER (INSIDE) | $13.91 |
Out of Stock | ||
14 | HANDLE GRIP | $25.57 |
Out of Stock | ||
15 | CAP SCREWS w/WASHERS (SET OF 8) | $35.57 |
Out of Stock | ||
16 | GASKET | $19.79 |
In Stock (Only 1 left) | ||
17 | BALL BEARINGS (SET OF 2) | $73.93 |
Out of Stock | ||
18 | REAR PLATE | $78.24 |
Out of Stock | ||
19 | ROTOR BLADES (SET OF 6) | $107.30 |
Out of Stock | ||
20 | ROTOR | $288.94 |
Out of Stock | ||
21 | CYLINDER | $232.53 |
Out of Stock | ||
22 | GUIDE PIN | $15.16 |
Out of Stock | ||
23 | FRONT PLATE | $90.54 |
Out of Stock | ||
24 | O-RING | $14.38 |
Out of Stock | ||
25 | OIL SEAL | $10.67 |
Out of Stock | ||
26 | MOTOR HOUSING | $370.39 |
Out of Stock | ||
27 | OIL PLUG | $15.63 |
Out of Stock | ||
28 | EXHAUST DEFLECTOR | $19.22 |
Out of Stock | ||
29 | TAPPING SCREW PACK (2) | $4.31 |
Out of Stock | ||
30 | TWIN CAGE | $414.23 |
Out of Stock | ||
31 | TWIN HAMMER PACK (2) | $314.04 |
In Stock (Only 1 left) | ||
32 | TWIN HAMMER PIN PACK (SET OF 2) | $88.24 |
Out of Stock | ||
33 | ANVIL | $349.51 |
Out of Stock | ||
36 | ANVIL SPACER | $56.90 |
Out of Stock | ||
37 | O-RING | $3.37 |
Out of Stock | ||
38 | SNAP RING | $8.37 |
Out of Stock | ||
39 | ANVIL BUSHING | $82.06 |
Out of Stock | ||
40 | O-RING | $16.80 |
Out of Stock | ||
41 | CLUTCH CASE ASSY w/BUSHING | $469.27 |
Out of Stock | ||
42 | CAP SCREW w/WASHER | $10.48 |
Out of Stock | ||
43 | HANDLE BAND | $62.52 |
Out of Stock | ||
44 | SIDE HANDLE | $161.57 |
Out of Stock | ||
45 | ANVIL COLLAR | $50.73 |
Out of Stock | ||
46 | OIL SEAL | $11.57 |
Out of Stock | ||
– | MOTOR HOUSING ASSY | $993.45 |
Out of Stock | ||
– | STANDARD ANVIL & CLUTCH ASSY | $885.28 |
Out of Stock | ||
– | CLUTCH CASE SUPPORT | $33.30 |
Out of Stock | ||
– | NOSE ASSY | $521.77 |
Out of Stock | ||
Details
Model #IM1800
BrandSnap-on
Tool Type1" Impact Wrench
Powered ByAir
Weight15 lbs. / 6.8 kg
We Service? Yes Submit Order
Accessories
No accessories found for this tool model.
Warranty & Documentation
Warranty
Warranty Duration: Unknown