Snap-on MG31
Snap-on MG31
This tool is unavailable for purchase, but replacement parts may be available below.
3/8" Drive Air Impact Wrench
This product has been discontinued with limited quantity available.
Replacement Parts
Details
Accessories
Warranty & Documentation
| Ref # | Part | Price |
|---|---|---|
1 | SEAL | $5.27 |
Out of Stock | ||
2 | HOUSING | $182.64 |
Out of Stock | ||
2A | GRIP | $8.31 |
Out of Stock | ||
2B | IMPACT NOSE BUSHING | $8.31 |
Out of Stock | ||
3 | ANVIL | $98.31 |
Out of Stock | ||
3B | 3/8" ANVIL CLIP | $3.80 |
Out of Stock | ||
4 | PIN | $5.06 |
Out of Stock | ||
5 | HAMMER | $30.58 |
Out of Stock | ||
6 | FRAME | $121.82 |
Out of Stock | ||
8 | O-RING | $1.98 |
Out of Stock | ||
9 | FRONT END PLATE | $12.96 |
Out of Stock | ||
10 | OIL SEAL | $2.81 |
Out of Stock | ||
11 | WEAR PLATE | $4.98 |
Out of Stock | ||
12 | LINER | $54.72 |
Out of Stock | ||
13 | ROTOR BLADES (SET OF 8) | $27.97 |
In Stock (Only 1 left) | ||
14 | ROTOR | $87.21 |
Out of Stock | ||
15 | PIN | $2.84 |
Out of Stock | ||
17 | RUBBER O-RING | $1.57 |
In Stock | ||
18 | DETENT PIN | $5.27 |
Out of Stock | ||
19 | REVERSE VALVE | $16.51 |
Out of Stock | ||
20 | GASKET | $2.72 |
In Stock (Only 7 left) | ||
21 | GASKET | $2.60 |
In Stock (Only 2 left) | ||
22 | END CAP | $42.78 |
Out of Stock | ||
22B | BEARING | $10.30 |
In Stock (Only 6 left) | ||
23 | REGULATOR KNOB | $2.72 |
Out of Stock | ||
24 | BUTTONHEAD TORX SCREW 1032-3/4" | $5.26 |
Out of Stock | ||
25 | SCREW | $2.38 |
Out of Stock | ||
26 | TRIGGER | $15.38 |
Out of Stock | ||
27 | SEAT | $4.05 |
In Stock (Only 5 left) | ||
28 | TRIGGER VALVE | $7.23 |
In Stock (Only 6 left) | ||
29 | TRIGGER SPRING | $3.51 |
In Stock (Only 7 left) | ||
30 | GRIP | $17.28 |
Out of Stock | ||
31 | INLET BUSHING - INCL. AP | $19.49 |
Out of Stock | ||
32 | BOOT | $19.92 |
Out of Stock | ||
Model #MG31
BrandSnap-on
Tool Type3/8" Impact Wrench
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? No
Warranty
Warranty Duration: Unknown
Documentation
Replacement Parts
| Ref # | Part | Price |
|---|---|---|
1 | SEAL | $5.27 |
Out of Stock | ||
2 | HOUSING | $182.64 |
Out of Stock | ||
2A | GRIP | $8.31 |
Out of Stock | ||
2B | IMPACT NOSE BUSHING | $8.31 |
Out of Stock | ||
3 | ANVIL | $98.31 |
Out of Stock | ||
3B | 3/8" ANVIL CLIP | $3.80 |
Out of Stock | ||
4 | PIN | $5.06 |
Out of Stock | ||
5 | HAMMER | $30.58 |
Out of Stock | ||
6 | FRAME | $121.82 |
Out of Stock | ||
8 | O-RING | $1.98 |
Out of Stock | ||
9 | FRONT END PLATE | $12.96 |
Out of Stock | ||
10 | OIL SEAL | $2.81 |
Out of Stock | ||
11 | WEAR PLATE | $4.98 |
Out of Stock | ||
12 | LINER | $54.72 |
Out of Stock | ||
13 | ROTOR BLADES (SET OF 8) | $27.97 |
In Stock (Only 1 left) | ||
14 | ROTOR | $87.21 |
Out of Stock | ||
15 | PIN | $2.84 |
Out of Stock | ||
17 | RUBBER O-RING | $1.57 |
In Stock | ||
18 | DETENT PIN | $5.27 |
Out of Stock | ||
19 | REVERSE VALVE | $16.51 |
Out of Stock | ||
20 | GASKET | $2.72 |
In Stock (Only 7 left) | ||
21 | GASKET | $2.60 |
In Stock (Only 2 left) | ||
22 | END CAP | $42.78 |
Out of Stock | ||
22B | BEARING | $10.30 |
In Stock (Only 6 left) | ||
23 | REGULATOR KNOB | $2.72 |
Out of Stock | ||
24 | BUTTONHEAD TORX SCREW 1032-3/4" | $5.26 |
Out of Stock | ||
25 | SCREW | $2.38 |
Out of Stock | ||
26 | TRIGGER | $15.38 |
Out of Stock | ||
27 | SEAT | $4.05 |
In Stock (Only 5 left) | ||
28 | TRIGGER VALVE | $7.23 |
In Stock (Only 6 left) | ||
29 | TRIGGER SPRING | $3.51 |
In Stock (Only 7 left) | ||
30 | GRIP | $17.28 |
Out of Stock | ||
31 | INLET BUSHING - INCL. AP | $19.49 |
Out of Stock | ||
32 | BOOT | $19.92 |
Out of Stock | ||
Details
Model #MG31
BrandSnap-on
Tool Type3/8" Impact Wrench
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? No
Accessories
Warranty & Documentation
Warranty
Warranty Duration: Unknown