Sunex Tools SX5206
Sunex Tools SX5206
This tool is unavailable for purchase, but replacement parts may be available below.
1/4" Angle Air Die Grinder
Replacement Parts
Details
Accessories
Warranty & Documentation
| Ref # | Part | Price |
|---|---|---|
8 | RUBBER O-RING | $4.00 |
Out of Stock | ||
9 | AIR INLET | $5.00 |
Out of Stock | ||
10 | EXHAUST SLEEVE | $4.00 |
Out of Stock | ||
11 | RUBBER O-RING | $4.00 |
Out of Stock | ||
12 | SOLID ROLL PIN/SPRING PIN/THROTTLE LEVER PIN (3x24L) | $4.00 |
Out of Stock | ||
13 | LEVER | $6.46 |
Out of Stock | ||
14 | PROTECTING RUBBER (GRIP) | $14.14 |
Out of Stock | ||
15 | HOUSING | $21.34 |
Out of Stock | ||
16 | BALL BEARING | $6.94 |
Out of Stock | ||
17 | END PLATE FOR ANGLE DIE GRINDER/SANDER | $4.00 |
Out of Stock | ||
18 | PIN {PINSTRIPE REMOVAL} {ANGLE DIE GRINDER/NIBBLER} | $4.00 |
Out of Stock | ||
19 | ROTOR BLADE (SINGLE) | $4.00 |
Out of Stock | ||
20 | ROTOR {CAT530RXL} | $19.00 |
Out of Stock | ||
21 | CYLINDER | $18.80 |
Out of Stock | ||
23 | BEARING SPACER FOR GRINDER | $4.00 |
Out of Stock | ||
24 | FRONT PLATE | $11.34 |
Out of Stock | ||
25 | BALL BEARING | $6.34 |
Out of Stock | ||
26 | PINION GEAR | $14.34 |
In Stock (Only 4 left) | ||
27 | NUT - FOR GRINDER | $4.00 |
In Stock (Only 2 left) | ||
28 | CLAMP NUT | $10.46 |
Out of Stock | ||
29 | ANGLE HOUSING w/OIL CUP | $10.80 |
Out of Stock | ||
30 | GREASE FITTING | $4.00 |
In Stock (Only 7 left) | ||
31 | BEVEL GEAR | $14.34 |
In Stock (Only 8 left) | ||
32 | BALL BEARING (6000ZZ) | $15.46 |
Out of Stock | ||
33 | SPINDLE | $11.74 |
Out of Stock | ||
33A | SNAP RING FOR GRINDER | $4.00 |
Out of Stock | ||
34 | CLAMP NUT/ANGLE HOUSING NUT FOR GRINDER | $5.20 |
Out of Stock | ||
35 | 1/4" COLLET | $7.40 |
Out of Stock | ||
36 | 1/4" COLLET NUT - Straight | $6.20 |
In Stock (Only 9 left) | ||
37 | KEY | $4.00 |
Out of Stock | ||
38 | SPANNER WRENCH (14 mm) | $4.00 |
Out of Stock | ||
39 | SPANNER WRENCH (19 mm) | $5.74 |
Out of Stock | ||
40 | MUFFLER BODY | $4.00 |
Out of Stock | ||
41 | STAINLESS MESH | $4.00 |
In Stock (Only 1 left) | ||
42 | SILENCER | $4.00 |
Out of Stock | ||
43 | MUFFLER | $4.00 |
Out of Stock | ||
44 | SILENCER | $4.00 |
Out of Stock | ||
45 | REGULATOR | $4.00 |
Out of Stock | ||
46 | RUBBER O-RING | $4.00 |
Out of Stock | ||
47 | RUBBER O-RING | $4.00 |
Out of Stock | ||
48 | EXTERNAL SNAP RING | $4.00 |
Out of Stock | ||
49 | THROTTLE STEM | $4.00 |
Out of Stock | ||
50 | SPRING | $4.00 |
Out of Stock | ||
51 | VALVE | $4.00 |
Out of Stock | ||
52 | WASHER | $4.00 |
Out of Stock | ||
Model #SX5206
BrandSunex Tools
Tool TypeRight Angle Die Grinder
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes Submit Order
Ingersoll-Rand IR03A-MEDPD
3" MEDIUM ROLOC 1/4" MANDREL
$15.00
In Stock (Only 5 left)
Ingersoll-Rand IR02A-MEDPD
2" MEDIUM ROLOC 1/4" MANDREL
$14.00
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-MEDBR
2" SURFACE PREP MEDIUM - DISC
$2.50
In Stock
Ingersoll-Rand IR02A-CRSBS-4
2" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$38.40
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-CRSB
2" COARSE QUICK-STRIP KIT - 3 DISCS W/BACKING PAD & POST
$26.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-240AO-25
3" AO SERIES SANDING DISC - 240 GRIT
$34.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-MEDBR-25
3" MEDIUM ROLL LOC BROWN
$68.10
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR015A-240AO
1.5" AO SERIES SANDING DISC - 240 GRIT
$1.68
In Stock
Ingersoll-Rand IR03A-CRSBS-4
3" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$43.00
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-120AO
2" AO SERIES SANDING DISC - 120 GRIT
$1.68
In Stock
Warranty
Warranty Duration: 2 Years
Documentation
Replacement Parts
| Ref # | Part | Price |
|---|---|---|
8 | RUBBER O-RING | $4.00 |
Out of Stock | ||
9 | AIR INLET | $5.00 |
Out of Stock | ||
10 | EXHAUST SLEEVE | $4.00 |
Out of Stock | ||
11 | RUBBER O-RING | $4.00 |
Out of Stock | ||
12 | SOLID ROLL PIN/SPRING PIN/THROTTLE LEVER PIN (3x24L) | $4.00 |
Out of Stock | ||
13 | LEVER | $6.46 |
Out of Stock | ||
14 | PROTECTING RUBBER (GRIP) | $14.14 |
Out of Stock | ||
15 | HOUSING | $21.34 |
Out of Stock | ||
16 | BALL BEARING | $6.94 |
Out of Stock | ||
17 | END PLATE FOR ANGLE DIE GRINDER/SANDER | $4.00 |
Out of Stock | ||
18 | PIN {PINSTRIPE REMOVAL} {ANGLE DIE GRINDER/NIBBLER} | $4.00 |
Out of Stock | ||
19 | ROTOR BLADE (SINGLE) | $4.00 |
Out of Stock | ||
20 | ROTOR {CAT530RXL} | $19.00 |
Out of Stock | ||
21 | CYLINDER | $18.80 |
Out of Stock | ||
23 | BEARING SPACER FOR GRINDER | $4.00 |
Out of Stock | ||
24 | FRONT PLATE | $11.34 |
Out of Stock | ||
25 | BALL BEARING | $6.34 |
Out of Stock | ||
26 | PINION GEAR | $14.34 |
In Stock (Only 4 left) | ||
27 | NUT - FOR GRINDER | $4.00 |
In Stock (Only 2 left) | ||
28 | CLAMP NUT | $10.46 |
Out of Stock | ||
29 | ANGLE HOUSING w/OIL CUP | $10.80 |
Out of Stock | ||
30 | GREASE FITTING | $4.00 |
In Stock (Only 7 left) | ||
31 | BEVEL GEAR | $14.34 |
In Stock (Only 8 left) | ||
32 | BALL BEARING (6000ZZ) | $15.46 |
Out of Stock | ||
33 | SPINDLE | $11.74 |
Out of Stock | ||
33A | SNAP RING FOR GRINDER | $4.00 |
Out of Stock | ||
34 | CLAMP NUT/ANGLE HOUSING NUT FOR GRINDER | $5.20 |
Out of Stock | ||
35 | 1/4" COLLET | $7.40 |
Out of Stock | ||
36 | 1/4" COLLET NUT - Straight | $6.20 |
In Stock (Only 9 left) | ||
37 | KEY | $4.00 |
Out of Stock | ||
38 | SPANNER WRENCH (14 mm) | $4.00 |
Out of Stock | ||
39 | SPANNER WRENCH (19 mm) | $5.74 |
Out of Stock | ||
40 | MUFFLER BODY | $4.00 |
Out of Stock | ||
41 | STAINLESS MESH | $4.00 |
In Stock (Only 1 left) | ||
42 | SILENCER | $4.00 |
Out of Stock | ||
43 | MUFFLER | $4.00 |
Out of Stock | ||
44 | SILENCER | $4.00 |
Out of Stock | ||
45 | REGULATOR | $4.00 |
Out of Stock | ||
46 | RUBBER O-RING | $4.00 |
Out of Stock | ||
47 | RUBBER O-RING | $4.00 |
Out of Stock | ||
48 | EXTERNAL SNAP RING | $4.00 |
Out of Stock | ||
49 | THROTTLE STEM | $4.00 |
Out of Stock | ||
50 | SPRING | $4.00 |
Out of Stock | ||
51 | VALVE | $4.00 |
Out of Stock | ||
52 | WASHER | $4.00 |
Out of Stock | ||
Details
Model #SX5206
BrandSunex Tools
Tool TypeRight Angle Die Grinder
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes Submit Order
Accessories
Ingersoll-Rand IR03A-MEDPD
3" MEDIUM ROLOC 1/4" MANDREL
$15.00
In Stock (Only 5 left)
Ingersoll-Rand IR02A-MEDPD
2" MEDIUM ROLOC 1/4" MANDREL
$14.00
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-MEDBR
2" SURFACE PREP MEDIUM - DISC
$2.50
In Stock
Ingersoll-Rand IR02A-CRSBS-4
2" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$38.40
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-CRSB
2" COARSE QUICK-STRIP KIT - 3 DISCS W/BACKING PAD & POST
$26.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-240AO-25
3" AO SERIES SANDING DISC - 240 GRIT
$34.20
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR03A-MEDBR-25
3" MEDIUM ROLL LOC BROWN
$68.10
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR015A-240AO
1.5" AO SERIES SANDING DISC - 240 GRIT
$1.68
In Stock
Ingersoll-Rand IR03A-CRSBS-4
3" COARSE QUICK-STRIP KIT - 3 DISCS w/BACKING PAD & POST
$43.00
Out of Stock Lead Time: 14 days
Ingersoll-Rand IR02A-120AO
2" AO SERIES SANDING DISC - 120 GRIT
$1.68
In Stock
Warranty & Documentation
Warranty
Warranty Duration: 2 Years