Ingersoll-Rand IR231
Ingersoll-Rand IR231
This tool is unavailable for purchase, but replacement parts may be available below.
1/2" Drive Air Impact Wrench
This tool has been replaced by IR231C.
This product has been discontinued with limited quantity available.
Replacement Parts
Details
Accessories
Warranty & Documentation
| Ref # | Part | Price |
|---|---|---|
* | BOOT | $19.00 |
Out of Stock | ||
* | TUNE-UP KIT | $35.68 |
Out of Stock | ||
* | TUNE-UP KIT w/BEARINGS | $46.29 |
In Stock (Only 1 left) | ||
* | BOOT | $8.42 |
In Stock | ||
2 | LABEL | $5.51 |
Out of Stock | ||
3 | GREASE FITTING | $6.61 |
Out of Stock | ||
4 | BUSHING | $46.29 |
Out of Stock | ||
5 | SEAL | $4.40 |
Out of Stock | ||
6 | VALVE | $4.95 |
Out of Stock | ||
7 | O-RING | $4.40 |
In Stock | ||
8 | SPRING | $1.50 |
Out of Stock | ||
9 | THROTTLE VALVE STEM | $7.71 |
Out of Stock | ||
10 | BODY | $16.53 |
Out of Stock | ||
11 | TRIGGER | $7.16 |
Out of Stock | ||
12 | PIN | $5.51 |
In Stock (Only 1 left) | ||
13 | VALVE | $36.37 |
Out of Stock | ||
14 | STEEL BALL | $3.68 |
Out of Stock | ||
15 | SPRING | $3.85 |
In Stock (Only 9 left) | ||
16 | REVERSE VALVE KNOB | $3.85 |
Out of Stock | ||
17 | SCREW | $2.20 |
In Stock (Only 5 left) | ||
18 | NAMEPLATE | $3.52 |
Out of Stock | ||
22 | ROTOR | $50.70 |
In Stock (Only 5 left) | ||
23 | BEARING | $15.43 |
Out of Stock | ||
24 | BEARING | $15.43 |
Out of Stock | ||
25 | RING | $4.40 |
In Stock | ||
26 | CYLINDER | $82.66 |
Out of Stock | ||
27 | DOWEL | $4.40 |
Out of Stock | ||
29 | ROTOR BLADES (SET OF 6) | $32.60 |
In Stock | ||
30 | FRONT END PLATE | $11.02 |
In Stock | ||
31 | REAR END PLATE | $9.36 |
In Stock | ||
32 | GASKET | $4.95 |
In Stock | ||
33 | WASHER | $6.61 |
Out of Stock | ||
34 | HAMMER FRAME | $31.64 |
In Stock | ||
35 | PIN | $6.61 |
In Stock | ||
36 | CASE ASSY | $93.68 |
Out of Stock | ||
37 | HAMMER | $15.26 |
In Stock | ||
38 | GASKET | $3.85 |
In Stock | ||
39A | PILOT | $4.95 |
In Stock (Only 1 left) | ||
40 | BUSHING | $11.02 |
Out of Stock | ||
41 | SCREW | $1.50 |
In Stock (Only 1 left) | ||
43 | 1/2" ANVIL w/SMALL BACK END FOR IR231 1/2" DRIVE AIR IMPACT WRENCH | $40.55 |
In Stock | ||
44 | 1/2" ANVIL CLIP KIT (10 PK) | $13.15 |
In Stock | ||
44 | ANVIL CLIP | $3.85 |
In Stock (Only 5 left) | ||
45 | RUBBER O-RING | $4.40 |
Out of Stock | ||
– | PLUG | $4.40 |
Out of Stock | ||
– | SCREEN | $2.54 |
In Stock (Only 2 left) | ||
– | ADJ SCREW | $7.71 |
Out of Stock | ||
– | OILER FELT | $2.33 |
In Stock | ||
– | PLUG (49843-119) | $7.16 |
Out of Stock | ||
Model #IR231
BrandIngersoll-Rand
Tool Type1/2" Impact Wrench
Powered ByAir
Weight6 lbs. / 2.72 kg
We Service? Yes Submit Order
Warranty
Warranty Duration: 1 Year
Documentation
Replacement Parts
| Ref # | Part | Price |
|---|---|---|
* | BOOT | $19.00 |
Out of Stock | ||
* | TUNE-UP KIT | $35.68 |
Out of Stock | ||
* | TUNE-UP KIT w/BEARINGS | $46.29 |
In Stock (Only 1 left) | ||
* | BOOT | $8.42 |
In Stock | ||
2 | LABEL | $5.51 |
Out of Stock | ||
3 | GREASE FITTING | $6.61 |
Out of Stock | ||
4 | BUSHING | $46.29 |
Out of Stock | ||
5 | SEAL | $4.40 |
Out of Stock | ||
6 | VALVE | $4.95 |
Out of Stock | ||
7 | O-RING | $4.40 |
In Stock | ||
8 | SPRING | $1.50 |
Out of Stock | ||
9 | THROTTLE VALVE STEM | $7.71 |
Out of Stock | ||
10 | BODY | $16.53 |
Out of Stock | ||
11 | TRIGGER | $7.16 |
Out of Stock | ||
12 | PIN | $5.51 |
In Stock (Only 1 left) | ||
13 | VALVE | $36.37 |
Out of Stock | ||
14 | STEEL BALL | $3.68 |
Out of Stock | ||
15 | SPRING | $3.85 |
In Stock (Only 9 left) | ||
16 | REVERSE VALVE KNOB | $3.85 |
Out of Stock | ||
17 | SCREW | $2.20 |
In Stock (Only 5 left) | ||
18 | NAMEPLATE | $3.52 |
Out of Stock | ||
22 | ROTOR | $50.70 |
In Stock (Only 5 left) | ||
23 | BEARING | $15.43 |
Out of Stock | ||
24 | BEARING | $15.43 |
Out of Stock | ||
25 | RING | $4.40 |
In Stock | ||
26 | CYLINDER | $82.66 |
Out of Stock | ||
27 | DOWEL | $4.40 |
Out of Stock | ||
29 | ROTOR BLADES (SET OF 6) | $32.60 |
In Stock | ||
30 | FRONT END PLATE | $11.02 |
In Stock | ||
31 | REAR END PLATE | $9.36 |
In Stock | ||
32 | GASKET | $4.95 |
In Stock | ||
33 | WASHER | $6.61 |
Out of Stock | ||
34 | HAMMER FRAME | $31.64 |
In Stock | ||
35 | PIN | $6.61 |
In Stock | ||
36 | CASE ASSY | $93.68 |
Out of Stock | ||
37 | HAMMER | $15.26 |
In Stock | ||
38 | GASKET | $3.85 |
In Stock | ||
39A | PILOT | $4.95 |
In Stock (Only 1 left) | ||
40 | BUSHING | $11.02 |
Out of Stock | ||
41 | SCREW | $1.50 |
In Stock (Only 1 left) | ||
43 | 1/2" ANVIL w/SMALL BACK END FOR IR231 1/2" DRIVE AIR IMPACT WRENCH | $40.55 |
In Stock | ||
44 | 1/2" ANVIL CLIP KIT (10 PK) | $13.15 |
In Stock | ||
44 | ANVIL CLIP | $3.85 |
In Stock (Only 5 left) | ||
45 | RUBBER O-RING | $4.40 |
Out of Stock | ||
– | PLUG | $4.40 |
Out of Stock | ||
– | SCREEN | $2.54 |
In Stock (Only 2 left) | ||
– | ADJ SCREW | $7.71 |
Out of Stock | ||
– | OILER FELT | $2.33 |
In Stock | ||
– | PLUG (49843-119) | $7.16 |
Out of Stock | ||
Details
Model #IR231
BrandIngersoll-Rand
Tool Type1/2" Impact Wrench
Powered ByAir
Weight6 lbs. / 2.72 kg
We Service? Yes Submit Order
Accessories
Warranty & Documentation
Warranty
Warranty Duration: 1 Year