Ingersoll-Rand IR280
Ingersoll-Rand IR280
This tool is unavailable for purchase, but replacement parts may be available below.
1" Drive Air Impact Wrench
Replacement Parts
Details
Accessories
Warranty & Documentation
| Ref # | Part | Price |
|---|---|---|
0 | 1" IMPACT WRENCH | $3,555.00 |
Out of Stock | ||
1 | HANDLE | $507.01 |
Out of Stock | ||
2 | GREASE FITTING | $6.61 |
In Stock (Only 4 left) | ||
5 | INSIDE TRIGGER | $22.04 |
Out of Stock | ||
6 | PIN | $4.40 |
In Stock (Only 3 left) | ||
7 | THROTTLE VALVE PLUNGER | $33.06 |
Out of Stock | ||
8 | THROTTLE VALVE ASSY | $126.75 |
Out of Stock | ||
9 | THROTTLE VALVE FACE | $4.40 |
Out of Stock | ||
10 | SPRING | $9.25 |
In Stock | ||
11 | STRAIGHT INLET | $71.64 |
Out of Stock | ||
12 | AIR STRAINER SCREEN | $8.81 |
Out of Stock | ||
13 | O-Ring | $4.40 |
Out of Stock | ||
15 | HOUSING COVER GASKET | $11.02 |
In Stock (Only 4 left) | ||
16 | MOTOR CLAMP WASHER | $66.13 |
Out of Stock | ||
17 | REAR END PLATE | $220.44 |
Out of Stock | ||
18 | BEARING | $16.53 |
Out of Stock | ||
19 | ROTOR | $573.14 |
Out of Stock | ||
20 | ROTOR BLADES (SET OF 6) | $88.17 |
In Stock (Only 4 left) | ||
21 | CYLINDER | $567.63 |
Out of Stock | ||
22 | FRONT END PLATE | $209.41 |
Out of Stock | ||
23 | BEARING | $26.45 |
Out of Stock | ||
24 | CYLINDER DOWEL | $14.32 |
Out of Stock | ||
25 | HOUSING | $925.84 |
Out of Stock | ||
26 | REVERSE VALVE BUSH | $181.86 |
Out of Stock | ||
27 | AIR PORT GASKET | $7.68 |
Out of Stock | ||
28 | AIR PORT GASKET RET. | $4.40 |
In Stock | ||
29 | REVERSE LEVER | $22.04 |
Out of Stock | ||
30 | PLUNGER | $12.12 |
In Stock (Only 3 left) | ||
31 | SPRING | $1.50 |
In Stock | ||
32 | REVERSE VALVE ASSY | $198.39 |
Out of Stock | ||
33 | SEAL | $4.95 |
Out of Stock | ||
34 | HAMMER CASE ASSY | $666.83 |
Out of Stock | ||
35 | HAMMER CASE BUSHING | $42.98 |
Out of Stock | ||
35A | LABEL | $5.51 |
Out of Stock | ||
36 | HAMMER CASE GASKET | $7.16 |
In Stock (Only 2 left) | ||
37 | SCREWS (SET OF 4) | $15.43 |
Out of Stock | ||
38 | WASHER | $1.50 |
In Stock | ||
39 | SCREW | $3.30 |
Out of Stock | ||
40 | WASHER | $1.50 |
Out of Stock | ||
41 | HAMMER FRAME ASSY | $484.96 |
Out of Stock | ||
42 | HAMMER PIN | $44.08 |
Out of Stock | ||
43 | HAMMER | $220.44 |
Out of Stock | ||
44 | SIDE SPADE HANDLE | $121.24 |
Out of Stock | ||
45 | MALE THREADED STUD FOR SIDE HANDLE | $56.21 |
Out of Stock | ||
46 | STUD NUT, SIDE HANDLE | $7.16 |
Out of Stock | ||
47 | BRACKET, SIDE HANDLE | $71.64 |
Out of Stock | ||
47A | HANGER SPACER | $8.81 |
In Stock (Only 1 left) | ||
48 | 1" SQUARE DRIVE ANVIL | $242.48 |
Out of Stock | ||
48 | 1" EXTENDED ANVIL - 6" (152mm) | $347.19 |
Out of Stock | ||
49 | 1" RETAINING RING | $12.00 |
Out of Stock | ||
50 | SPLINE DRIVE ANVIL | $672.34 |
Out of Stock | ||
50 | SPLINE DRIVE ANVIL - 6" | $569.33 |
Out of Stock | ||
51 | SPRING | $7.65 |
In Stock (Only 1 left) | ||
52 | BALL IND | $6.68 |
Out of Stock | ||
53 | RETAINING BALL PLUNGER | $99.19 |
Out of Stock | ||
54 | PLUNGER RETAINING PIN | $4.40 |
Out of Stock | ||
55 | EXHAUST DEFLECTOR | $51.25 |
Out of Stock | ||
56 | SCREW | $5.09 |
Out of Stock | ||
57 | DEAD HANDLE | $93.68 |
Out of Stock | ||
58 | HORIZONTAL HANGER | $132.26 |
Out of Stock | ||
59 | NAMEPLATE | $16.70 |
Out of Stock | ||
60 | NAMEPLATE SCREW | $5.43 |
Out of Stock | ||
62 | DEFLECTOR | $52.90 |
Out of Stock | ||
63 | DEFLECTOR | $42.98 |
Out of Stock | ||
64 | EXHAUST BAFFLE | $11.02 |
Out of Stock | ||
65 | GASKET | $4.40 |
Out of Stock | ||
66 | SILENCER | $8.81 |
In Stock (Only 4 left) | ||
67 | SCREW | $8.00 |
Out of Stock | ||
Model #IR280
BrandIngersoll-Rand
Tool Type1" Impact Wrench
Powered ByAir
Weight22 lbs. / 9.98 kg
We Service? Yes Submit Order
No accessories found for this tool model.
Warranty
Warranty Duration: 1 Year
Documentation
Replacement Parts
| Ref # | Part | Price |
|---|---|---|
0 | 1" IMPACT WRENCH | $3,555.00 |
Out of Stock | ||
1 | HANDLE | $507.01 |
Out of Stock | ||
2 | GREASE FITTING | $6.61 |
In Stock (Only 4 left) | ||
5 | INSIDE TRIGGER | $22.04 |
Out of Stock | ||
6 | PIN | $4.40 |
In Stock (Only 3 left) | ||
7 | THROTTLE VALVE PLUNGER | $33.06 |
Out of Stock | ||
8 | THROTTLE VALVE ASSY | $126.75 |
Out of Stock | ||
9 | THROTTLE VALVE FACE | $4.40 |
Out of Stock | ||
10 | SPRING | $9.25 |
In Stock | ||
11 | STRAIGHT INLET | $71.64 |
Out of Stock | ||
12 | AIR STRAINER SCREEN | $8.81 |
Out of Stock | ||
13 | O-Ring | $4.40 |
Out of Stock | ||
15 | HOUSING COVER GASKET | $11.02 |
In Stock (Only 4 left) | ||
16 | MOTOR CLAMP WASHER | $66.13 |
Out of Stock | ||
17 | REAR END PLATE | $220.44 |
Out of Stock | ||
18 | BEARING | $16.53 |
Out of Stock | ||
19 | ROTOR | $573.14 |
Out of Stock | ||
20 | ROTOR BLADES (SET OF 6) | $88.17 |
In Stock (Only 4 left) | ||
21 | CYLINDER | $567.63 |
Out of Stock | ||
22 | FRONT END PLATE | $209.41 |
Out of Stock | ||
23 | BEARING | $26.45 |
Out of Stock | ||
24 | CYLINDER DOWEL | $14.32 |
Out of Stock | ||
25 | HOUSING | $925.84 |
Out of Stock | ||
26 | REVERSE VALVE BUSH | $181.86 |
Out of Stock | ||
27 | AIR PORT GASKET | $7.68 |
Out of Stock | ||
28 | AIR PORT GASKET RET. | $4.40 |
In Stock | ||
29 | REVERSE LEVER | $22.04 |
Out of Stock | ||
30 | PLUNGER | $12.12 |
In Stock (Only 3 left) | ||
31 | SPRING | $1.50 |
In Stock | ||
32 | REVERSE VALVE ASSY | $198.39 |
Out of Stock | ||
33 | SEAL | $4.95 |
Out of Stock | ||
34 | HAMMER CASE ASSY | $666.83 |
Out of Stock | ||
35 | HAMMER CASE BUSHING | $42.98 |
Out of Stock | ||
35A | LABEL | $5.51 |
Out of Stock | ||
36 | HAMMER CASE GASKET | $7.16 |
In Stock (Only 2 left) | ||
37 | SCREWS (SET OF 4) | $15.43 |
Out of Stock | ||
38 | WASHER | $1.50 |
In Stock | ||
39 | SCREW | $3.30 |
Out of Stock | ||
40 | WASHER | $1.50 |
Out of Stock | ||
41 | HAMMER FRAME ASSY | $484.96 |
Out of Stock | ||
42 | HAMMER PIN | $44.08 |
Out of Stock | ||
43 | HAMMER | $220.44 |
Out of Stock | ||
44 | SIDE SPADE HANDLE | $121.24 |
Out of Stock | ||
45 | MALE THREADED STUD FOR SIDE HANDLE | $56.21 |
Out of Stock | ||
46 | STUD NUT, SIDE HANDLE | $7.16 |
Out of Stock | ||
47 | BRACKET, SIDE HANDLE | $71.64 |
Out of Stock | ||
47A | HANGER SPACER | $8.81 |
In Stock (Only 1 left) | ||
48 | 1" SQUARE DRIVE ANVIL | $242.48 |
Out of Stock | ||
48 | 1" EXTENDED ANVIL - 6" (152mm) | $347.19 |
Out of Stock | ||
49 | 1" RETAINING RING | $12.00 |
Out of Stock | ||
50 | SPLINE DRIVE ANVIL | $672.34 |
Out of Stock | ||
50 | SPLINE DRIVE ANVIL - 6" | $569.33 |
Out of Stock | ||
51 | SPRING | $7.65 |
In Stock (Only 1 left) | ||
52 | BALL IND | $6.68 |
Out of Stock | ||
53 | RETAINING BALL PLUNGER | $99.19 |
Out of Stock | ||
54 | PLUNGER RETAINING PIN | $4.40 |
Out of Stock | ||
55 | EXHAUST DEFLECTOR | $51.25 |
Out of Stock | ||
56 | SCREW | $5.09 |
Out of Stock | ||
57 | DEAD HANDLE | $93.68 |
Out of Stock | ||
58 | HORIZONTAL HANGER | $132.26 |
Out of Stock | ||
59 | NAMEPLATE | $16.70 |
Out of Stock | ||
60 | NAMEPLATE SCREW | $5.43 |
Out of Stock | ||
62 | DEFLECTOR | $52.90 |
Out of Stock | ||
63 | DEFLECTOR | $42.98 |
Out of Stock | ||
64 | EXHAUST BAFFLE | $11.02 |
Out of Stock | ||
65 | GASKET | $4.40 |
Out of Stock | ||
66 | SILENCER | $8.81 |
In Stock (Only 4 left) | ||
67 | SCREW | $8.00 |
Out of Stock | ||
Details
Model #IR280
BrandIngersoll-Rand
Tool Type1" Impact Wrench
Powered ByAir
Weight22 lbs. / 9.98 kg
We Service? Yes Submit Order
Accessories
No accessories found for this tool model.
Warranty & Documentation
Warranty
Warranty Duration: 1 Year