Cart (0 items)
The cart is empty
| Subtotal: * | $0.00 |
|---|
* Order total before shipping and taxes.
Ingersoll-Rand IR290
Ingersoll-Rand IR290
This tool is unavailable for purchase, but replacement parts may be available below.
1" Drive Air Impact Wrench
Replacement Parts
Details
Accessories
Warranty & Documentation
| Ref # | Part | Price |
|---|---|---|
0 | 1" IMPACT WRENCH | $3,775.00 |
Out of Stock | ||
1 | HOUSING | $1,188.41 |
Out of Stock | ||
2 | TRIGGER | $143.28 |
Out of Stock | ||
3 | SPRING | $1.85 |
Out of Stock | ||
4 | TRIGGER LOCK PIN | $4.40 |
Out of Stock | ||
5 | TRIGGER BUSHING | $77.82 |
Out of Stock | ||
6 | AIR PORT GASKET | $7.68 |
Out of Stock | ||
7 | AIR PORT GASKET RET. | $4.40 |
In Stock | ||
8 | THROTTLE VALVE ASSY | $126.75 |
Out of Stock | ||
9 | THROTTLE VALVE FACE | $4.40 |
Out of Stock | ||
10 | THROTTLE VALVE PLUNGER | $26.45 |
Out of Stock | ||
11 | SPRING | $9.25 |
In Stock | ||
12 | AIR STRAINER SCREEN | $8.81 |
Out of Stock | ||
13 | STRAIGHT INLET | $71.64 |
Out of Stock | ||
14 | REVERSE VALVE BUSHING | $74.95 |
Out of Stock | ||
15 | REVERSE VALVE ASSY | $242.48 |
Out of Stock | ||
16 | SEAL | $5.85 |
In Stock (Only 1 left) | ||
17 | REVERSE LEVER | $22.04 |
Out of Stock | ||
18 | PLUNGER | $12.12 |
In Stock (Only 3 left) | ||
19 | SPRING | $1.50 |
In Stock | ||
20 | POWER REGULATOR ASSY | $97.84 |
In Stock (Only 1 left) | ||
21 | RUBBER O-RING | $4.40 |
In Stock (Only 1 left) | ||
22 | STEEL BALL | $3.68 |
In Stock (Only 2 left) | ||
23 | WASHER | $1.50 |
Out of Stock | ||
24 | SCREW | $3.30 |
In Stock (Only 4 left) | ||
25 | COVER | $683.36 |
Out of Stock | ||
26 | OILER ADJUSTING SCREW | $2.73 |
In Stock (Only 2 left) | ||
27 | OILER FELT | $1.64 |
In Stock | ||
28 | GREASE FITTING | $6.61 |
In Stock (Only 3 left) | ||
29 | OIL CHAMBER PLUG | $1.64 |
Out of Stock | ||
30 | OIL CHAMBER PLUG GASKET | $2.73 |
In Stock (Only 3 left) | ||
31 | HOUSING COVER GASKET | $11.02 |
In Stock (Only 4 left) | ||
32 | MOTOR CLAMP WASHER | $66.13 |
Out of Stock | ||
33 | CYLINDER | $567.63 |
Out of Stock | ||
34 | CYLINDER DOWEL | $14.32 |
Out of Stock | ||
35 | BEARING | $16.53 |
Out of Stock | ||
36 | REAR END PLATE | $220.44 |
Out of Stock | ||
37 | ROTOR | $573.14 |
Out of Stock | ||
38 | ROTOR BLADES (SET OF 6) | $88.17 |
In Stock (Only 4 left) | ||
39 | FRONT END PLATE | $209.41 |
Out of Stock | ||
40 | BEARING | $26.45 |
Out of Stock | ||
41 | HAMMER CASE GASKET | $7.16 |
In Stock (Only 2 left) | ||
41A | DEAD HANDLE | $93.68 |
Out of Stock | ||
42 | SIDE SPADE HANDLE | $121.24 |
Out of Stock | ||
43 | MALE THREADED STUD FOR SIDE HANDLE | $56.21 |
Out of Stock | ||
44 | STUD NUT, SIDE HANDLE | $7.16 |
Out of Stock | ||
44A | BRACKET, SIDE HANDLE | $71.64 |
Out of Stock | ||
44B | HANGER SPACER | $8.81 |
In Stock (Only 1 left) | ||
45 | HAMMER FRAME ASSY | $484.96 |
Out of Stock | ||
46 | HAMMER PIN | $44.08 |
Out of Stock | ||
47 | HAMMER | $220.44 |
Out of Stock | ||
48 | 1" SQUARE DRIVE ANVIL | $242.48 |
Out of Stock | ||
49 | HAMMER CASE ASSY | $666.83 |
Out of Stock | ||
50 | HAMMER CASE BUSHING | $42.98 |
Out of Stock | ||
50A | LABEL | $5.51 |
Out of Stock | ||
51 | WASHER | $1.50 |
In Stock | ||
52 | SCREWS (SET OF 4) | $15.43 |
Out of Stock | ||
53 | 1" RETAINING RING | $12.00 |
Out of Stock | ||
53A | THREAD-ON MUFFLER | $104.70 |
Out of Stock | ||
54 | SPLINE DRIVE ANVIL | $672.34 |
Out of Stock | ||
55 | BALL IND | $6.68 |
Out of Stock | ||
56 | RETAINING BALL PLUNGER | $99.19 |
Out of Stock | ||
57 | SPRING | $7.65 |
In Stock (Only 1 left) | ||
58 | PLUNGER RETAINING PIN | $4.40 |
Out of Stock | ||
59 | HORIZONTAL HANGER | $132.26 |
Out of Stock | ||
60 | NAMEPLATE | $14.96 |
Out of Stock | ||
61 | NAMEPLATE SCREW | $5.43 |
Out of Stock | ||
Model #IR290
BrandIngersoll-Rand
Tool Type1" Impact Wrench
Powered ByAir
Weight22 lbs. / 9.98 kg
We Service? Yes Submit Order
No accessories found for this tool model.
Warranty
Warranty Duration: 2 Years
Documentation
Replacement Parts
| Ref # | Part | Price |
|---|---|---|
0 | 1" IMPACT WRENCH | $3,775.00 |
Out of Stock | ||
1 | HOUSING | $1,188.41 |
Out of Stock | ||
2 | TRIGGER | $143.28 |
Out of Stock | ||
3 | SPRING | $1.85 |
Out of Stock | ||
4 | TRIGGER LOCK PIN | $4.40 |
Out of Stock | ||
5 | TRIGGER BUSHING | $77.82 |
Out of Stock | ||
6 | AIR PORT GASKET | $7.68 |
Out of Stock | ||
7 | AIR PORT GASKET RET. | $4.40 |
In Stock | ||
8 | THROTTLE VALVE ASSY | $126.75 |
Out of Stock | ||
9 | THROTTLE VALVE FACE | $4.40 |
Out of Stock | ||
10 | THROTTLE VALVE PLUNGER | $26.45 |
Out of Stock | ||
11 | SPRING | $9.25 |
In Stock | ||
12 | AIR STRAINER SCREEN | $8.81 |
Out of Stock | ||
13 | STRAIGHT INLET | $71.64 |
Out of Stock | ||
14 | REVERSE VALVE BUSHING | $74.95 |
Out of Stock | ||
15 | REVERSE VALVE ASSY | $242.48 |
Out of Stock | ||
16 | SEAL | $5.85 |
In Stock (Only 1 left) | ||
17 | REVERSE LEVER | $22.04 |
Out of Stock | ||
18 | PLUNGER | $12.12 |
In Stock (Only 3 left) | ||
19 | SPRING | $1.50 |
In Stock | ||
20 | POWER REGULATOR ASSY | $97.84 |
In Stock (Only 1 left) | ||
21 | RUBBER O-RING | $4.40 |
In Stock (Only 1 left) | ||
22 | STEEL BALL | $3.68 |
In Stock (Only 2 left) | ||
23 | WASHER | $1.50 |
Out of Stock | ||
24 | SCREW | $3.30 |
In Stock (Only 4 left) | ||
25 | COVER | $683.36 |
Out of Stock | ||
26 | OILER ADJUSTING SCREW | $2.73 |
In Stock (Only 2 left) | ||
27 | OILER FELT | $1.64 |
In Stock | ||
28 | GREASE FITTING | $6.61 |
In Stock (Only 3 left) | ||
29 | OIL CHAMBER PLUG | $1.64 |
Out of Stock | ||
30 | OIL CHAMBER PLUG GASKET | $2.73 |
In Stock (Only 3 left) | ||
31 | HOUSING COVER GASKET | $11.02 |
In Stock (Only 4 left) | ||
32 | MOTOR CLAMP WASHER | $66.13 |
Out of Stock | ||
33 | CYLINDER | $567.63 |
Out of Stock | ||
34 | CYLINDER DOWEL | $14.32 |
Out of Stock | ||
35 | BEARING | $16.53 |
Out of Stock | ||
36 | REAR END PLATE | $220.44 |
Out of Stock | ||
37 | ROTOR | $573.14 |
Out of Stock | ||
38 | ROTOR BLADES (SET OF 6) | $88.17 |
In Stock (Only 4 left) | ||
39 | FRONT END PLATE | $209.41 |
Out of Stock | ||
40 | BEARING | $26.45 |
Out of Stock | ||
41 | HAMMER CASE GASKET | $7.16 |
In Stock (Only 2 left) | ||
41A | DEAD HANDLE | $93.68 |
Out of Stock | ||
42 | SIDE SPADE HANDLE | $121.24 |
Out of Stock | ||
43 | MALE THREADED STUD FOR SIDE HANDLE | $56.21 |
Out of Stock | ||
44 | STUD NUT, SIDE HANDLE | $7.16 |
Out of Stock | ||
44A | BRACKET, SIDE HANDLE | $71.64 |
Out of Stock | ||
44B | HANGER SPACER | $8.81 |
In Stock (Only 1 left) | ||
45 | HAMMER FRAME ASSY | $484.96 |
Out of Stock | ||
46 | HAMMER PIN | $44.08 |
Out of Stock | ||
47 | HAMMER | $220.44 |
Out of Stock | ||
48 | 1" SQUARE DRIVE ANVIL | $242.48 |
Out of Stock | ||
49 | HAMMER CASE ASSY | $666.83 |
Out of Stock | ||
50 | HAMMER CASE BUSHING | $42.98 |
Out of Stock | ||
50A | LABEL | $5.51 |
Out of Stock | ||
51 | WASHER | $1.50 |
In Stock | ||
52 | SCREWS (SET OF 4) | $15.43 |
Out of Stock | ||
53 | 1" RETAINING RING | $12.00 |
Out of Stock | ||
53A | THREAD-ON MUFFLER | $104.70 |
Out of Stock | ||
54 | SPLINE DRIVE ANVIL | $672.34 |
Out of Stock | ||
55 | BALL IND | $6.68 |
Out of Stock | ||
56 | RETAINING BALL PLUNGER | $99.19 |
Out of Stock | ||
57 | SPRING | $7.65 |
In Stock (Only 1 left) | ||
58 | PLUNGER RETAINING PIN | $4.40 |
Out of Stock | ||
59 | HORIZONTAL HANGER | $132.26 |
Out of Stock | ||
60 | NAMEPLATE | $14.96 |
Out of Stock | ||
61 | NAMEPLATE SCREW | $5.43 |
Out of Stock | ||
Details
Model #IR290
BrandIngersoll-Rand
Tool Type1" Impact Wrench
Powered ByAir
Weight22 lbs. / 9.98 kg
We Service? Yes Submit Order
Accessories
No accessories found for this tool model.
Warranty & Documentation
Warranty
Warranty Duration: 2 Years