Ingersoll-Rand IR290-6
Ingersoll-Rand IR290-6
This tool is unavailable for purchase, but replacement parts may be available below.
1" Drive Air Impact Wrench
This product is obsolete; part availability is limited.
Replacement Parts
Details
Accessories
Warranty & Documentation
| Ref # | Part | Price |
|---|---|---|
1 | HOUSING | $1,188.41 |
Out of Stock | ||
2 | TRIGGER | $134.87 |
Out of Stock | ||
3 | SPRING | $1.85 |
In Stock (Only 1 left) | ||
4 | TRIGGER LOCK PIN | $3.87 |
Out of Stock | ||
5 | TRIGGER BUSHING | $77.82 |
Out of Stock | ||
6 | AIR PORT GASKET | $7.68 |
In Stock | ||
7 | AIR PORT GASKET RET. | $3.87 |
In Stock | ||
8 | THROTTLE VALVE ASSY | $118.29 |
In Stock (Only 1 left) | ||
9 | THROTTLE VALVE FACE | $3.87 |
Out of Stock | ||
10 | THROTTLE VALVE PLUNGER | $25.09 |
Out of Stock | ||
11 | SPRING | $9.25 |
In Stock | ||
12 | AIR STRAINER SCREEN | $7.40 |
Out of Stock | ||
13 | STRAIGHT INLET | $66.45 |
Out of Stock | ||
14 | REVERSE VALVE BUSHING | $74.95 |
Out of Stock | ||
15 | REVERSE VALVE ASSY | $228.84 |
Out of Stock | ||
16 | SEAL | $4.30 |
In Stock (Only 1 left) | ||
17 | REVERSE LEVER | $20.12 |
Out of Stock | ||
18 | PLUNGER | $11.39 |
In Stock (Only 5 left) | ||
19 | SPRING | $1.50 |
In Stock | ||
20 | POWER REGULATOR ASSY | $97.84 |
In Stock (Only 1 left) | ||
21 | RUBBER O-RING | $3.87 |
Out of Stock | ||
22 | STEEL BALL | $3.68 |
Out of Stock | ||
23 | WASHER | $1.50 |
Out of Stock | ||
24 | SCREW | $1.50 |
Out of Stock | ||
25 | COVER | $655.56 |
Out of Stock | ||
26 | OILER ADJUSTING SCREW | $2.73 |
In Stock (Only 2 left) | ||
27 | OILER FELT | $1.64 |
In Stock | ||
28 | GREASE FITTING | $5.73 |
Out of Stock | ||
29 | OIL CHAMBER PLUG | $1.64 |
Out of Stock | ||
30 | OIL CHAMBER PLUG GASKET | $2.73 |
In Stock (Only 3 left) | ||
31 | HOUSING COVER GASKET | $10.25 |
In Stock (Only 1 left) | ||
32 | MOTOR CLAMP WASHER | $60.25 |
Out of Stock | ||
33 | CYLINDER | $543.91 |
Out of Stock | ||
34 | CYLINDER DOWEL | $12.60 |
Out of Stock | ||
35 | BEARING | $15.14 |
Out of Stock | ||
36 | REAR END PLATE | $207.83 |
Out of Stock | ||
37 | ROTOR | $548.33 |
Out of Stock | ||
38 | ROTOR BLADES (SET OF 6) | $81.23 |
In Stock (Only 5 left) | ||
39 | FRONT END PLATE | $200.10 |
Out of Stock | ||
40 | BEARING | $25.09 |
Out of Stock | ||
41 | HAMMER CASE GASKET | $6.50 |
In Stock (Only 3 left) | ||
41A | DEAD HANDLE | $86.19 |
Out of Stock | ||
42 | SIDE SPADE HANDLE | $110.43 |
Out of Stock | ||
43 | MALE THREADED STUD FOR SIDE HANDLE | $52.63 |
Out of Stock | ||
44 | STUD NUT, SIDE HANDLE | $6.42 |
Out of Stock | ||
45 | BRACKET, SIDE HANDLE | $67.65 |
Out of Stock | ||
Model #IR290-6
BrandIngersoll-Rand
Tool Type1" Impact Wrench
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes Submit Order
No accessories found for this tool model.
Warranty
Warranty Duration: 2 Years
Documentation
Replacement Parts
| Ref # | Part | Price |
|---|---|---|
1 | HOUSING | $1,188.41 |
Out of Stock | ||
2 | TRIGGER | $134.87 |
Out of Stock | ||
3 | SPRING | $1.85 |
In Stock (Only 1 left) | ||
4 | TRIGGER LOCK PIN | $3.87 |
Out of Stock | ||
5 | TRIGGER BUSHING | $77.82 |
Out of Stock | ||
6 | AIR PORT GASKET | $7.68 |
In Stock | ||
7 | AIR PORT GASKET RET. | $3.87 |
In Stock | ||
8 | THROTTLE VALVE ASSY | $118.29 |
In Stock (Only 1 left) | ||
9 | THROTTLE VALVE FACE | $3.87 |
Out of Stock | ||
10 | THROTTLE VALVE PLUNGER | $25.09 |
Out of Stock | ||
11 | SPRING | $9.25 |
In Stock | ||
12 | AIR STRAINER SCREEN | $7.40 |
Out of Stock | ||
13 | STRAIGHT INLET | $66.45 |
Out of Stock | ||
14 | REVERSE VALVE BUSHING | $74.95 |
Out of Stock | ||
15 | REVERSE VALVE ASSY | $228.84 |
Out of Stock | ||
16 | SEAL | $4.30 |
In Stock (Only 1 left) | ||
17 | REVERSE LEVER | $20.12 |
Out of Stock | ||
18 | PLUNGER | $11.39 |
In Stock (Only 5 left) | ||
19 | SPRING | $1.50 |
In Stock | ||
20 | POWER REGULATOR ASSY | $97.84 |
In Stock (Only 1 left) | ||
21 | RUBBER O-RING | $3.87 |
Out of Stock | ||
22 | STEEL BALL | $3.68 |
Out of Stock | ||
23 | WASHER | $1.50 |
Out of Stock | ||
24 | SCREW | $1.50 |
Out of Stock | ||
25 | COVER | $655.56 |
Out of Stock | ||
26 | OILER ADJUSTING SCREW | $2.73 |
In Stock (Only 2 left) | ||
27 | OILER FELT | $1.64 |
In Stock | ||
28 | GREASE FITTING | $5.73 |
Out of Stock | ||
29 | OIL CHAMBER PLUG | $1.64 |
Out of Stock | ||
30 | OIL CHAMBER PLUG GASKET | $2.73 |
In Stock (Only 3 left) | ||
31 | HOUSING COVER GASKET | $10.25 |
In Stock (Only 1 left) | ||
32 | MOTOR CLAMP WASHER | $60.25 |
Out of Stock | ||
33 | CYLINDER | $543.91 |
Out of Stock | ||
34 | CYLINDER DOWEL | $12.60 |
Out of Stock | ||
35 | BEARING | $15.14 |
Out of Stock | ||
36 | REAR END PLATE | $207.83 |
Out of Stock | ||
37 | ROTOR | $548.33 |
Out of Stock | ||
38 | ROTOR BLADES (SET OF 6) | $81.23 |
In Stock (Only 5 left) | ||
39 | FRONT END PLATE | $200.10 |
Out of Stock | ||
40 | BEARING | $25.09 |
Out of Stock | ||
41 | HAMMER CASE GASKET | $6.50 |
In Stock (Only 3 left) | ||
41A | DEAD HANDLE | $86.19 |
Out of Stock | ||
42 | SIDE SPADE HANDLE | $110.43 |
Out of Stock | ||
43 | MALE THREADED STUD FOR SIDE HANDLE | $52.63 |
Out of Stock | ||
44 | STUD NUT, SIDE HANDLE | $6.42 |
Out of Stock | ||
45 | BRACKET, SIDE HANDLE | $67.65 |
Out of Stock | ||
Details
Model #IR290-6
BrandIngersoll-Rand
Tool Type1" Impact Wrench
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes Submit Order
Accessories
No accessories found for this tool model.
Warranty & Documentation
Warranty
Warranty Duration: 2 Years