Ingersoll-Rand IR293
Ingersoll-Rand IR293
This tool is unavailable for purchase, but replacement parts may be available below.
1" Drive Air Impact Wrench
Replacement Parts
Details
Accessories
Warranty & Documentation
| Ref # | Part | Price |
|---|---|---|
* | TUNE-UP KIT | $170.84 |
Out of Stock | ||
0 | 1" IMPACT WRENCH | $6,790.00 |
Out of Stock | ||
1 | HOUSING | $1,763.52 |
Out of Stock | ||
2 | BUSHING | $121.24 |
Out of Stock | ||
3 | AIR PORT GASKET | $7.68 |
Out of Stock | ||
4 | AIR PORT GASKET RET. | $4.40 |
In Stock | ||
5 | PIN IND | $5.51 |
Out of Stock | ||
6 | DEFLECTOR | $154.30 |
Out of Stock | ||
8 | THROTTLE VALVE ASSY, COMPLETE | $314.12 |
Out of Stock | ||
9 | TRIGGER | $7.16 |
In Stock (Only 3 left) | ||
10 | THROTTLE VALVE RETAINING PIN | $4.40 |
Out of Stock | ||
11 | SEAL | $4.40 |
Out of Stock | ||
11A | O-RING | $4.40 |
Out of Stock | ||
11B | O-RING | $4.95 |
Out of Stock | ||
12 | BUSHING | $148.79 |
Out of Stock | ||
13 | RING | $5.51 |
Out of Stock | ||
14 | THROTTLE VALVE SEAL | $2.75 |
Out of Stock | ||
15 | BUSHING | $259.01 |
Out of Stock | ||
16 | VALVE | $438.88 |
Out of Stock | ||
17 | SEAL | $4.95 |
Out of Stock | ||
18 | RING | $3.81 |
In Stock (Only 1 left) | ||
19 | REVERSE LEVER | $22.04 |
Out of Stock | ||
20 | PLUNGER | $12.12 |
In Stock (Only 3 left) | ||
21 | SPRING | $1.50 |
In Stock | ||
21A | DIFFUSER | $14.32 |
Out of Stock | ||
22 | SILENCER | $8.81 |
In Stock (Only 4 left) | ||
23 | COVER | $179.09 |
Out of Stock | ||
24 | SCREW | $1.50 |
In Stock (Only 3 left) | ||
25 | REGULATOR | $323.91 |
Out of Stock | ||
26 | RUBBER O-RING | $4.40 |
Out of Stock | ||
27 | STEEL BALL | $3.68 |
Out of Stock | ||
28 | WASHER | $1.50 |
Out of Stock | ||
29 | SCREW | $3.30 |
Out of Stock | ||
30 | COVER | $683.36 |
Out of Stock | ||
31 | OILER ADJUSTING SCREW | $2.73 |
In Stock (Only 2 left) | ||
32 | OILER FELT | $1.64 |
In Stock | ||
33 | GREASE FITTING | $6.61 |
In Stock (Only 4 left) | ||
34 | OIL CHAMBER PLUG | $1.64 |
Out of Stock | ||
35 | OIL CHAMBER PLUG GASKET | $2.73 |
In Stock (Only 3 left) | ||
36 | HOUSING COVER GASKET | $11.02 |
In Stock (Only 4 left) | ||
37 | MOTOR CLAMP WASHER | $66.13 |
Out of Stock | ||
39 | DOWEL | $8.81 |
In Stock (Only 1 left) | ||
38 | CYLINDER | $683.36 |
Out of Stock | ||
40 | BEARING | $16.53 |
Out of Stock | ||
41 | REAR END PLATE | $220.44 |
Out of Stock | ||
42 | ROTOR | $925.30 |
Out of Stock | ||
43 | ROTOR BLADES (SET OF 6) | $99.19 |
Out of Stock | ||
44 | FRONT END PLATE | $209.41 |
Out of Stock | ||
45 | BEARING | $26.45 |
Out of Stock | ||
46 | GASKET | $7.16 |
Out of Stock | ||
47 | BRACKET, SIDE HANDLE | $71.64 |
Out of Stock | ||
48 | HANGER SPACER | $8.81 |
In Stock (Only 1 left) | ||
51 | FRAME | $1,069.13 |
Out of Stock | ||
52 | PIN | $57.31 |
In Stock (Only 4 left) | ||
53 | HAMMER | $501.50 |
Out of Stock | ||
54 | ANVIL | $793.58 |
Out of Stock | ||
55 | 1" SPLINE ANVIL | $991.98 |
Out of Stock | ||
56 | SPRING | $7.65 |
In Stock (Only 1 left) | ||
57 | BALL IND | $6.68 |
Out of Stock | ||
58 | RETAINING BALL PLUNGER | $99.19 |
Out of Stock | ||
59 | PLUNGER RETAINING PIN | $4.40 |
Out of Stock | ||
60 | CASE | $242.10 |
Out of Stock | ||
61 | HAMMER CASE BUSHING | $42.98 |
Out of Stock | ||
62 | WASHER | $1.50 |
In Stock | ||
63 | SCREWS (SET OF 4) | $15.43 |
Out of Stock | ||
64 | 1" RETAINING RING | $12.00 |
Out of Stock | ||
Model #IR293
BrandIngersoll-Rand
Tool Type1" Impact Wrench
Powered ByAir
Weight23 lbs. / 10.43 kg
We Service? Yes Submit Order
No accessories found for this tool model.
Warranty
Warranty Duration: 1 Year
Documentation
Replacement Parts
| Ref # | Part | Price |
|---|---|---|
* | TUNE-UP KIT | $170.84 |
Out of Stock | ||
0 | 1" IMPACT WRENCH | $6,790.00 |
Out of Stock | ||
1 | HOUSING | $1,763.52 |
Out of Stock | ||
2 | BUSHING | $121.24 |
Out of Stock | ||
3 | AIR PORT GASKET | $7.68 |
Out of Stock | ||
4 | AIR PORT GASKET RET. | $4.40 |
In Stock | ||
5 | PIN IND | $5.51 |
Out of Stock | ||
6 | DEFLECTOR | $154.30 |
Out of Stock | ||
8 | THROTTLE VALVE ASSY, COMPLETE | $314.12 |
Out of Stock | ||
9 | TRIGGER | $7.16 |
In Stock (Only 3 left) | ||
10 | THROTTLE VALVE RETAINING PIN | $4.40 |
Out of Stock | ||
11 | SEAL | $4.40 |
Out of Stock | ||
11A | O-RING | $4.40 |
Out of Stock | ||
11B | O-RING | $4.95 |
Out of Stock | ||
12 | BUSHING | $148.79 |
Out of Stock | ||
13 | RING | $5.51 |
Out of Stock | ||
14 | THROTTLE VALVE SEAL | $2.75 |
Out of Stock | ||
15 | BUSHING | $259.01 |
Out of Stock | ||
16 | VALVE | $438.88 |
Out of Stock | ||
17 | SEAL | $4.95 |
Out of Stock | ||
18 | RING | $3.81 |
In Stock (Only 1 left) | ||
19 | REVERSE LEVER | $22.04 |
Out of Stock | ||
20 | PLUNGER | $12.12 |
In Stock (Only 3 left) | ||
21 | SPRING | $1.50 |
In Stock | ||
21A | DIFFUSER | $14.32 |
Out of Stock | ||
22 | SILENCER | $8.81 |
In Stock (Only 4 left) | ||
23 | COVER | $179.09 |
Out of Stock | ||
24 | SCREW | $1.50 |
In Stock (Only 3 left) | ||
25 | REGULATOR | $323.91 |
Out of Stock | ||
26 | RUBBER O-RING | $4.40 |
Out of Stock | ||
27 | STEEL BALL | $3.68 |
Out of Stock | ||
28 | WASHER | $1.50 |
Out of Stock | ||
29 | SCREW | $3.30 |
Out of Stock | ||
30 | COVER | $683.36 |
Out of Stock | ||
31 | OILER ADJUSTING SCREW | $2.73 |
In Stock (Only 2 left) | ||
32 | OILER FELT | $1.64 |
In Stock | ||
33 | GREASE FITTING | $6.61 |
In Stock (Only 4 left) | ||
34 | OIL CHAMBER PLUG | $1.64 |
Out of Stock | ||
35 | OIL CHAMBER PLUG GASKET | $2.73 |
In Stock (Only 3 left) | ||
36 | HOUSING COVER GASKET | $11.02 |
In Stock (Only 4 left) | ||
37 | MOTOR CLAMP WASHER | $66.13 |
Out of Stock | ||
39 | DOWEL | $8.81 |
In Stock (Only 1 left) | ||
38 | CYLINDER | $683.36 |
Out of Stock | ||
40 | BEARING | $16.53 |
Out of Stock | ||
41 | REAR END PLATE | $220.44 |
Out of Stock | ||
42 | ROTOR | $925.30 |
Out of Stock | ||
43 | ROTOR BLADES (SET OF 6) | $99.19 |
Out of Stock | ||
44 | FRONT END PLATE | $209.41 |
Out of Stock | ||
45 | BEARING | $26.45 |
Out of Stock | ||
46 | GASKET | $7.16 |
Out of Stock | ||
47 | BRACKET, SIDE HANDLE | $71.64 |
Out of Stock | ||
48 | HANGER SPACER | $8.81 |
In Stock (Only 1 left) | ||
51 | FRAME | $1,069.13 |
Out of Stock | ||
52 | PIN | $57.31 |
In Stock (Only 4 left) | ||
53 | HAMMER | $501.50 |
Out of Stock | ||
54 | ANVIL | $793.58 |
Out of Stock | ||
55 | 1" SPLINE ANVIL | $991.98 |
Out of Stock | ||
56 | SPRING | $7.65 |
In Stock (Only 1 left) | ||
57 | BALL IND | $6.68 |
Out of Stock | ||
58 | RETAINING BALL PLUNGER | $99.19 |
Out of Stock | ||
59 | PLUNGER RETAINING PIN | $4.40 |
Out of Stock | ||
60 | CASE | $242.10 |
Out of Stock | ||
61 | HAMMER CASE BUSHING | $42.98 |
Out of Stock | ||
62 | WASHER | $1.50 |
In Stock | ||
63 | SCREWS (SET OF 4) | $15.43 |
Out of Stock | ||
64 | 1" RETAINING RING | $12.00 |
Out of Stock | ||
Details
Model #IR293
BrandIngersoll-Rand
Tool Type1" Impact Wrench
Powered ByAir
Weight23 lbs. / 10.43 kg
We Service? Yes Submit Order
Accessories
No accessories found for this tool model.
Warranty & Documentation
Warranty
Warranty Duration: 1 Year