Ingersoll-Rand IR2940
Ingersoll-Rand IR2940
This tool is unavailable for purchase, but replacement parts may be available below.
1" Drive Air Impact Wrench
This product is obsolete; part availability is limited.
Replacement Parts
Details
Accessories
Warranty & Documentation
| Ref # | Part | Price |
|---|---|---|
1 | INSIDE TRIGGER HANDLE | $1,014.02 |
Out of Stock | ||
2 | GREASE FITTING | $6.61 |
In Stock (Only 4 left) | ||
5 | INSIDE TRIGGER | $22.04 |
Out of Stock | ||
6 | PIN | $4.40 |
In Stock (Only 3 left) | ||
7 | THROTTLE VALVE PLUNGER | $33.06 |
Out of Stock | ||
8 | THROTTLE VALVE ASSY | $126.75 |
Out of Stock | ||
9 | THROTTLE VALVE FACE | $4.40 |
Out of Stock | ||
10 | SPRING | $9.25 |
In Stock | ||
11 | STRAIGHT INLET | $71.64 |
Out of Stock | ||
12 | AIR STRAINER SCREEN | $8.81 |
Out of Stock | ||
13 | O-Ring | $4.40 |
Out of Stock | ||
15 | HOUSING COVER GASKET | $11.02 |
In Stock (Only 4 left) | ||
16 | MOTOR CLAMP WASHER | $66.13 |
Out of Stock | ||
17 | REAR END PLATE | $220.44 |
Out of Stock | ||
18 | BEARING | $16.53 |
Out of Stock | ||
19 | ROTOR | $925.30 |
Out of Stock | ||
20 | ROTOR BLADES (SET OF 6) | $99.19 |
Out of Stock | ||
21 | CYLINDER | $683.36 |
Out of Stock | ||
22 | FRONT END PLATE | $209.41 |
Out of Stock | ||
23 | BEARING | $26.45 |
Out of Stock | ||
24 | DOWEL | $8.81 |
In Stock (Only 1 left) | ||
26 | REVERSE VALVE BUSH | $181.86 |
Out of Stock | ||
27 | AIR PORT GASKET RET. | $4.40 |
In Stock | ||
27A | DEFLECTOR | $42.98 |
Out of Stock | ||
27B | SILENCER | $8.81 |
In Stock (Only 4 left) | ||
27C | EXHAUST BAFFLE | $11.02 |
Out of Stock | ||
27D | GASKET | $4.40 |
Out of Stock | ||
27E | SCREW | $8.00 |
Out of Stock | ||
27G | NAMEPLATE SCREW | $5.43 |
Out of Stock | ||
28 | REVERSE LEVER | $22.04 |
Out of Stock | ||
29 | PLUNGER | $12.12 |
In Stock (Only 3 left) | ||
30 | SPRING | $1.50 |
In Stock | ||
31 | REVERSE VALVE ASSY | $198.39 |
Out of Stock | ||
32 | SEAL | $4.95 |
Out of Stock | ||
33 | CASE | $799.09 |
Out of Stock | ||
34 | HAMMER CASE BUSHING | $42.98 |
Out of Stock | ||
34A | LABEL | $5.51 |
Out of Stock | ||
35 | HAMMER CASE GASKET | $7.16 |
In Stock (Only 2 left) | ||
36 | SCREWS (SET OF 4) | $15.43 |
Out of Stock | ||
37 | WASHER | $1.50 |
In Stock | ||
38 | SCREW | $3.30 |
Out of Stock | ||
39 | WASHER | $1.50 |
Out of Stock | ||
40 | FRAME | $1,069.13 |
Out of Stock | ||
41 | PIN | $57.31 |
In Stock (Only 4 left) | ||
42 | HAMMER | $501.50 |
Out of Stock | ||
43 | 1" SPLINE ANVIL | $991.98 |
Out of Stock | ||
44 | BALL IND | $6.68 |
Out of Stock | ||
45 | RETAINING BALL PLUNGER | $99.19 |
Out of Stock | ||
46 | SPRING | $7.65 |
In Stock (Only 1 left) | ||
47 | PLUNGER RETAINING PIN | $4.40 |
Out of Stock | ||
48 | ANVIL | $793.58 |
Out of Stock | ||
48 | ANVIL | $562.12 |
Out of Stock | ||
49 | 1" RETAINING RING | $12.00 |
Out of Stock | ||
50 | OUTSIDE TRIGGER HANDLE | $1,168.33 |
Out of Stock | ||
51 | LEVER | $126.75 |
Out of Stock | ||
53 | DEAD HANDLE | $93.68 |
Out of Stock | ||
54 | BRACKET, SIDE HANDLE | $71.64 |
Out of Stock | ||
55 | HANGER SPACER | $8.81 |
In Stock (Only 1 left) | ||
Model #IR2940
BrandIngersoll-Rand
Tool Type1" Impact Wrench
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes Submit Order
No accessories found for this tool model.
Warranty
Warranty Duration: 2 Years
Documentation
Replacement Parts
| Ref # | Part | Price |
|---|---|---|
1 | INSIDE TRIGGER HANDLE | $1,014.02 |
Out of Stock | ||
2 | GREASE FITTING | $6.61 |
In Stock (Only 4 left) | ||
5 | INSIDE TRIGGER | $22.04 |
Out of Stock | ||
6 | PIN | $4.40 |
In Stock (Only 3 left) | ||
7 | THROTTLE VALVE PLUNGER | $33.06 |
Out of Stock | ||
8 | THROTTLE VALVE ASSY | $126.75 |
Out of Stock | ||
9 | THROTTLE VALVE FACE | $4.40 |
Out of Stock | ||
10 | SPRING | $9.25 |
In Stock | ||
11 | STRAIGHT INLET | $71.64 |
Out of Stock | ||
12 | AIR STRAINER SCREEN | $8.81 |
Out of Stock | ||
13 | O-Ring | $4.40 |
Out of Stock | ||
15 | HOUSING COVER GASKET | $11.02 |
In Stock (Only 4 left) | ||
16 | MOTOR CLAMP WASHER | $66.13 |
Out of Stock | ||
17 | REAR END PLATE | $220.44 |
Out of Stock | ||
18 | BEARING | $16.53 |
Out of Stock | ||
19 | ROTOR | $925.30 |
Out of Stock | ||
20 | ROTOR BLADES (SET OF 6) | $99.19 |
Out of Stock | ||
21 | CYLINDER | $683.36 |
Out of Stock | ||
22 | FRONT END PLATE | $209.41 |
Out of Stock | ||
23 | BEARING | $26.45 |
Out of Stock | ||
24 | DOWEL | $8.81 |
In Stock (Only 1 left) | ||
26 | REVERSE VALVE BUSH | $181.86 |
Out of Stock | ||
27 | AIR PORT GASKET RET. | $4.40 |
In Stock | ||
27A | DEFLECTOR | $42.98 |
Out of Stock | ||
27B | SILENCER | $8.81 |
In Stock (Only 4 left) | ||
27C | EXHAUST BAFFLE | $11.02 |
Out of Stock | ||
27D | GASKET | $4.40 |
Out of Stock | ||
27E | SCREW | $8.00 |
Out of Stock | ||
27G | NAMEPLATE SCREW | $5.43 |
Out of Stock | ||
28 | REVERSE LEVER | $22.04 |
Out of Stock | ||
29 | PLUNGER | $12.12 |
In Stock (Only 3 left) | ||
30 | SPRING | $1.50 |
In Stock | ||
31 | REVERSE VALVE ASSY | $198.39 |
Out of Stock | ||
32 | SEAL | $4.95 |
Out of Stock | ||
33 | CASE | $799.09 |
Out of Stock | ||
34 | HAMMER CASE BUSHING | $42.98 |
Out of Stock | ||
34A | LABEL | $5.51 |
Out of Stock | ||
35 | HAMMER CASE GASKET | $7.16 |
In Stock (Only 2 left) | ||
36 | SCREWS (SET OF 4) | $15.43 |
Out of Stock | ||
37 | WASHER | $1.50 |
In Stock | ||
38 | SCREW | $3.30 |
Out of Stock | ||
39 | WASHER | $1.50 |
Out of Stock | ||
40 | FRAME | $1,069.13 |
Out of Stock | ||
41 | PIN | $57.31 |
In Stock (Only 4 left) | ||
42 | HAMMER | $501.50 |
Out of Stock | ||
43 | 1" SPLINE ANVIL | $991.98 |
Out of Stock | ||
44 | BALL IND | $6.68 |
Out of Stock | ||
45 | RETAINING BALL PLUNGER | $99.19 |
Out of Stock | ||
46 | SPRING | $7.65 |
In Stock (Only 1 left) | ||
47 | PLUNGER RETAINING PIN | $4.40 |
Out of Stock | ||
48 | ANVIL | $793.58 |
Out of Stock | ||
48 | ANVIL | $562.12 |
Out of Stock | ||
49 | 1" RETAINING RING | $12.00 |
Out of Stock | ||
50 | OUTSIDE TRIGGER HANDLE | $1,168.33 |
Out of Stock | ||
51 | LEVER | $126.75 |
Out of Stock | ||
53 | DEAD HANDLE | $93.68 |
Out of Stock | ||
54 | BRACKET, SIDE HANDLE | $71.64 |
Out of Stock | ||
55 | HANGER SPACER | $8.81 |
In Stock (Only 1 left) | ||
Details
Model #IR2940
BrandIngersoll-Rand
Tool Type1" Impact Wrench
Powered ByAir
Weight3 lbs. / 1.36 kg
We Service? Yes Submit Order
Accessories
No accessories found for this tool model.
Warranty & Documentation
Warranty
Warranty Duration: 2 Years